Engineering Council

Installation. Installation of each new PSM system will occur after the pilot test phase. Documentation on the procedure will be circulated, and the procedure will be described at a meeting of the company Engineering Council. 

The Institution s permanent staff is always available to give help and advice on matters relating to membership, education and training, and Engineering Council registration. 

An individual engineer s registration with the Engineering Council is a further valuable indication of professional attainment and standing. Royal Charter established the Engineering Council in 1981 to ... 

The Charter empowers The Engineering Council to establish and maintain a Register of qualified engineers. The registrants may, where appropriate, use one of the following titles and designatory letters ... 

The Institution of Plant Engineers is a Nominated Body of the Engineering Council (EC) and is thus able to nominate members in appropriate membership grades for EC registration. 

The Engineering Council places considerable emphasis on CET as an essential part of a professional engineer s development, anticipating that in due course CET will form a normal part of an engineer s career and that such CET activity will be noted in his or her personal career record. 

The Engineering Council Canberra House Maltravers Street London WC2R 3ER Telephone 020-7249 7891... 

Phosphors for CRTs are predominantly based on zinc and cadmium sulfides. Selected CRT phosphors are listed in Table 1 which also includes their precursors, their P-numbers , and their uses. (The system used to classify CRT phosphors came from JEDEC, the former Joint Electronic Device Engineering Council, now JT- Committee on Phosphor and Optical Characteristics within the Electronic Industries Association. JEDEC established the original code for these phosphors in terms of P-numbers .8 Many manufacturers of CRTs use these when specifying phosphor screen characteristics.) Although the precursors are tabulated, the mole ratios used in the syntheses are not. 

Acknowledgements We like to thank Dr. David W. Malloch and the Forest Soil Laboratory team at UNB for valuable support during this study. This work was funded by Collaborative Mercury Research Network (COMERN), sponsored by the National Science and Engineering Council of Canada (NSERC). 

The financial supports of the Natural Sciences and Engineering Council of Canada and Canada Foundation for Innovation are gratefully acknowledged. 

The authorized inspector shall have a minimum of 10 years experience in the design, fabrication, or inspection of industrial pressure piping. Each 20 percent of satisfactory work toward an engineering degree accredited by the Engineers Council for Professional Development shall be considered equivalent to 1 year s experience, up to 5 years total. 

We would like to acknowledge the continued support of our research by the Natural Science and Engineering Council of Canada and the University of Western Ontario. 

This work was supported by the Protein Engineering Network of Centres of Excellence (PENCE) of Canada, which is funded by the Natural Sciences and Engineering Council and Medical Research Council. The author is the recipient of a Scientist career award from the Medical Research Council of Canada. The author acknowledges the technical assistance of Philip Owen, Michael Williams, and Luan Vo in the synthesis and characterization of BCA-1. 

Acknowledgement The author gratefully acknowledges financial support for this work from the National Science and Engineering Council of Canada. 

We would like to thank Dr. K. O Brien, Dow Chemical USA, Walnut Creek Research Center, CA Dr. G. R. Husk, U.S. Army Research Office, Research Triangle Park, NC and Prof. W.J. Koros, University of Texas, Austin for synthesizing and preparing the PMDA and 6FDA based polyimide films used in the Structural Effects sections of this paper. This work was supported in part by the Stanford Institute for Manufacturing and Automation. P. S. M. would like to thank the Natural Sciences and Engineering Council of Canada for a postdoctoral fellowship. 

L. M.B -T and D.C.M would like to thank the National Sciences and Engineering Council of Canada for financial support. C.M - C and A.N. acknowledge financial support from the Universidad de Castilla LaMancha. 

The authors would like to thank Nortel Networks and the Natural Sciences and Engineering Council (NSERC) of Canada for funding this project. 

E. Altman, which have been instrumental and have led to the applications and development of the methods described herein. We thank Andee Cravel for obtaining the MS spectrum (Figure 8). We thank M. Perry for providing O-PS of S. riograndeOAQ. The authors also acknowledge funding support from the Natural Sciences and Engineering Council of Canada (NSERC), the Canadian Water Network, and Alberta Health and Wellness. 

Camille L. A. Hamula obtained her B.Sc. degree in microbiology in 2003 from the University of Alberta and is currently pursuing her Ph.D. in medical sciences. Co-supervised by Dr. Chris Le and Dr. Xing-Fang Li and supported by scholarships from the Natural Sciences and Engineering Council of Canada and the Alberta Heritage Foundation for Medical Research, she focuses her research on the selection and applications of novel DNA aptamers for bacterial cells. 

MEPTEC Microelectronics Packaging and Test Engineering Council... 

Fans Tarlochan is currently holding the position of Professor and Program Coordinator in the Department of Mechanical and Industrial Engineering, Qatar University. He is a Fellow with the Institution of Mechanical Engineering UK and a registered Chartered Engineering with the Engineering Council of UK. 

---