Elements standard state

Ideal gas absolute entropies of many compounds may be found in Daubert et al.,"" Daubert and Danner," JANAF Thermochemical Tables,TRC Thermodynamic Tables,and Stull et al. ° Otherwise, the estimation method of Benson et al. " is reasonably accurate, with average errors of 1-2 J/mol K. Elemental standard-state absolute entropies may be found in Cox et al." Values from this source for some common elements are listed in Table 2-389. ASjoqs may also be calculated from Eq. (2-52) if values for AHjoqs and AGJoqs are known. 

Put in this manner, it is easy to imagine this as a two-step procedure. There is first an enthalpy cost to pull each atom out of its elemental standard state - always a non-negative quantity, since the elemental standard states are chosen to be the most stable forms. This... 

For a free energy of fonnation, the preferred standard state of the element should be the thennodynamically stable (lowest chemical potential) fonn of it e.g. at room temperature, graphite for carbon, the orthorhombic crystal for sulfiir. 

There are many compounds in existence which have a considerable positive enthalpy of formation. They are not made by direct union of the constituent elements in their standard states, but by some process in which the necessary energy is provided indirectly. Many known covalent hydrides (Chapter 5) are made by indirect methods (for example from other hydrides) or by supplying energy (in the form of heat or an electric discharge) to the direct reaction to dissociate the hydrogen molecules and also possibly vaporise the other element. Other known endothermic compounds include nitrogen oxide and ethyne (acetylene) all these compounds have considerable kinetic stability. 

A more useful quantity for comparison with experiment is the heat of formation, which is defined as the enthalpy change when one mole of a compound is formed from its constituent elements in their standard states. The heat of formation can thus be calculated by subtracting the heats of atomisation of the elements and the atomic ionisation energies from the total energy. Unfortunately, ab initio calculations that do not include electron correlation (which we will discuss in Chapter 3) provide uniformly poor estimates of heats of formation w ith errors in bond dissociation energies of 25-40 kcal/mol, even at the Hartree-Fock limit for diatomic molecules. 

First, we would like to ehange the reference state from the isolated nuelei and eleetions to the elements in their standard states, C(graphite) and H2(g) at 298 K. This leads to the energy of formation at 0 K AfEo, whieh is identieal to the enthalpy of formation AfHo at 0 K. The energy and enthalpy are identieal only at 0 K. Next we would like to know the enthalpy ehange on heating propene from 0 to 298 K so as to obtain the enthalpy of formation from the isolated nuelei and eleetions elements This we will eonvert to from the elements in their standard... 

Kij tire 10-5 Eormation of Gaseous Atoms from Elements in the Standard State. 

We now know the energy of the propene thermodynamic state (propene(g)) relative to the state 3 C(g) and 6 11(g) and the energy of the therrnodynarnie standard state of the elements relative to the same state 3 C(g) and 6 11(g)). which is opposite in sign to the summed energies of formation of 3 C(g) and (i IKg). The energy differenee between these thennodynamie states is... 

The values of fH° and Ay.G° that are given in the tables represent the change in the appropriate thermodynamic quantity when one mole of the substance in its standard state is formed, isothermally at the indicated temperature, from the elements, each in its appropriate standard reference state. The standard reference state at 25°C for each element has been chosen to be the standard state that is thermodynamically stable at 25°C and 1 atm pressure. The standard reference states are indicated in the tables by the fact that the values of fH° and Ay.G° are exactly zero. 

Since the elements are in their standard states, the enthalpy change for the reaction is equal to the standard enthalpy of COj less the standard enthalpies of C and Oj, which are zero in each instance. Thus,... 

National Institute of Standards and Technology (NIST). The NIST is the source of many of the standards used in chemical and physical analyses in the United States and throughout the world. The standards prepared and distributed by the NIST are used to caUbrate measurement systems and to provide a central basis for uniformity and accuracy of measurement. At present, over 1200 Standard Reference Materials (SRMs) are available and are described by the NIST (15). Included are many steels, nonferrous alloys, high purity metals, primary standards for use in volumetric analysis, microchemical standards, clinical laboratory standards, biological material certified for trace elements, environmental standards, trace element standards, ion-activity standards (for pH and ion-selective electrodes), freezing and melting point standards, colorimetry standards, optical standards, radioactivity standards, particle-size standards, and density standards. Certificates are issued with the standard reference materials showing values for the parameters that have been determined. 

