Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Epoxy/epoxies brominated

Figure 7.38 Epoxy structures (1) bisphenol-A-based epoxy, (2) brominated bisphenol-A-based epoxy, and (3) siloxane epoxy. Figure 7.38 Epoxy structures (1) bisphenol-A-based epoxy, (2) brominated bisphenol-A-based epoxy, and (3) siloxane epoxy.
Two-layered GRPs for copper clad laminates are obtained with one layer consisting of the three-component system (e.g. BPA/DC, BMI, brominated epoxide resin, Zn octoate and triethylenediamine in methylethylketone). The other layer has the usual epoxy matrix (brominated epoxide resin, dicyandiamide as a hardener and 2-ethyl-4-methylimidazole as curing accelerator) [119]. As similar two-layered laminate contains BPA/DC, BMI, epoxynovolak resin, Zn acetate and triethylenediamine in the first layer and BPA/DC only with the same catalysts in the second layer [120]. [Pg.55]

Goobich, J., and Marom, G., Moisture Absorption by Tetraglycidyl 4,4/-Diaminodiphenyl Methane/4,4 Diamino-diphenyl Sulfone Epoxies Containing Brominated Epoxy Copolymers, Polymer Engineering and Science, vol. 22, 1982, p. 1052. [Pg.340]

In electronic encapsulation applications, epoxy derivatives of novolacs containing meta-bromo phenol have exhibited substantially better physical and performance properties compared to the conventional tetrabromo bisphenol-A epoxies and brominated epoxy novolacs. The meta-bromo phenol moiety contributes the expected improvements in thermal and hydrolytic stability to the formulation while providing fire retardancy properties (13). [Pg.397]

Later, McPherson (39) demonstrated that the Inclusion of a CTBN/liquid epoxy adduct enhanced both the flexibility and adhesion of a dimer acid flexibllized epoxy/brominated epoxy mixture when cured with a combination of chlorendic and nadic-methyl anhydrides. With an epoxy-glass laminate as substrate, such mixtures were coated at 0.5-2.0 mils thickness, cured, sensitized and copper plated (1.5 mils) by an electroless process. 90 peel testing (2 inches/mln. rate, 25 C) gave 14.0 pli peel force where 5.0 pli is considered normal. [Pg.9]

There is very little information about halogenated aliphatic and cycloaliphatic epoxy compounds. Brominated epoxy compounds were prepared by the addition of Br to the cyclohexenyl double bond in a diglycidyl ether in mild conditions (Scheme 60) [39]. [Pg.81]

Bis-(3, 5-dibrom-4- lycidoxyphenyl) propan 2,2-Bis (3,5-dihrotno-4-(2,3-epoxypropoxy) enyO propane. See Epoxy resin, brominated... [Pg.995]

Dynasylan 1411 Silquest A-2120 3072-84-2 D.E.R. 542 EPON Resin 1183 EPON Resin 5183 Epoxy resin, brominated F-2200 3076-04-8 SR 489 Tridecy... [Pg.1761]

CY179] CY184] CY192-1. See Epoxy resin CY 8043. See Epoxy resin, brominated CY 9729] CY 9739. See Epoxy resin Cyagard RF-1204. See 1,4-Diisobutyl-1,4-diphosphoryl-2,3,5,6-tetrahydroxycyclohexane Cyagard RF-1241. See Isobutylbis (hydroxymethyl) phosphine oxide Cyagard RF-1243. See Isobutylbis (hydroxypropyl) phosphine oxide Cyamelurotriamide CAS 1502-47-2... [Pg.1105]

Epolite 9925 Epolite 9935. See Epoxy resin Epomin P-1000. See PEI-1750 Epomin SP-006. See PEI-15 Epomin SP-012. See PEI-30 Epomin SP-018. See PEI-45 EPON HPT Resin 1077. See Tetraglycidyl-4,4 -methylene dianiline EPON HPT Resin 1079. See Epoxy resin EPON Resin 164. See Epoxy cresol novolac EPON Resin 825 EPON Resin 826 EPON Resin 828. See Epoxy, bisphenol A EPON Resin 832. See Epoxy resin EPON Resin 1001F EPON Resin 1002F EPON Resin 1004F EPON Resin 1007F EPON Resin 1009F. See Epoxy, bisphenol A EPON Resin 1031. See Epoxy-novolac EPON Resin 1183. See Epoxy resin, brominated... [Pg.1633]

EPON Resin 2002 EPON Resin 2003 EPON Resin 2004 EPON Resin 2005 EPON Resin 2012 EPON Resin 2014 EPON Resin 2022 EPON Resin 2042 EPON Resin 3001 EPON Resin 3002. See Epoxy resin EPON Resin 5183. See Epoxy resin, brominated... [Pg.1633]

Epotuf 37-151. See Epoxy resin Epotuf 37-170. See Epoxy-novolac Epotuf 37-200. See Epoxy resin, brominated Epotuf 37-250. See Epoxy resin Epotuf 37-600, Epotuf 37-615, Epotuf 37-617. See Polyamide... [Pg.1634]

Epoxy resin. See Epoxy, bisphenol A/epichlorohydrin Epoxy resin, brominated CAS 3072-84-2... [Pg.1651]

See Aluminum hydroxide F-2000 FR. See Epoxy resin, brominated F-2000. See Stearic acid F-2000 . See Aluminum hydroxide F-2001] F-2016. See Epoxy resin, brominated F-2100 . See Aluminum hydroxide F-2200. See Epoxy resin, brominated F-2200 . See Aluminum hydroxide F-2300. See Epoxy resin, brominated F-2300 . See Aluminum hydroxide... [Pg.1793]

