Dimethyl sulfoxide in synthesis

Dimethyl sulfate, reaction with di-methylformamide, 47, 52 Dimethyl sulfoxide, in synthesis of phenyl f-butyl ether, 45, 89 potassium salt, preparation, 48, 109, 110... 

Dimethyl sulfoxide in synthesis of phenyl i-butyl ether, 46, 89 10,10-Dinitrocamphan-2-ol, 46, 56... 

Another remarkable synthesis of 2,4-dicarboxythiophenes in high yield involves a unique dimethylsulfonium butadiene (34), which could be cyclized to 2,4-dimethoxycar-bonylthiophene (35) in 91% yield by standing overnight in thionyl chloride (66CB1558). The crystalline salt (34) was obtained in satisfactory yields by refluxing two equivalents of methyl propynoate with one equivalent of dimethyl sulfoxide in ethanol. 

SYNTHESIS To a solution of 64.8 g of o-cresol and 56 g dimethyl sulfoxide in 300 mL EtjO, cooled with an external ice bath with vigorous stirring, there was added 40 mL chlorosulfonic acid dropwise over the course of 30 min. The cooling bath was removed, and the two phase mixture was mechanically stirred at room temperature for 12 h. The Et20 phase was then discarded, and the deep red residue that remained was thoroughly triturated under 300 mL IP A, producing a suspension of pale pink... 

RCO , an indifferent nucleophile in prohc solvents, enjoys a large rate enhancement, permitting rapid alkylation with haloalkanes in hexamethylphosphoric triamide [301, 302], When the Williamson ether synthesis is carried out in dimethyl sulfoxide [303], the yields are raised and the reaction time shortened. Displacements on unreactive haloarenes become possible [304] (conversion of bromobenzene to tert-butoxybenzene with tert-C UgO in dimethyl sulfoxide in 86% yield at room temperature). The fluoride ion, a notoriously poor nucleophile or base in protic solvents, reveals its hidden capabilities in dipolar non-HBD solvents and is a powerful nucleophile in substitution reactions on carbon [305],... 

Sharma, A. K., Swern, D. Trifluoroacetic anhydride. New activating agent for dimethyl sulfoxide in the synthesis of iminosulfuranes. 

Phenylacetonitrile added to a suspension of Na-tert-butoxide in dimethyl sulfoxide as polar aprotic solvent, phenyl isothiocyanate added dropwise below 25°, and stirred 1 hr. at 20° phenylcyanothioacetanilide. Y 81%. F. e. s. M. Pesson, S. Geiger, and Y. Person, C. r. 266 (C), 1555 (1968) dimethyl sulfoxide in organic synthesis, review, s. T. Durst, Adv. Org. Chem. 6, 285 (1969). 

Reactions with sodium hydride in dimethyl sulfoxide Wittig synthesis Ethylene derivatives... 

The formation of the above anions ("enolate type) depend on equilibria between the carbon compounds, the base, and the solvent. To ensure a substantial concentration of the anionic synthons in solution the pA" of both the conjugated acid of the base and of the solvent must be higher than the pAT -value of the carbon compound. Alkali hydroxides in water (p/T, 16), alkoxides in the corresponding alcohols (pAT, 20), sodium amide in liquid ammonia (pATj 35), dimsyl sodium in dimethyl sulfoxide (pAT, = 35), sodium hydride, lithium amides, or lithium alkyls in ether or hydrocarbon solvents (pAT, > 40) are common combinations used in synthesis. Sometimes the bases (e.g. methoxides, amides, lithium alkyls) react as nucleophiles, in other words they do not abstract a proton, but their anion undergoes addition and substitution reactions with the carbon compound. If such is the case, sterically hindered bases are employed. A few examples are given below (H.O. House, 1972 I. Kuwajima, 1976). 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Fig. 10. Synthesis of moxalactam (48) from 6-amiaopeniciUanic acid (6-APA) where R is CH(CgH )2, DMSO is dimethyl sulfoxide and DBN is l,5-dia2abicyclo[4.3.0]non-5-ene. The overall yield of (63) is 26% from 6-APA in the 13 steps shown.

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

This procedure, which involves the addition of an anion derived from a nitrile to an unactivated acetylenic bond under rather mild conditions, is a convenient general method for the synthesis of a-vinyl-nitriles (see Table I). The reaction proceeds smoothly in either dimethyl sulfoxide or hexamethylphosphoric triamide (see p. 103 for warning) as solvent with a tetraalkylam monium salt as catalyst. The products thus prepared are obtained in yields higher2 than those obtained under conventional conditions, which generally require higher temperatures and elevated pressures.3-4... 

The SnAt reactions were first successfully used in the synthesis of high-molecular-weight poly(arylene etherjs by Johnson et al.4,5 This reaction represents a good example for poly(ether sulfonejs in general, either in laboratory -or industrial-scale preparations. In this procedure, the bisphenol A and sodium hydroxide with an exact mole ratio of 1 2 were dissolved into dimethyl sulfoxide (DMSO)-chlorobenzene. The bisphenol A was converted into disodium bisphenolate A, and water was removed by azeotropic distillation. After the formation of the anhydrous disodium bisphenolate A, an equal molar amount of 4,4,-dichlorodiphenyl sulfone (DCDPS) was added in chlorobenzene under anhydrous conditions and the temperature was increased to 160°C for over 1 h... 

Hydroxy-L-prolin is converted into a 2-methoxypyrrolidine. This can be used as a valuable chiral building block to prepare optically active 2-substituted pyrrolidines (2-allyl, 2-cyano, 2-phosphono) with different nucleophiles and employing TiQ as Lewis acid (Eq. 21) [286]. Using these latent A -acylimmonium cations (Eq. 22) [287] (Table 9, No. 31), 2-(pyrimidin-l-yl)-2-amino acids [288], and 5-fluorouracil derivatives [289] have been prepared. For the synthesis of p-lactams a 4-acetoxyazetidinone, prepared by non-Kolbe electrolysis of the corresponding 4-carboxy derivative (Eq. 23) [290], proved to be a valuable intermediate. 0-Benzoylated a-hydroxyacetic acids are decarboxylated in methanol to mixed acylals [291]. By reaction of the intermediate cation, with the carboxylic acid used as precursor, esters are obtained in acetonitrile (Eq. 24) [292] and surprisingly also in methanol as solvent (Table 9, No. 32). Hydroxy compounds are formed by decarboxylation in water or in dimethyl sulfoxide (Table 9, Nos. 34, 35). 

The synthesis of new thieno-annelated 6aA4-thia-l,6-diazapentalenes 33 from iro-thiazolium-5-methyl and 5-methylene groups with dicyclohexyl amines in methanol or dimethyl sulfoxide has been achieved (Scheme 82) <1996MOL142>. 

---