Design generator

The process requires water vapor removal from the generator to be balanced with the water introduced with the chloric acid feed. Significantly greater chlorine dioxide generator capacity is achievable than using the older design generators. 

De novo design generation of proteins Tissue selections... 

Zemroch, P. J. (1986) Cluster analysis as an experimental design generator, with application to gasoline blending experiments. Technometrics 28, 39-49. 

Rapid prototyping (or stereolithography or 3D object curing) is a photochemical process used to produce solid 3D objects such as models, masters or patterns of any shape, directly from a design generated on a computer. The computer is used to control the illumination system that builds up the object, usually by a rapid polymerization process. An important part of the design is that the object is sectioned... 

Table 2.4 Matrix design of a 2 fractional design. Generator C=AB.

The overall characteristics of a design generated from an orthogonal matrix are defined by how factors and interactions are assigned to the different columns of the matrix. Certainly, different assignations lead to different experimental designs, but in any case a main effect should be confounded with other main effects. 

Although the designs generated by these techniques (except for multiple levels) are not orthogonal, they require fewer experiments that the orthogonal designs. 

Today, high quality, well-designed generating equipment is available for this niche market, which can safely yield high conversion efficiencies ( 95% CIO2) from the generation reaction (e.g., Rio Linda equipment from Vulcan Chemical Technologies, Inc.). 

The CAD design generated the geometry by performing Boolean operations on simple volumic primitives [2], The microstructure was realized by microstereolithography. This technique is based on a layer-by-layer light-induced polymerization of a liquid resin, a pre-polymerized solution. Actually, about 1800 layers of 5 pm thickness were superimposed in this way (5 h manufacturing time). 

Young, S. S., Ekins, S., and Lambert, C. G. (2002). So many targets, so many compounds, but so few resources. Current Drug Discovery, 1-6 (www.currentdrugdiscovery.com). Zemroch, P. J. (1986). Cluster analysis as an experimental design generator. Technometrics, 28, 39 19. 

Eriksson, L., Johansson, E., and Wikstrom, C. (1998), Mixture design—Design generation, PLS analysis, and model usage, Chemometr. Intell. Lab. Syst., 43,1-24. 

Goyal, V. and lerapetritou, M. G. (2005). Multi-objective framework for modular design generation incorporating demand uncertainty, Ind. Eng. Chem. Res., 44, pp. 3594-3606. 

Mutual solubility of two polymers is promoted when the solvent favors the polymer that is most difficult to dissolve. This is usually the one with the higher molecular weight. It is clear that selection of the optimum solvent for this process of designed generation of an interface is aided by systematic use of cohesion energy parameters. 

---