Enantiomerically pure synthesis

The first enantiomerically pure synthesis of the antitumor compound quadrone has been developed by Smith and coworkers103, via photoaddition of isobutylene to 218 followed by epimerization affording the desired photoproduct 219a in 5 1 ratio with its diastereomer in 74% yield. The synthesis of (+)-enantioquadrone was completed via kinetic resolution of 219a (Scheme 47). 

The 9,11-seco steroid (68) was formed with the desired natural (135,145) absolute stereochemistry. Conversion of a racemic sample of (68) into racemic steroidal equilenin (69) was used to demonstrate the potential of this methodology for the total synthesis of enantiomerically pure steroidal material of natural configuration, although an enantiomerically pure synthesis was not performed [46]. 

Clearly, there is a need for techniques which provide access to enantiomerically pure compounds. There are a number of methods by which this goal can be achieved . One can start from naturally occurring enantiomerically pure compounds (the chiral pool). Alternatively, racemic mixtures can be separated via kinetic resolutions or via conversion into diastereomers which can be separated by crystallisation. Finally, enantiomerically pure compounds can be obtained through asymmetric synthesis. One possibility is the use of chiral auxiliaries derived from the chiral pool. The most elegant metliod, however, is enantioselective catalysis. In this method only a catalytic quantity of enantiomerically pure material suffices to convert achiral starting materials into, ideally, enantiomerically pure products. This approach has found application in a large number of organic... 

An efficient enantioselective route for the total synthesis of ginkgolide B has been established by synthesizing the key intermediate A in an enantiomerically pure form (Ref. 2),... 

A synthesis for the enantiomerically pure 535 was developed starting with D-phenylalanine which upon reaction with methyl chloroformate gave 528 whose reaction with methoxylamine afforded 529. Cyclization with bis(trifluoroacetoxy)iodobenzene in presence of trifluoroacetic acid gave the tetrahydroquinoline derivative 530 which was demethoxylated to give 531. Treatment of 531 with either benzyl chloroformate or... 

Asymmetric synthesis is a stimulating academic challenge, but since it has become clear that most chiral drugs can be administered safely only in the enantiomerically pure form, the industrial need for asymmetric methods has made research in asymmetric synthesis absolutely necessary [5]. This has driven a renaissance in the discipline of organic chemistry, because all of the old-established reactions need to be reinvestigated for their application in asymmetric synthesis [6]. This has also applied... 

For the performance of an enantioselective synthesis, it is of advantage when an asymmetric catalyst can be employed instead of a chiral reagent or auxiliary in stoichiometric amounts. The valuable enantiomerically pure substance is then required in small amounts only. For the Fleck reaction, catalytically active asymmetric substances have been developed. An illustrative example is the synthesis of the tricyclic compound 17, which represents a versatile synthetic intermediate for the synthesis of diterpenes. Instead of an aryl halide, a trifluoromethanesul-fonic acid arylester (ArOTf) 16 is used as the starting material. With the use of the / -enantiomer of 2,2 -Z7w-(diphenylphosphino)-l,F-binaphthyl ((R)-BINAP) as catalyst, the Heck reaction becomes regio- and face-selective. The reaction occurs preferentially at the trisubstituted double bond b, leading to the tricyclic product 17 with 95% ee. °... 

Although very efficient, the broad application of the direct preparation is restricted due to the limited number of pure starting enantiomers. The design of a multistep process that includes asymmetric synthesis is cumbersome and the development costs may be quite high. This approach is likely best suited for the multi-ton scale production of commodity enantiomers such as the drugs ibuprofen, naproxen, atenolol, and albuterol. However, even the best asymmetric syntheses do not lead to products in an enantiomerically pure state (100 % enantiomeric excess). Typically, the product is enriched to a certain degree with one enantiomer. Therefore, an additional purification step may be needed to achieve the required enantiopurity. 

