Electrolyte transition metal

Potassium removal is required because the presence of potassium during electrolysis reportedly promotes the formation of the a-Mn02 phase which is nonbattery active. Neutralization is continued to a pH of approximately 4.5, which results in the precipitation of additional trace elements and, along with the ore gangue, can be removed by filtration. Pinal purification of the electrolyte Hquor by the addition of sulfide salts results in the precipitation of all nonmanganese transition metals. 

Another application is in tire oxidation of vapour mixtures in a chemical vapour transport reaction, the attempt being to coat materials with a tlrin layer of solid electrolyte. For example, a gas phase mixture consisting of the iodides of zirconium and yttrium is oxidized to form a thin layer of ytnia-stabilized zirconia on the surface of an electrode such as one of the lanthanum-snontium doped transition metal perovskites Lai j.Srj.M03 7, which can transmit oxygen as ions and electrons from an isolated volume of oxygen gas. 

Lower oxidation states are rather sparsely represented for Zr and Hf. Even for Ti they are readily oxidized to +4 but they are undoubtedly well defined and, whatever arguments may be advanced against applying the description to Sc, there is no doubt that Ti is a transition metal . In aqueous solution Ti can be prepared by reduction of Ti, either with Zn and dilute acid or electrolytically, and it exists in dilute acids as the violet, octahedral [Ti(H20)6] + ion (p. 970). Although this is subject to a certain amount of hydrolysis, normal salts such as halides and sulfates can be separated. Zr and are known mainly as the trihalides or their derivatives and have no aqueous chemistry since they reduce water. Table 21.2 (p. 960) gives the oxidation states and stereochemistries found in the complexes of Ti, Zr and Hf along with illustrative examples. (See also pp. 1281-2.)... 

PEO is found to be an ideal solvent for alkali-metal, alkaline-earth metal, transition-metal, lanthanide, and rare-earth metal cations. Its solvating properties parallel those of water, since water and ethers have very similar donicites and polarizabilities. Unlike water, ethers are unable to solvate the anion, which consequently plays an important role in polyether polymer-electrolyte formation. 

The differential capacitance method cannot be used for reactive metals, such as transition metals in aqueous solutions, on which the formation of a surface oxide occurs over a wide potential re ion. An immersion method was thus developed by Jakuszewski et al. 3 With this technique the current transient during the first contact of a freshly prepared electrode surface with the electrolyte is measured for various immersion potentials. The electrode surface must be absolutely clean and discharged prior to immersion.182-18 A modification of this method has been described by Sokolowski et al. The values of obtained by this method have been found to be in reasonable agreement with those obtained by other methods, although for reactive metals this may not be a sufficient condition for reliability. 

Electropolymerization is also an attractive method for the preparation of modified electrodes. In this case it is necessary that the forming film is conductive or permeable for supporting electrolyte and substrates. Film formation of nonelectroactive polymers can proceed until diffusion of electroactive species to the electrode surface becomes negligible. Thus, a variety of nonconducting thin films have been obtained by electrochemical oxidation of aromatic phenols and amines Some of these polymers have ligand properties and can be made electroactive by subsequent inincorporation of transition metal ions... 

In this method " - the melt eontains boric oxide and the metal oxide in a suitable electrolyte, usually an alkali or alkaline-earth halide or fluoroborate. The cell is operated at 700-1000 C depending on electrolyte composition. To limit corrosion, the container serving as cathode is made of mild steel or of the metal whose boride is sought. The anode is graphite or Fe. Numerous borides are prepared in this way, e.g., alkaline-earth and rare-earth hexaborides " and transition-metal borides, e.g, TiBj NijB, NiB and TaB... 

A series of Be-Pt intermetallic compounds arc prepared during the electrodeposition of Be on Pt from a solution of BeCl2 in an equimol NaCl-KCl mixture at 710°C. X-Ray diffraction of the electrode surface shows the presence of BePt, BcjPt. Electrolytic methods are also used to extract single crystals of Be,V from alloys prepared by arc melting Be and the transition metal in the proportion 15 1. 

We have already referred to the Mo/Ru/S Chevrel phases and related catalysts which have long been under investigation for their oxygen reduction properties. Reeve et al. [19] evaluated the methanol tolerance, along with oxygen reduction activity, of a range of transition metal sulfide electrocatalysts, in a liquid-feed solid-polymer-electrolyte DMFC. The catalysts were prepared in high surface area by direct synthesis onto various surface-functionalized carbon blacks. The intrinsic... 

Experimental data show that at the usual concentrations (10 to lOM), most salts and also the hydroxides of alkali metals are strong electrolytes. This is true also for some inorganic acids HCl, HCIO4, and others. Weak electrolytes are the organic acids and the hydroxides of metals other than alkah. Few electrolytes of the intermediate type (with moderate values of a) exist in particular, certain transition-metal halides such as ZnClj, Znl2, and CdCl2 are in this category. 

In supercapacitors, apart from the electrostatic attraction of ions in the electrode/electrolyte interface, which is strongly affected by the electrochemically available surface area, pseudocapacitance effects connected with faradaic reactions take place. Pseudocapacitance may be realized through carbon modification by conducting polymers [4-7], transition metal oxides [8-10] and special doping via the presence of heteroatoms, e.g. oxygen and/or nitrogen [11, 12]. 

In the fifth paper of this chapter on cathodes, an investigation of thin-film oxide-hydroxide electrodes containing Cr, Ni, and Co compounds was authored by N. Vlasenko et al. The thin-films were produced by electrochemical deposition from transition metal aqueous fluorine-containing electrolytes onto steel substrates. These thin-films were tested in Li coin cells. Electrochemical activity appears to scale with the amount of fluoride used in the deposition the larger concentration of fluoride in the bath, the greater the capacity. One Ni oxide-hydroxide film electrode showed greater than 175 mAh/g reversible capacity on the 50th cycle with excellent coulombic efficiency. 

Recently, there has been considerable interest in developing molten salts that are less air and moisture sensitive. Melts such as l-methyl-3-butylimidazolium hexa-fluorophosphate [211], l-ethyl-3-methylimidazolium trifluoromethanesulfonate [212], and l-ethyl-3-methylimidazolium tetrafluoroborate [213] are reported to be hydro-phobic and stable under environmental conditions. In some cases, metal deposition from these electrolytes has been explored [214]. They possess a wide potential window and sufficient ionic conductivity to be considered for many electrochemical applications. Of course if one wishes to take advantage of their potential air stability, one loses the opportunity to work with the alkali and reactive metals. Further, since these ionic liquids are neutral and lack the adjustable Lewis acidity common to the chloroaluminates, the solubility of transition metal salts into these electrolytes may be limited. On a positive note, these electrolytes are significantly different from the chloroaluminates in that the supporting electrolyte is not intended to be electroactive. 

---