AH and AG refer to the formation of the named substances in the specified states at 298.15 and 1300 K from their elements in the standard states of those elements at these temperatures. Refs. 9 and 15. 

The values given in the following table for the heats and free energies of formation of inorganic compounds are derived from a) Bichowsky and Rossini, Thermochemistry of the Chemical Substances, Reinhold, New York, 1936 (h) Latimer, Oxidation States of the Elements and Their Potentials in Aqueous Solution, Prentice-Hall, New York, 1938 (c) the tables of the American Petroleum Institute Research Project 44 at the National Bureau of Standards and (d) the tables of Selected Values of Chemical Thermodynamic Properties of the National Bureau of Standards. The reader is referred to the preceding books and tables for additional details as to methods of calculation, standard states, and so on. 

II The increment in the free energy, AF, in the reaction of forming the given substance in its standard state from its elements in their standard states. The standard states are for a gas, fugacity (approximately equal to the pressure) of 1 atm for a pure liquid or solid, the substance at a pressure of 1 atm for a substance in aqueous solution, the hyj)othetical solution of unit molahty, which has all the properties of the infinitely dilute solution except the property of concentration. 

Compiled from Daubert, T. E., R. R Danner, H. M. Sibiil, and C. C. Stebbins, DIPPR Data Compilation of Pure Compound Properties, Project 801 Sponsor Release, July, 1993, Design Institute for Physical Property Data, AlChE, New York, NY and from Thermodynamics Research Center, Selected Values of Properties of Hydrocarbons and Related Compounds, Thermodynamics Research Center Hydrocarbon Project, Texas A M University, College Station, Texas (extant 1994). The compounds are considered to be formed from the elements in their standard states at 298.15 K and 101,325 P. These include C (graphite) and S (rhombic). Enthalpy of combustion is the net value for the compound in its standard state at 298.15K and 101,325 Pa. 

Enthalpy of Formation The ideal gas standard enthalpy (heat) of formation (AHJoqs) of chemical compound is the increment of enthalpy associated with the reaction of forming that compound in the ideal gas state from the constituent elements in their standard states, defined as the existing phase at a temperature of 298.15 K and one atmosphere (101.3 kPa). Sources for data are Refs. 15, 23, 24, 104, 115, and 116. The most accurate, but again complicated, estimation method is that of Benson et al. " A compromise between complexity and accuracy is based on the additive atomic group-contribution scheme of Joback his original units of kcal/mol have been converted to kj/mol by the conversion 1 kcal/mol = 4.1868 kJ/moL... 

Entropy of Formation The ideal gas standard entropy of formation (AS°298) of a chemical compound is the increment of entropy associated with the reaction of forming that compound in the ideal gas state from the constituent elements in their standard state definea as the existing phase at a temperature of 298.15 K and one atmosphere (101.325 kPa). Thus ... 

TABLE 2-389 Standard-State Entropy of Elements at 298.15 K and 1 Atmosphere... 

If Gf is arbitrarily set equal to zero for all elements in their standard states, then for compounds Gf = AG°, the standard Gibbs-energy change of formation for species i. In addition, the fugacity is eliminated in favor of the fugacity coefficient by Eq. (4-79),/ = yi jP. With these substitutions, the equation for becomes... 

X The increment in beat content, AH, in the reaction of forming the ven substance from its elements in their standard states. When AH is negative, beat is evolved in the process, and, when positive, heat is absorbed. 

Table 16.8 —AH (298)/kJmol for MO from elements in standard states...

There are many ways to express the energy of a molecule. Most common to organic chemists is as a heat of formation, AHf. This is the heat of a hypothetical chemical reaction that creates a molecule from so-called standard states of each of its constituent elements. For example, AHf for methane would be the energy required to create CH4 from graphite and H2, the standard states of carbon and hydrogen, respectively. 

The standard heat of formation ( AH ) of a chemical compound is the standard heat of reaction corresponding to the chemical combination of its constituent elements to form one mole of the compound, each existing in its standard state at 1 atm and 25°C. It has units of cal/g-mole. 

The two elements have similar electronegativity. (Note electronegativity is the power of an element to attract electrons to itself when present in a molecule or in an aggregate of unlike atoms it is a different property from the electrode potential, which depends on the free energy difference between an element in its standard state and a compound or ion in solution (see Section 20.1).) In addition a metal of a lower valency tends to dissolve a metal of a higher valency more readily than vice versa. 

---