Cyclohexanones enol ethers

Like enamines, dihalocarbenes add smoothly to enol ethers and in many cases it is possible to isolate the dihalocyclopropyl intermediates which are valuable synthons for chloroenones (cf. Section 4.7.3.7.1). The earliest example of the addition of a dihalocarbene to an enol ether was provided by Parham,6,79 who studied the addition of dichlorocaibene to dihydropyran (equation 22). An example which illustrates the synthetic potential of the process is the conversion of the cyclohexanone enol ether (6) to the dichlorocy-clopropane (7 equation 23).80 The latter served as a useful intermediate in a stereospecific synthesis of Prelog-Djerassi lactonic acid. 

Ring contractions are not frequent among the 5-alkoxytriazolines469,521 however, under pressure arylsulfonyl azides react with sterically congested silyl enol ethers to give clean one-carbon, ring-contracted products (Scheme 183).528 For example, cyclohexanone enol ethers give cyclopentanes in 62-87% yield. 

Thienolactam 205 was prepared from thioaroylketene 6, Ar-acctal 203, Hg(OAc)2, and cyclohexanone enol ether 204 in the presence of either tris(dimethylamino)(trimethylsilyl)sulfur difluoride (TASF), or TBAF, with a yield of 30% and 28%, respectively (Scheme 86 <2001J(P 1)2774>). 

Vicinally tri- or tetramethoxy compounds may also be cleaved anodically. Thus 1,1,2-trimethoxycyclohexane obtained on electrooxidation of cyclohexanone enol ether may be oxidized to the acetal ester, (CH30)2CH(CH2)4 COOCH3 [34]. 

Symmetrical labile ethers such as cycloalkenyl ethers (15) or mixed acetals (16) can also be prepared from the 3-hydroxyl group by acid-catalyzed exchange etherification or by acid-catalyzed addition to cyclohexanone methyl enol ether. 

The Simmons-Smith cyclopropanation method has also found application for the a-methylation of ketones via an intermediate cyclopropane. The starting ketone—e.g. cyclohexanone 9—is first converted into an enol ether 10. Cyclopropanation of 10 leads to an alkoxynorcarane 11, which on regioselective hydrolytic cleavage of the three-membered ring leads to the semiketal 12 as intermediate, and finally yields the a-methylated ketone 13 ... 

The Simmons-Smith reaction has been used as the basis of a method for the indirect a methylation of a ketone. The ketone (illustrated for cyclohexanone) is first converted to an enol ether, an enamine (16-12) or silyl enol ether (12-22) and cyclopropanation via the Simmons-Smith reaction is followed by hydrolysis to give a methylated ketone. A related procedure using diethylzinc and diiodomethane allows ketones to be chain extended by one carbon. In another variation, phenols can be ortho methylated in one laboratory step, by treatment with Et2Zn and... 

This procedure illustrates a new three-step reaction sequence for the one-carbon ring expansion of cyclic ketones to the homologous tt,/3-unsaturated ketones. The key step in the sequence is the iron(III) chloride-induced cleavage of the central bond of trimethyl-silyloxycyclopropanes which me obtained by cyclopropanation of trimethylsilyl enol ethers. The procedure for the preparation of 1-trimethylsilyloxycyclohexene from cyclohexanone described in Part A is that of House, Czuba, Gall, and Olmstead. ... 

Because the trimethylsilyl enol ether of cyclohexanone 107 a is considerably more bulky than the corresponding dimethylsilyl enolate 107b, only the latter reacts with the N-tosyhmine 108 in the presence of catalytic amounts of diisopropylamine in DMF/H2O at 78°C or at room temperature to give the Mannich type compounds 109 in high yields [39] (Scheme 3.4). 

P 55] Before synthesis, a micro-mixing tee chip micro reactor (Figure 4.85) (with two mixing tees and four reservoirs) was primed with anhydrous tetrahydrofuran (THF). A 40 gl volume of a 0.1 M solution of tetrabutylammonium fluoride trihydrate in anhydrous THF is filled into one reservoir of a micro-mixing tee chip reactor [15], 40 gl of a 0.1 M solution of 4-bromobenzaldehyde in anhydrous THF is added to a second reservoir, 40 gl of a 0.1 M solution of the silyl enol ether (masking the enolate of a carbonyl compound such as cyclohexanone) in anhydrous THF is added to a third reservoir and anhydrous TH F is filled into the fourth collection reservoir. Electrical fields of417,455,476 and 0 V cm are applied to transport the reaction species from the respective reservoirs. The reaction is carried out at room temperature. 

OS 74] ]R 4b] ]P 55] For the reaction of 4-bromobenzaldehyde with the silyl enol ether of cyclohexanone, only 1% conversion was achieved on applying protocol [P 55] [15]. Changing the set of electrical fields so that the concentration of tetrabutylammonium fluoride trihydrate was raised resulted in 100% conversion (417, 341, 333 and 0 V cm" ). 

