Electrodes material characteristics

Electromagnetic flow meters ate avadable with various liner and electrode materials. Liner and electrode selection is governed by the corrosion characteristics of the Hquid. Eor corrosive chemicals, fluoropolymer or ceramic liners and noble metal electrodes are commonly used polyurethane or mbber and stainless steel electrodes are often used for abrasive slurries. Some fluids tend to form an insulating coating on the electrodes introducing errors or loss of signal. To overcome this problem, specially shaped electrodes are avadable that extend into the flow stream and tend to self-clean. In another approach, the electrodes are periodically vibrated at ultrasonic frequencies. 

As mentioned above, the typical positive electrode material is LiCo02, and there are typically two types of negative electrode materials, such as coke and graphite. The characteristics of lithium-ion batteries constructed using these electrode materials are discussed below. 

The availability of high-intensity, tunable X-rays produced by synchrotron radiation has resulted in the development of new techniques to study both bulk and surface materials properties. XAS methods have been applied both in situ and ex situ to determine electronic and structural characteristics of electrodes and electrode materials [58, 59], XAS combined with electron-yield techniques can be used to distinguish between surface and bulk properties, In the latter procedure X-rays are used to produce high energy Auger electrons [60] which, because of their limited escape depth ( 150-200 A), can provide information regarding near surface composition. 

Perhaps the first practical application of carbonaceous materials in batteries was demonstrated in 1868 by Georges Le-clanche in cells that bear his name [20]. Coarsely ground MnO, was mixed with an equal volume of retort carbon to form the positive electrode. Carbonaceous powdered materials such as acetylene black and graphite are commonly used to enhance the conductivity of electrodes in alkaline batteries. The particle morphology plays a significant role, particularly when carbon blacks are used in batteries as an electrode additive to enhance the electronic conductivity. One of the most common carbon blacks which is used as an additive to enhance the electronic conductivity of electrodes that contain metal oxides is acetylene black. A detailed discussion on the desirable properties of acetylene black in Leclanche cells is provided by Bregazzi [21], A suitable carbon for this application should have characteristics that include (i) low resistivity in the presence of the electrolyte and active electrode material, (ii) absorption and retention of a significant... 

High porosity carbons ranging from typically microporous solids of narrow pore size distribution to materials with over 30% of mesopore contribution were produced by the treatment of various polymeric-type (coal) and carbonaceous (mesophase, semi-cokes, commercial active carbon) precursors with an excess of KOH. The effects related to parent material nature, KOH/precursor ratio and reaction temperature and time on the porosity characteristics and surface chemistry is described. The results are discussed in terms of suitability of produced carbons as an electrode material in electric double-layer capacitors. 

Jellium is a good model for sp metals. This group of metals comprises, amongst others, the elements Hg, Cd, Zn, Tl, In, Ga and Pb, all of which are important as electrode materials in aqueous solutions. They possess wide conduction bands with delocalized electrons, which form a quasi-free-electron gas. The jellium model cannot be applied to transition metals, which have narrow d bands with a localized character. The sd metals Cu, Ag and Au are borderline cases. Cu and Ag have been successfully treated by a modified version of jellium [3], because their d orbitals are sufficiently low in energy. This is not possible for gold, whose characteristic color is caused by a d band near the Fermi level. 

Carbon nanotubes (CNTs) have been tested as electrode materials by many groups as early as the 1990s for electrochemical energy storage [4,5,6]. CNTs possess the following characteristics that could be of essential importance for electrochemical energy storage ... 

Carbon blacks are promising electrode materials due to their relatively high activities and long lifetimes in contrast to the lower activity or rapid deactivation of the other carbonaceous materials [16-20]. These catalytic characteristics of carbon blacks are attributed to their microstructure that has many active sites consisting of edges and defects in nanosized graphitic layers [19-21]. 

It, thus, follows that the electrode potential in electron transfer equilibriiun represents the redox electron level of the redox particles in aqueous electrolyte solution. Further, it follows from Eqn. 4-19 that the electrode potential in the transfer equilibrium of redox electrons is characteristic of individual redox reactions but independent of the nature of the electrode materials. 

The electrode material for electrofluo-rination processes is important, and new materials with high conductivity but chemically inert surface characteristics are desirable. Materials such as Ni, Monel, or HastaUoy are commonly employed [46] and the use of Pt has been pioneered by Schmidt [47]. Boron-doped diamond is a novel electrode material with a chemically highly inert surface suitable for... 

---