Two methods are used in practice to obtain enantiomerically pure amino acids. One way is to resolve the racemic mixture into its pure enantiomers (Section 9.8). A more direct approach, however, is to use an enantioselective synthesis to prepare only the desired 5 enantiomer directly. As discussed in the Chapter 19 Focus Oil, the idea behind enantioselective synthesis is to find a chiral reaction catalyst that will temporarily hold a substrate molecule in an unsymmetrical environment. While in that chiral environment, the substrate may be more... 

Schemes 3-7 describe the synthesis of cyanobromide 6, the A-D sector of vitamin Bi2. The synthesis commences with an alkylation of the magnesium salt of methoxydimethylindole 28 to give intermediate 29 (see Scheme 3a). The stereocenter created in this step plays a central role in directing the stereochemical course of the next reaction. Thus, exposure of 29 to methanol in the presence of BF3 and HgO results in the formation of tricyclic ketone 22 presumably through the intermediacy of the derived methyl enol ether 30. It is instructive to point out that the five-membered nitrogen-containing ring in 22, with its two adjacent methyl-bearing stereocenters, is destined to become ring A of vitamin Bi2. A classical resolution of racemic 22 with a-phenylethylisocyanate (31) furnishes tricyclic ketone 22 in enantiomerically pure form via diaster-eomer 32.

The synthesis of key intermediate 12, in optically active form, commences with the resolution of racemic trans-2,3-epoxybutyric acid (27), a substance readily obtained by epoxidation of crotonic acid (26) (see Scheme 5). Treatment of racemic 27 with enantio-merically pure (S)-(-)-1 -a-napthylethylamine affords a 1 1 mixture of diastereomeric ammonium salts which can be resolved by recrystallization from absolute ethanol. Acidification of the resolved diastereomeric ammonium salts with methanesulfonic acid and extraction furnishes both epoxy acid enantiomers in eantiomerically pure form. Because the optical rotation and absolute configuration of one of the antipodes was known, the identity of enantiomerically pure epoxy acid, (+)-27, with the absolute configuration required for a synthesis of erythronolide B, could be confirmed. Sequential treatment of (+)-27 with ethyl chloroformate, excess sodium boro-hydride, and 2-methoxypropene with a trace of phosphorous oxychloride affords protected intermediate 28 in an overall yield of 76%. The action of ethyl chloroformate on carboxylic acid (+)-27 affords a mixed carbonic anhydride which is subsequently reduced by sodium borohydride to a primary alcohol. Protection of the primary hydroxyl group in the form of a mixed ketal is achieved easily with 2-methoxypropene and a catalytic amount of phosphorous oxychloride. 

Having retraced the efficient and elegant sequences of reactions that have led to the synthesi of key intermediates 11 and 12, we are now in a position to address their union and the completion of the total synthesis of erythronolide B. Taken together, intermediates 11 and 12 contain all of the carbon atoms of erythronolide B, and although both are available in optically active form of the required absolute configuration, racemic 11 and enantiomerically pure 12... 

The synthesis of intermediate 19 commences with aldehyde 33 (see Scheme 5b), a substance readily available in enantiomerically pure form from (+)-/ -hydroxyisobutyric acid (11)20. Exposure of... 

Merck s thienamycin synthesis commences with mono (V-silylation of dibenzyl aspartate (13, Scheme 2), the bis(benzyl) ester of aspartic acid (12). Thus, treatment of a cooled (0°C) solution of 13 in ether with trimethylsilyl chloride and triethylamine, followed by filtration to remove the triethylamine hydrochloride by-product, provides 11. When 11 is exposed to the action of one equivalent of tm-butylmagnesium chloride, the active hydrogen attached to nitrogen is removed, and the resultant anion spontaneously condenses with the electrophilic ester carbonyl four atoms away. After hydrolysis of the reaction mixture with 2 n HC1 saturated with ammonium chloride, enantiomerically pure azetidinone ester 10 is formed in 65-70% yield from 13. Although it is conceivable that... 

