Emulsion polymerization oligomeric radicals

The progression of an ideal emulsion polymerization is considered in three different intervals after forming primary radicals and low-molecular weight oligomers within the water phase. In the first stage (Interval I), the polymerization progresses within the micelle structure. The oligomeric radicals react with the individual monomer molecules within the micelles to form short polymer chains with an ion radical on one end. This leads to the formation of a new phase (i.e., polymer latex particles swollen with the monomer) in the polymerization medium. 

The concentration of monomers in the aqueous phase is usually very low. This means that there is a greater chance that the initiator-derived radicals (I ) will undergo side reactions. Processes such as radical-radical reaction involving the initiator-derived and oligomeric species, primary radical termination, and transfer to initiator can be much more significant than in bulk, solution, or suspension polymerization and initiator efficiencies in emulsion polymerization are often very low. Initiation kinetics in emulsion polymerization are defined in terms of the entry coefficient (p) - a pseudo-first order rate coefficient for particle entry. 

In normal emulsion polymerization the diffusion of monomers from droplets allows particles to grow. The polymerization is usually initiated in the aqueous phase and the oligomeric radicals either enter micelles or merge with other growing species. In the crosslinking ECP of EUP the ratio EUP/comonomer and the solubility or insolubility of both components and the initiator in the aqueous and non-aqueous phases respectively are parameters which decide whether diffusion of the reactants in the aqueous phase plays a role and where the initiation takes place. 

Polymerization of the monomer in solution undoubtedly takes place but does not contribute significantly, since the monomer concentration is low and propagating radicals would precipitate out of aqueous solution at very small (oligomeric) size. The micelles act as a meeting place for the organic (oil-soluble) monomer and the water-soluble initiator. The micelles are favored as the reaction site because of their high monomer concentration (similar to bulk monomer concentration) compared to the monomer in solution. As polymerization proceeds, the micelles grow by the addition of monomer from the aqueous solution whose concentration is replenished by dissolution of monomer from the monomer droplets. A simplified schematic representation of an emulsion polymerization system is shown in Fig. 4-1. The system consists of three types of particles monomer droplets, inactive micelles in which... 

It should be noted that the degree of polymerization in an emulsion polymerization is synonymous with the kinetic chain length. Although termination is by bimolecular coupling, one of the radicals is a primary (or oligomeric) radical, which does not significantly contribute to the size of a dead polymer molecule. The derivation of Eq. 4-7 assumes the absence... 

The emulsion polymerization system consists of three phases an aqueous phase (containing initiator, emulsifier, and some monomer), emulsified monomer droplets, the monomer-swollen micelles, and monomer-swollen particles. Water is the most important ingredient of the emulsion polymerization system. It is inert and acts as the locus of initiation (the formation of primary and oligomeric radicals) and the medium of transfer of monomer and emulsifier from monomer droplets or the monomer-swollen particle micelles to particles. An aqueous phase maintains a low viscosity and provides an efficient heat transfer. 

In accordance with the Smith-Ewart theory, the nucleation of particles takes place solely in the monomer-swollen micelles which are transformed into polymer particles [16]. This mechanism is applicable for hydrophobic (macro)mon-omers (see Scheme 2). The initiation of emulsion polymerization is a two-step process. It starts in water with the primary free radicals derived from the water-soluble initiator. The second step occurs in the monomer (macromonomer)-swollen micelles by entered oligomeric radicals. 

While vinyl acetate is normally polymerized in batch or continuous stirred tank reactors, continuous reactors offer the possibility of better heat transfer and more uniform quality. Tubular reactors have been used to produce polystyrene by a mass process (1, 2), and to produce emulsion polymers from styrene and styrene-butadiene (3 -6). The use of mixed emulsifiers to produce mono-disperse latexes has been applied to polyvinyl toluene (5). Dunn and Taylor have proposed that nucleation in seeded vinyl acetate emulsion is prevented by entrapment of oligomeric radicals by the seed particles (6j. Because of the solubility of vinyl acetate in water, Smith -Ewart kinetics (case 2) does not seem to apply, but the kinetic models developed by Ugelstad (7J and Friis (8 ) seem to be more appropriate. 

The synthesis of stable latexes requires suitable nucleation of primary particles and subsequent stabilization. In classical free-radical emulsion polymerization water-soluble initiators are used. Chain growth initially affords water-soluble oligomeric radicals, which can nucleate particles by collapsing upon themselves or by entering a surfactant micelle (cf. Section 7.1). Similar considerations appear reasonable for the aforementioned catalytic polymerization to stable latexes by the water-soluble complex 6a (Scheme 7.7) [65, 71]. As a different strategy, a very fine initial dispersion of a hydrophobic catalyst precursor can be achieved as a solution in a large number of toluene/hexadecane miniemulsion droplets (0 ca. 100 nm), dispersed in the continuous aqueous phase [77, 82]. 

Abstract. Polymerization in direct mini-emulsions is a relatively new polymerization technique which allows the preparation of submicron latex particles within the range 100large population of submicron monomer droplets in water (termed the mini-emulsion) by intensive shear force with the aid of an adequate emulsifier and coemulsifier (or hydrophobe). These stable, homogenized monomer droplets have an extremely large surface area and, therefore, can compete effectively with the monomer-swollen micelles, if present, for the oligomeric radicals gen-... 

The influence of the emulsifier (SHS) concentration on Np is more pronounced in the conventional emulsion polymerization system (Rp°c[SHS]y, y= 0.68) than in mini-emulsion polymerization (y=0.25). This result is caused by the different particle formation mechanism. While homogeneous nucleation is predominant in the conventional emulsion polymerization, monomer droplets become the main locus of particle nucleation in mini-emulsion polymerization. In the latter polymerization system, most of the emulsifier molecules are adsorbed on the monomer droplet surface and, consequently, a dense droplet surface structure forms. The probability of absorption of oligomeric radicals generated in the continuous phase by the emulsifier-saturated surface of minidroplets is low as is also the particle formation rate. 

---