Definitions technical

At the beginning, the book includes definitions, technical overview and economic evaluation of conventional fossil fuel and Renewable Energy-based autonomous power systems, which are currently in operation all over the world. The most common autonomous power systems configurations are being described and all technical, financial and environmental problems associated with such systems are also presented. 

Baumeister, M., Marquardt, W. The chemical engineering data model VeDa. Part 1 VDDL - the language definition. Technical Report LPT-1998-01, RWTH Aachen University, Process Systems Engineering (1998)... 

According to James Trevelyan s definition, technical coordination means working with and influencing other people so they conscientiously perform some necessary work in accordance with a mutually agreed schedule (Trevelyan, 2007, p. 191). 

Knowlec e In this context, knowledge means facts, definitions, technical jargon, and so on. 

In addition to personnel, training, and procurement and supply responsibilities, the Gas Service, AEF, had definite technical responsibilities. In carrying out the latter responsibilities, General Fries headquarters worked closely with the War Department. 

ETSI Intelligent Transport Systems (ITS) Vehicular Communications Basic Set of Applications Definitions. Technical Report TR 102 638, vl.1.1, ETSI, 650 Route des Lucioles, F-06921 Sophia Antipolis Cedex, Prance (June 2009)... 

Over 1,000 pages long and with over 68,000 definitions, this cheap, compact and totally up-to-date book is ideal for today s needs. It includes many technical and colloquial terms, guides to pronunciation and common abbreviations. 

The basic condition of the Standard application - the availability of stable coupled probabilistic or the multiple probabilistic relations between then controlled quality indexes and magnetic characteristics of steel. All the probabilistic estimates, used in the Standard, are applied at confidence level not less than 0,95. General requirements to the means of control and procedure of its performance are also stipulated. Engineers of standard development endeavoured take into consideration the existed practice of technical control performance and test at the enterprises that is why the preparation of object control for the performance of nondestructive test can be done during the process of ordinary acceptance test. It is suggested that every enterprise is operated in correspondence with direct and non-destructive tests, obtained exactly at it, for detailed process chart and definite product type, however the tests have long since been performed after development of the Standard displayed that process gives way to unification. 

This standard proposal is limited to a format model. So, as it had been pointed out earlier, the implementation of this format requires some complementary work, which can partly be standardized. The definition of the Application Programming Interfaces (A.P.l.) could become a standard in the future. Nonetheless, this would require the creation of a new ad hoc group, with different technical competences. 

A standard is a document, definition, or reference artifact intended for general use by as large a body as possible a specification, which involves similar technical content and similar format, usually is limited in both its intended appHcabiUty and its users. 

Disciplined Approach to Problem Definition Specific technical objectives Quality function deployment or similar process Acquisition of background, literature, etc Networked to many technology resources Scientific Method... 

The Superfund Amendments and Reauthorization Act of 1986 reauthorized CERCLA to continue cleanup activities around the country. Several site-specific amendments, definitions, clarifications, and technical requirements were added to the legislation, including additional enforcement authorities. Title HI of SARA also authorized the Emergency Planning and Community Right-to-Know Act (EPCRA). 

Technical calculations dealing with humid air are reasonable to solve with dry air mass flow rates, because these remain constant in spite of changes in the amount of water vapor in the air. For that reason a definition for enthalpy,... 

These are the characteristics which need to be specified and their achievement controlled, assured, improved, managed, and demonstrated. These are the characteristics which form the subject matter of the specified requirements referred to in ISO 9000. When the value of these characteristics is quantified or qualified they are termed quality requirements or requirements for quality. ISO 8402 1994 defines requirements for quality as an expression of the needs or their translation into a set of quantitatively or qualitatively stated requirements for the characteristics of an entity to enable its realization and examination. While rather verbose, this definition removes the confusion over quality requirements and technical requirements. (An additional definition is provided in Appendix A.) Technical requirements for a product or service are quality requirements. The requirements of ISO 9000 are quality system requirements. 

Before proceeding to some of the more technical aspects of toxicology and the general subject of dose-response, several important definitions used by the profession and appearing in the literature are provided below (in alphabetical order). 

The shortage of petroleum after World War I induced an intense search for a gasoline substitute in the form of alcohol. The trade press felt alcohol would definitely replace gasoline as a fuel at some point. The advantages ot alcohol cited in the technical press included greater power and elimination of knocking. 

From a practical viewpoint toughness is readily understood, but technically there tends to be no scientific method of measuring it. One definition of toughness is simply the energy required to break the plastic. This... 

The complexity of the problems associated with future food packaging can be seen from these examples. We have focused on only one factor in one segment of the food industry—the effect of change in solid waste disposal. The present uncertainties in technical and political aspects of the disposal problem prevent a definite decision as to whether packaging changes should be made. All the industry can do at present is prepare itself for a possible major shift that would have to be made in a short time. 

They point out that at the heart of technical simulation there must be unreality otherwise, there would not be need for simulation. The essence of the subject linder study may be represented by a model of it that serves a certain purpose, e.g., the use of a wind tunnel to simulate conditions to which an aircraft may be subjected. One uses the Monte Carlo method to study an artificial stochastic model of a physical or mathematical process, e.g., evaluating a definite integral by probability methods (using random numbers) using the graph of the function as an aid. 

---