Reinvestigating the reaction of cyclohexanone silyl enol ether 22 with DDQ, adducts were also observed [26]. At 25 °C, both C-C and C-0 adducts (75 and 76) were formed along with the dehydrogenation products 23 and 77. The ratio of... 

Nitration of ketones or enol ethers provides a useful method for the preparation of a-nitro ketones. Direct nitration of ketones with HN03 suffers from the formation of a variety of oxidative by-products. Alternatively, the conversion of ketones into their enolates, enol acetates, or enol ethers, followed by nitration with conventional nitrating agents such as acyl nitrates, gives a-nitro ketones (see Ref. 79, a 1980 review). The nitration of enol acetates of alkylated cyclohexanones with concentrated nitric acid in acetic anhydride at 15-22 °C leads to mixtures of cis- and rrans-substituted 2-nitrocyclohexanones in 75-92% yield. 4-Monoalkylated acetoxy-cyclohexanes give mainly m-compounds, and 3-monoalkylated ones yield fra/w-compounds (Eq. 2.40).80... 

The use of oxygen-containing dienophiles such as enol ethers, silyl enol ethers, or ketene acetals has received considerable attention. Yoshikoshi and coworkers have developed the simple addition of silyl enol ethers to nitroalkenes. Many Lewis acids are effective in promoting the reaction, and the products are converted into 1,4-dicarbonyl compounds after hydrolysis of the adducts (see Section 4.1.3 Michael addition).156 The trimethylsilyl enol ether of cyclohexanone reacts with nitrostyrenes in the presence of titanium dichloride diisopropoxide [Ti(Oi-Pr)2Cl2], as shown in Eq. 8.99.157 Endo approach (with respect to the carbocyclic ring) is favored in the presence of Ti(Oi-Pr)2Cl2. Titanium tetrachloride affords the nitronates nonselectively. 

Fig. 1 Charge-transfer absorption spectra of enol silyl ethers complexes with re-acceptors. (a) Spectral changes accompanying the incremental additions of cyclohexanone enol silyl ether [2] to chloranil in dichloromethane. Inset Benesi-Hildebrand plot, (b) Charge-transfer absorption spectra of chloranil complexes showing the red shift in the absorption maxima with decreasing IP of the enol silyl ethers, (c) Comparative charge-transfer spectra of EDA complexes of a-tetralone enol silyl ether [6] showing the red shift in the absorption maxima with increasing EAs of the acceptors tetracyanoben-zene (TCNB), 2,6-dichlorobenzoquinone (DCBQ), chloranil (CA), and tetracyanoqui-nodimethane (TCNQ). Reproduced with permission from Ref. 37.

DDQ ( red = 0.52 V). It is noteworthy that the strong medium effects (i.e., solvent polarity and added -Bu4N+PFproduct distribution (in Scheme 5) are observed both in thermal reaction with DDQ and photochemical reaction with chloranil. Moreover, the photochemical efficiencies for dehydro-silylation and oxidative addition in Scheme 5 are completely independent of the reaction media - as confirmed by the similar quantum yields (d> = 0.85 for the disappearance of cyclohexanone enol silyl ether) in nonpolar dichloromethane (with and without added salt) and in highly polar acetonitrile. Such observations strongly suggest the similarity of the reactive intermediates in thermal and photochemical transformation of the [ESE, quinone] complex despite changes in the reaction media. 

The scope of the acid-catalyzed formation of C-glycosyl compounds has been greatly expanded with the finding that enol ethers and ketene acetals can be used as the carbon source in electrophilic substitution reactions at the anomeric center.126 Treatment of 198 with the trimethylsilyl enol ether derived from cyclohexanone, in the presence of stannic chloride, led to 2-(2,3,5-tri-0-benzoyl-/J-D-ribofuranosyl)cyelohexanone (206), presumably by way of the inter-... 

Another approach to (R)-(-)-phoracantholide I (245) used a ring enlargement of cyclohexanone (255) which had been alkylated with chiral synthon 256 (Scheme 14) [206]. Thus, compound 257 was prepared in 35% yield on a 7-g scale by alkylation of cyclohexanone with chiral 256. Cyclization with Am-berlyst A-15 provided enol ether 258 that was directly submitted to ruthenium tetroxide oxidation to give oxolactone 259 in a 47% yield. Reduction of the latter with catecholborane via its tosylhydrazone afforded (R)-(-)-phoracan-tholide I (245) in 31% yield. 

