Electrical portable

Electric portable tool housings computer and business machine parts. .. 

This electrical field potential is measured by means of portable millivoltmeter with high input resistance. The field registration is carried out in the mountain areas at the distance of 5 km and more, at the same time the minimal gradient value is about 10 mV/km. 

Ytterbium metal has possible use in improving the grain refinement, strength, and other mechanical properties of stainless steel. One isotope is reported to have been used as a radiation source substitute for a portable X-ray machine where electricity is unavailable. Few other uses have been found. 

Potential fusion appHcations other than electricity production have received some study. For example, radiation and high temperature heat from a fusion reactor could be used to produce hydrogen by the electrolysis or radiolysis of water, which could be employed in the synthesis of portable chemical fuels for transportation or industrial use. The transmutation of radioactive actinide wastes from fission reactors may also be feasible. This idea would utilize the neutrons from a fusion reactor to convert hazardous isotopes into more benign and easier-to-handle species. The practicaUty of these concepts requires further analysis. 

Portable fire extinguishers are classified according to appHcabiHty Class A for soHd combustibles Class B for flammable Hquids Class C for electrical fires that require a nonconducting agent and Class D for combustible metals. Water frequently is used for Class A extinguishers bicarbonates for Class B and Class BC carbon dioxide or Freon for Class C ammonium phosphate for Class ABC and powdered salt, sodium chloride, for Class D. 

Reciprocating compressors are available with a large variety of other drivers, which include the piston engine, steam turbine, or, in rare cases, a gas turbine. Next in popularity to the electric motor is the piston engine. The arrangement lends itself to skid mounting, particularly with the semi-portable units found in the oilfield. The unit is also popular as a lease unit, which may be lifted onto a flat bed trailer and moved from one location to another as needed. The engine is either direct-coupled or. as with smaller compressors, it may be belt-connected. 

For most of the rotary compressors in process service, the driver is an electric motor. Compressors in portable service, however, particularly the helical-lobe compressor, use internal combustion engines. Many of the rotary compressors require the high speed that can be obtained from a direct-connected motor. The dry type helical-lobe compressor is probably the main exception as the smaller units operate above motor speed and require a speed increasing gear which may be either internal or external (see Figure 4-1). The helical-lobe compressor is the most likely candidate for a driver other than the electric motor. Aside from the portables already mentioned, engines are used extensively as drivers for rotaries located in the field in gas-gathering service. Steam turbines, while not common, probably comprise most of process service alternate drive applications. 

Because of their rigidity they are being looked at particularly as replacements for metals such as die-cast zinc alloys. Early uses to become established include portable stereo cassette recorders. Other applications include mowing machine components, electrical plugs, sockets, TV tuner blocks, pulleys, shafts and gears. 

Area designation Zoning for electrics Control portable heaters etc. No smoking Restricted areas... 

In electrochemical cells sample oxidation produces an electric current proportional to the concentration of test substance. Sometimes interferences by other contaminants can be problematic and in general the method is poorer than IR. Portable and static instruments based on this method are available for specific chemicals, e.g. carbon monoxide, chlorine, hydrogen sulphide. 

These generators vaporize a liquid (oil/mineral oil or glycol and water), which then condenses into a fine aerosol on contact with cooler air. The amount of smoke produced should be controllable by the liquid feed rate and the temperature of the heating chamber, but in practice the output is not ea.sy to control. They will, however, produce a large amount of smoke over a long periled, dhe generators are relatively expensive (several hundred ECUs), are bulky, are not generally portable, and require an electrical connection. 

A portable source of electricity, if not a necessity, is certainly a great convenience in modem life and is dependent on compact, sealed, dry batteries. The main types are listed below and they incorporate the metals Zn, Ni, Hg and Cd as well as Mn02... 

Secondaiy batteries consist of a series of electrochemical cells. The most popular types are the lead-acid type used for starting, lighting, and electrical systems in motor vehicles and the small rechargeable batteries used in laptops, camcorders, digital phones, and portable electronic appliances. 

A battery stores electric energy. Although the concentration of energy is small compared, for example to gasoline, we see a myriad of uses of batteries in radios, cellular phones, flashlights, computers, watches, and so on. The public s demand for these portable products is ever increasing, and scientists strive to develop lighter and better batteries. 

Electrical Stability of Emuisions. The electrical stability test indicates the stability of emulsions of water in oil. The emulsion tester consists of a reliable circuit using a source of variable AC current (or DC current in portable units) connected to strip electrodes. The voltage imposed across the electrodes can be increased until a predetermined amount of current flows through the mud emulsion-breakdown point. Relative stability is indicated as the voltage at the breakdown point. 

Linear polarization instruments provide an instantaneous corrosion-rate data, by utilizing polarization phenomena. These instruments are commercially available as two-electrode Corrater and three electrode Pairmeter (Figure 4-472). The instruments are portable, with probes that can be utilized at several locations in the drilling fluid circulatory systems. In both Corrater and Pairmeter, the technique involves monitoring electrical potential of one of the electrodes with respect to one of the other electrodes as a small electrical current is applied. The amount of applied current necessary to change potential (no more than 10 to 20 mV) is proportional to corrosion intensity. The electronic meter converts the amount of current to read out a number that represents the corrosion rate in mpy. Before recording the data, sufficient time should be allowed for the electrodes to reach equilibrium with the environment. The corrosion-rate reading obtained by these instruments is due to corrosion of the probe element at that instant [184]. 

Natural gas must always be contained in appropriate pipes or vessels and precautions taken to ensure that leakage cannot occur. If a gas leak does occur, the main gas supply should be shut off, the area ventilated and the gas supplier informed. Electrical switches should not be turned on or off, portable electrical appliances including handheld torches should not be operated and all other possible sources of ignition removed or rendered inoperable and the affected area ventilated. In circumstances of excessive leakage, the building should be evacuated. 

The portable vibration analyzer incorporates a microprocessor that allows it to mathematically convert the electrical signal to acceleration per unit time, perform a TFT, and store the data. It can be programmed to generate alarms and displays of the data. The data stored by the analyzer can be downloaded to a personal or a more powerful computer to perform more sophisticated analyses, data storage and retrieval, and report generation. 

Portable tools and equipment 63/1139 Confined spaces 63/1139 Electricity 63/1140... 

Portable electrical hand tools and equipment shall be properly grounded and wound to operate on llOV a.c. center tapped to earth supply, and shall only be connected to the system by permanent joints or proper connections. 

---