In a catalytic asymmetric reaction, a small amount of an enantio-merically pure catalyst, either an enzyme or a synthetic, soluble transition metal complex, is used to produce large quantities of an optically active compound from a precursor that may be chiral or achiral. In recent years, synthetic chemists have developed numerous catalytic asymmetric reaction processes that transform prochiral substrates into chiral products with impressive margins of enantio-selectivity, feats that were once the exclusive domain of enzymes.56 These developments have had an enormous impact on academic and industrial organic synthesis. In the pharmaceutical industry, where there is a great emphasis on the production of enantiomeri-cally pure compounds, effective catalytic asymmetric reactions are particularly valuable because one molecule of an enantiomerically pure catalyst can, in principle, direct the stereoselective formation of millions of chiral product molecules. Such reactions are thus highly productive and economical, and, when applicable, they make the wasteful practice of racemate resolution obsolete. 

The emergence of the powerful Sharpless asymmetric epoxida-tion (SAE) reaction in the 1980s has stimulated major advances in both academic and industrial organic synthesis.14 Through the action of an enantiomerically pure titanium/tartrate complex, a myriad of achiral and chiral allylic alcohols can be epoxidized with exceptional stereoselectivities (see Chapter 19 for a more detailed discussion). Interest in the SAE as a tool for industrial organic synthesis grew substantially after Sharpless et al. discovered that the asymmetric epoxidation process can be conducted with catalytic amounts of the enantiomerically pure titanium/tartrate complex simply by adding molecular sieves to the epoxidation reaction mix-... 

The synthesis of the E-ring intermediate 20 commences with the methyl ester of enantiomerically pure L-serine hydrochloride (22) (see Scheme 9). The primary amino group of 22 can be alkylated in a straightforward manner by treatment with acetaldehyde, followed by reduction of the intermediate imine with sodium borohydride (see 22 —> 51). The primary hydroxyl and secondary amino groups in 51 are affixed to adjacent carbon atoms. By virtue of this close spatial relationship, it seemed reasonable to expect that the simultaneous protection of these two functions in the form of an oxazolidi-none ring could be achieved. Indeed, treatment of 51 with l,l -car-bonyldiimidazole in refluxing acetonitrile, followed by partial reduction of the methoxycarbonyl function with one equivalent of Dibal-H provides oxazolidinone aldehyde 52. 

A similar Evans asymmetric aldol/reduction sequence could also serve well in a synthesis of fragment 158. Compounds 161 and 162 thus emerge as potential precursors to 158. In theory, building blocks 161 and 162 could be procured in optically active form from commercially available and enantiomerically pure (+)-/ -citro-nellene (163) and D-mannitol (164), respectively (see Scheme 42). 

The interest in asymmetric synthesis that began at the end of the 1970s did not ignore the dihydroxylation reaction. The stoichiometric osmylation had always been more reliable than the catalytic version, and it was clear that this should be the appropriate starting point. Criegee had shown that amines, pyridine in particular, accelerated the rate of the stoichiometric dihydroxylation, so it was understandable that the first attempt at nonenzymatic asymmetric dihydroxylation was to utilize a chiral, enantiomerically pure pyridine and determine if this induced asymmetry in the diol. This principle was verified by Sharpless (Scheme 7).20 The pyridine 25, derived from menthol, induced ee s of 3-18% in the dihydroxylation of /rcms-stilbene (23). Nonetheless, the ee s were too low and clearly had to be improved. 

Especially in the early steps of the synthesis of a complex molecule, there are plenty of examples in which epoxides are allowed to react with organometallic reagents. In particular, treatment of enantiomerically pure terminal epoxides with alkyl-, alkenyl-, or aryl-Grignard reagents in the presence of catalytic amounts of a copper salt, corresponding cuprates, or metal acetylides via alanate chemistry, provides a general route to optically active substituted alcohols useful as valuable building blocks in complex syntheses. 

---