Ketone and ester enolates have historically proven problematic as nucleophiles for the transition metal-catalyzed allylic alkylation reaction, which can be attributed, at least in part, to their less stabilized and more basic nature. In Hght of these limitations, Tsuji demonstrated the first rhodium-catalyzed allylic alkylation reaction using the trimethly-silyl enol ether derived from cyclohexanone, albeit in modest yield (Eq. 4) [9]. Matsuda and co-workers also examined rhodium-catalyzed allylic alkylation, using trimethylsilyl enol ethers with a wide range of aUyhc carbonates [22]. However, this study was problematic as exemplified by the poor regio- and diastereocontrol, which clearly delineates the limitations in terms of the synthetic utihty of this particular reaction. 

Several examples of Bi(OTf)3-catalyzed Mannich-type reactions with various silyl enol ethers are summarized in Table 12. Silyl enol ethers derived from aromatic and aliphatic ketones were reacted with an equimolar mixture of aldehyde and aniline (Scheme 10). The corresponding (3-amino ketones 27 were obtained in good yields (Table 12, entries 1M-) from aromatic-derived silyl enol ethers, except for the more hindered isobutyrophenone derivative. Silyl enol ethers derived from cyclopentanone or cyclohexanone afforded the (3-amino ketones in good yields (Table 12, entries 5 and 6). 

Sensitized photo-oxidation of substituted cyclohexanone silyl enol ethers yields substituted cyclohex-2-enones." For example, menthone may yield (8 X=H) or (15) depending upon the direction of enolization " the corresponding hydroxy-... 

Substituted cyclohexanones, bearing a methyl, isopropyl, tert-butyl or phenyl group, give, on deprotonation with various chiral lithium amides in the presence of chlorotrimethylsilane (internal quench), the corresponding chiral enol ethers with moderate to apparently high enantioselec-tivity and in good yield (see Table 2)13,14,24> 29 36,37,55. Similar enantioselectivities are obtained with the external quench " technique when deprotonation is carried out in the presence of added lithium chloride (see Table 2, entries 5, 10, and 30)593. 

The feasibility of a deprotonation of cyclohexanone derivatives bearing a chiral heterocyclic substituent in the 4-position with the C2-symmetric base lithium bis[(/f)-l-phenylethyl]amide with internal quenching of the lithium enolate formed with chlorotrimethylsilane is shown in entries 32 and 33 of Table 229,25a. The silyl enol ethers are obtained in a diastereomeric ratio of 79.5 20.5. By using lithium bis[(1S)-l-phenylethyl]amide the two diastereomers are formed in a ratio of 20 80 indicating that the influence of the chirality of the substituent is negligible. 

Enantioselective deprotonation can also be successfully extended to 4,4-disubstituted cyclohexanones. 4-Methyl-4-phenylcyclohexanone (3) gives, upon reaction with various chiral lithium amides in THF under internal quenching with chlorotrimethylsilane, the silyl enol ether 4 having a quaternary stereogenic carbon atom. Not surprisingly, enantioselectivities are lower than in the case of 4-tm-butylcyclohexanone. Oxidation of 4 with palladium acetate furnishes the a./i-unsaturated ketone 5 whose ee value can be determined by HPLC using the chiral column Chiralcel OJ (Diacel Chemical Industries, Ltd.)59c... 

Asymmetric deprotonation of monocyclic cycloalkanones is not restricted to cyclohexanones. Thus, deprotonation of 3-phenylcyclobutanone with lithium bis[(S)-l-phenylethyl]amide in THF at — 100 °C in the presence of chlorotriethylsilane affords (—)-(/ )-3-pheny 1-1 -(triethylsi-lyloxy)-l-cyclobutene with 92% ee in 70% yield59d. Interestingly, with lithium (/ )-2,2-dimethyl-A-[( / )-2-(4-methyl-l-piperazinyl)-l-phenylethyl]propylamidc in THF/HMPA an ee value of only 47 % for the enol ether is recorded. 

The copper-catalyzed conjugate addition of methyl magnesium iodide to cyclohexenone and trapping the enolate as its trimethylsilyl enol ether, followed by a trityl hexachloro-antinomate-catalyzed Mukaiyama reaction, is apphed to / -(—jcarvone. C-2, C-3 functionalized chiral cyclohexanones are converted into their a-cyano ketones, which are submitted to Robinson annulation with methyl vinyl ketone. Highly functionalized chiral decalones are obtained that can be used as starting compounds in the total synthesis of enantiomerically pure clerodanes (equation 70). 

Intramolecular alkylation, although it is enticing, has not been developed as a method for cyclohexanone construction. Joseph P.A. Harrity of the University of Sheffield reports (J. Org. Chem. 68 4392, 2003) that TiCl smoothly transforms the enol ether 10, prepared from the corresponding alkynyl phosphonium salt, into the 2-aryl cyclohexanone 11. Alkynyl ethers such as 10 are readily prepared in enantiomerically-enriched form. Would the enantiomeric excess be maintained on cyclization ... 

---