Dyeing textile fibers viscose

Camille and Henry Dreyfus developed the first commercial process to manufacture cellulose acetate in 1905 and commercialized the spinning of cellulose acetate fibers in 1924 in the United States. At that time, the only other human-made fiber was viscose rayon, which was still in its early stages of commercialization. The main textile fibers were natural fibers cotton, wool, silk, and flax. Cellulose triacetate textile fiber was commercialized later in the 1950s. The tremendous technical effort by the Dreyfus Brothers resulted in more than 300 patents describing such significant inventions as the dry-spinning process and disperse dyeing. 

Antlblaze 19. Antiblaze 19 (Mobil), a flame retardant for polyester fibers (134), is a nontoxic mixture of cycHc phosphonate esters. Antiblaze 19 is 100% active, whereas Antiblaze 19T is a 93% active, low viscosity formulation for textile use. Both are miscible with water and are compatible with wetting agents, thickeners, buffers, and most disperse dye formulations. Antiblaze 19 or 19T can be diffused into 100% polyester fabrics by the Thermosol process for disperse dyeing and printing. This requires heating at 170—220°C for 30—60 s. 

The process of textile print coloration can be divided into three steps. First, the colorant is appHed as pigment dispersion, dye dispersion, or dye solution from a vehicle caUed print paste or printing ink, containing in addition to the colorant such solutions or dispersions of chemicals as may be required by the colorant or textile substrate to improve and assist in dye solubUity, dispersion stabUity, pH, lubricity, hygroscopicity, rate of dye fixation to the substrate, and colorant-fiber bonding. The required viscosity characteristics of a print paste are achieved by addition of natural or synthetic thickening agents or by use of emulsions. 

P.R.170 is not always heat stable enough to allow application in polyolefins. In HDPE systems formulated at 1/3 SD, the pigment tolerates exposure to 220 to 240°C for one minute. Its tinctorial strength, on the other hand, is excellent. P.R.170 is also occasionally used in polypropylene and polyacrylonitrile spin dyeing in the latter medium, it satisfies the specifications of the clothing and home textiles industries. Besides, P.R.170 lends color to viscose rayon and viscose cellulose it is used for the mass coloration of semisynthetic fibers made of cellulose last but not least, it colors yarns, fibers, and films made of secondary acetate. 

Wool-Cellulasic Fibers. One of (he oldest fiber blends in (he textile market is (he combination of wool and cotton or wool and viscose. In a one-bath process, selected direct and acid dyes are applied at pH 4.5-5.0 at 98 ItXfC. A phenolsulfonie acid condensation prodact is added as a reserving agent, to prevent the direct dyes from dyeing the wool under acid conditions, if optimum wetfastness properties are required, fiber-reactive dyes can be applied to both fibers by use of a two-bath process. 

---