Quatrex 2410. See Epoxy-novolac Quatrex 2710, Quatrex 3310, Quatrex 3330, Quatrex 3410, Quatrex 3430, Quatrex 3431] Quatrex 3710, Quatrex 3711. See Epoxy resin Quatrex 6410. See Epoxy resin, brominated Quatrex 7187. See Epoxy resin Quatrex CTAC. See Cetrimonium chloride Quatrex S. See Soyamidopropalkonium chloride... [Pg.3808]

Thermoguard 210 Thermoguard 220] Thermoguard 230, Thermoguard 240. See Epoxy resin, brominated Thermoguar 505. See Decabromodiphenyl oxide... [Pg.4404]

Tetrabromobisphenol A di-2-hydroxyethyl ether Tetradecabromodiphenoxybenzene Tetrakis (2-chloroethyl) ethylene diphosphate Tris (2,3-dichloropropyl) phosphate flame retardant, EPS Tribromophenyl allyl ether flame retardant, ethyl cellulose Diphenyl octyl phosphate flame retardant, ethylene copolymers Ethylenebis (tetrabromophthalimide) flame retardant, expandable PS Dibromoethyidibromocyclohexane Tetrabromobisphenol A bis (allyl ether) Tetrabromocyclooctane flame retardant, extruded PS Tetrabromocyclooctane flame retardant, fabrics Antimony pentoxide Methylphosphonic acid, (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphorinan-5-yl) methyl methyl ester flame retardant, fibers Antimony pentoxide Tetrabromoethane flame retardant, filament winding Epoxy resin, brominated flame retardant, film Tetrabromobis (2-ethylhexyl) phthalate flame retardant, fire-retardant material Chlorinated paraffins (C12, 60% chlorine) Chlorinated paraffins (C23, 43% chlorine) flame retardant, flexible PU foam bedding Tetrakis (2-chloroethyl) ethylene diphosphate flame retardant, flexible PU foam furniture Tetrakis (2-chloroethyl) ethylene diphosphate flame retardant, flexible PU foam transportation Tetrakis (2-chloroethyl) ethylene diphosphate flame retardant, flexible PU foams furniture, automobile seating... [Pg.5263]

Poiydibromophenyiene oxide fiame retardant, thermoplastic polyesters Decabromodiphenyi oxide Ethylenebis (tetrabromophthalimide) Resorcinol bis (diphenyiphosphate) Tris (2,4-dibromophenyl) phosphate fiame retardant, thermoplastics Bis (tribromophenoxy) ethane 1,4-Diisobutyl-1,4-diphosphoryl-2,3,5,6-tetrahydroxycyclohexane Epoxy resin, brominated Perchioropentacyciodecane ... [Pg.5267]

Diallyl bisphenol A C21 H24Br404 Epoxy resin, brominated C21H24N8 Basic brown 4 C21H24O4... [Pg.7108]

Polymeric epoxy resins Brominated flame retardants - [24]... [Pg.79]

Figure E. 2 General chemical structures of epoxy novolac, cycloaliphatic epoxy, and brominated epoxy. Figure E. 2 General chemical structures of epoxy novolac, cycloaliphatic epoxy, and brominated epoxy.
In a PRCB factory, Bruze and Almgren (1989) found 6 workers of the 19 tested were sensitized to epoxy resin. During the production of manufactured articles (made of copper sheets and rolled fiberglass soaked with epoxy brominated resins), subjects were exposed mainly to such nonpolymerized resins and to powders from fiberglass tissues soaked with resins. [Pg.132]

As a component of non-diglycidyl ether-of-bisphenol-A epoxy resins, brominated epoxy resin caused contact dermatitis in a cleaner of worksites in a condenser factory, in which condensers were filled with a mixture made of an epoxy resin. [Pg.1132]

Pig. 1. Major epoxy resin and derivatives markets (10 MT).H LER H SER D epoxy novolacs D other multifunctional epoxies brominated epoxies El cycloaliphatic vinyl esters andG epoxy acrylates. [Pg.2663]

Synthesis of (A) started with the combination of 2,4,6-trimethylphenol and allyl bromide to give the or/Ao-allyl dienone. Acid-catalyzed rearrangement and oxidative bydroboration yielded the dienone with a propanol group in porlactone ring were irons in the product as expected (see p. 275). Treatment with aqueous potassium hydroxide gave the epoxy acid, which formed a crystalline salt with (R)-l-(or-naphthyl)ethylamine. This was recrystallized to constant rotation. [Pg.319]

TetrabromobisphenolA. TBBPA is the largest volume reactive flame retardant. Its primary use is in epoxy resins (see Epoxyresins) where it is reacted with the bis-glycidyl ether of bisphenol A to produce an epoxy resin having 20—25% bromine. This brominated resin is typically sold as a 80% solution in a solvent. TBBPA is also used in the production of epoxy oligomers which are used as additive flame retardants. [Pg.470]

See other pages where Epoxy/epoxies brominated is mentioned: [Pg.469]    [Pg.324]    [Pg.222]    [Pg.412]    [Pg.1104]    [Pg.1104]    [Pg.1528]    [Pg.1529]    [Pg.1189]    [Pg.1591]    [Pg.1631]    [Pg.1794]    [Pg.5262]    [Pg.5262]    [Pg.5263]    [Pg.5267]    [Pg.6209]    [Pg.201]    [Pg.1683]    [Pg.143]    [Pg.19]    [Pg.141]    [Pg.254]    [Pg.130]   
See also in sourсe #XX -- [ Pg.20 ]



SEARCH



Brominated epoxy

© 2024 chempedia.info