Electrochemical Conducting Polymers

Functionalized conducting monomers can be deposited on electrode surfaces aiming for covalent attachment or entrapment of sensor components. Electrically conductive polymers (qv), eg, polypyrrole, polyaniline [25233-30-17, and polythiophene/23 2JJ-J4-j5y, can be formed at the anode by electrochemical polymerization. For integration of bioselective compounds or redox polymers into conductive polymers, functionalization of conductive polymer films, whether before or after polymerization, is essential. In Figure 7, a schematic representation of an amperomethc biosensor where the enzyme is covalendy bound to a functionalized conductive polymer, eg, P-amino (polypyrrole) or poly[A/-(4-aminophenyl)-2,2 -dithienyl]pyrrole, is shown. Entrapment of ferrocene-modified GOD within polypyrrole is shown in Figure 7. 

The development of polythiophenes since the early 1980s has been extensive. Processible conducting polymers are available and monomer derivathation has extended the range of electronic and electrochemical properties associated with such materials. Problem areas include the need for improved conductivity by monomer manipulation, involving more extensive research using stmcture—activity relationships, and improved synthetic methods for monomers and polymers alike, which are needed to bring the attractive properties of polythiophenes to fmition on the commercial scale. 

Electrochemical polymeriza tion of heterocycles is useful in the preparation of conducting composite materials. One technique employed involves the electro-polymerization of pyrrole into a swollen polymer previously deposited on the electrode surface (148—153). This method allows variation of the physical properties of the material by control of the amount of conducting polymer incorporated into the matrix film. If the matrix polymer is an ionomer such as Nation (154—158) it contributes the dopant ion for the oxidized conducting polymer and acts as an effective medium for ion transport during electrochemical switching of the material. 

Conducting polymer composites have also been formed by co-electrodeposition of matrix polymer during electrochemical polymerization. Because both components of the composite are deposited simultaneously, a homogenous film is obtained. This technique has been utilized for both neutral thermoplastics such as poly(vinyl chloride) (159), as well as for a large variety of polyelectrolytes (64—68, 159—165). When the matrix polymer is a polyelectrolyte, it serves as the dopant species for the conducting polymer, so there is an intimate mixing of the polymer chains and the system can be appropriately termed a molecular composite. 

Electrogenerated conducting polymer films incorporate ions from the electrolyte medium for charge compensation (182). Electrochemical cycling in an electrolyte solution results in sequential doping and undoping of the polymer film. In the case of a -doped polymer, oxidation of the film results in the... 

The changes in the optical absorption spectra of conducting polymers can be monitored using optoelectrochemical techniques. The optical spectmm of a thin polymer film, mounted on a transparent electrode, such as indium tin oxide (ITO) coated glass, is recorded. The cell is fitted with a counter and reference electrode so that the potential at the polymer-coated electrode can be controlled electrochemically. The absorption spectmm is recorded as a function of electrode potential, and the evolution of the polymer s band stmcture can be observed as it changes from insulating to conducting (11). 

Entrapment of biochemically reactive molecules into conductive polymer substrates is being used to develop electrochemical biosensors (212). This has proven especially useful for the incorporation of enzymes that retain their specific chemical reactivity. Electropolymerization of pyrrole in an aqueous solution containing glucose oxidase (GO) leads to a polypyrrole in which the GO enzyme is co-deposited with the polymer. These polymer-entrapped GO electrodes have been used as glucose sensors. A direct relationship is seen between the electrode response and the glucose concentration in the solution which was analyzed with a typical measurement taking between 20 to 40 s. 

Here we introduce a personal point of view about the interactions between conducting polymers and electrochemistry their synthesis, electrochemical properties, and electrochemical applications. Conducting polymers are new materials that were developed in the late 1970s as intrinsically electronic conductors at the molecular level. Ideal monodimensional chains of poly acetylene, polypyrrole, polythiophene, etc. can be seen in Fig. 1. One of the most fascinating aspects of these polymeric... 

Most of the usual conducting polymers have a cross-linked stmcture (Fig. 3), but again they can be electrochemically oxidized and reduced. The electrochemical responses must follow electrochemical models and... 

The presence of polymer, solvent, and ionic components in conducting polymers reminds one of the composition of the materials chosen by nature to produce muscles, neurons, and skin in living creatures. We will describe here some devices ready for commercial applications, such as artificial muscles, smart windows, or smart membranes other industrial products such as polymeric batteries or smart mirrors and processes and devices under development, such as biocompatible nervous system interfaces, smart membranes, and electron-ion transducers, all of them based on the electrochemical behavior of electrodes that are three dimensional at the molecular level. During the discussion we will emphasize the analogies between these electrochemical systems and analogous biological systems. Our aim is to introduce an electrochemistry for conducting polymers, and by extension, for any electrodic process where the structure of the electrode is taken into account. 

An important point related to conducting polymers is the interest that physicists have shown in their properties and applications. Although the same materials are used by electrochemists, there is a great difference that is related to the field of interest. Physicists always use conducting polymers as dry materials while most of the electrochemical interest is centered on soft and wet materials. This is an important difference because those two states of the same material follow quite different physical laws. 

We hope to show here that the electrochemical properties and applications of conducting polymers considered as dry materials represent poor and limiting electrochemical properties for those materials considered as three-dimensional structures. 

Both initiation and polymerization kinetics obtained from Tafel slopes (Fig. 5) are related to the formation of very thin films, which are not useful for most applications of conducting polymers. A similar restriction can be attributed to the combination of electrochemical and gravimet-... 

Empirical kinetics are useful if they allow us to develop chemical models of interfacial reactions from which we can design experimental conditions of synthesis to obtain thick films of conducting polymers having properties tailored for specific applications. Even when those properties are electrochemical, the coated electrode has to be extracted from the solution of synthesis, rinsed, and then immersed in a new solution in which the electrochemical properties are studied. So only the polymer attached to the electrode after it is rinsed is useful for applications. Only this polymer has to be considered as the final product of the electrochemical reaction of synthesis from the point of view of polymeric applications. 

III. ELECTROCHEMICAL VERSUS CHEMICAL PRODUCTION OF CONDUCTING POLYMERS... 

As electrochemists, our interest is attracted by the electrochemical properties of materials based on conducting polymers. The study of these properties requires putting a dry material inside an electrolyte. Since most of the electrolytes employed are based on a salt that is first dissolved in a solvent, we will refer to liquid electrolytes. At the end of this chapter we... 

The flow of a current through an electrochemical system demonstrates the main difference between material based on conducting polymers and all the other industrial nonconducting polymers conducting polymers oxidize and reduce electrochemically in a reverse way, as do metals or redox couples ... 

Later we will describe both oxidation and reduction processes that are in agreement with the electrochemically stimulated conformational relaxation (ESCR) model presented at the end of the chapter. In a neutral state, most of the conducting polymers are an amorphous cross-linked network (Fig. 3). The linear chains between cross-linking points have strong van der Waals intrachain and interchain interactions, giving a compact solid [Fig. 14(a)]. By oxidation of the neutral chains, electrons are extracted from the chains. At the polymer/solution interface, positive radical cations (polarons) accumulate along the polymeric chains. The same density of counter-ions accumulates on the solution side. 

This reverse electrochemical control of the gel composition and volume is the basis for the singular electrochemical properties and the concomitant applications of conducting polymers. Reactions and properties based on polypyrrole films can be summarized as shown in Table 5 and below ... 

---