Cycloaddition reactions dienophile

The alkene that adds to the diene is called the dienophile Because the Diels-Alder reaction leads to the formation of a ring it is termed a cycloaddition reaction The prod uct contains a cyclohexene ring as a structural unit... 

Cycloaddition Reactions. Methacrylates have been widely used as dienophiles in Diels-Alder reactions (22—24). 

A large number of pyridazines are synthetically available from [44-2] cycloaddition reactions. In one general method, azo or diazo compounds are used as dienophiles, and a second approach is based on the reaction between 1,2,4,5-tetrazines and various unsaturated compounds. The most useful azo dienophile is a dialkyl azodicarboxylate which reacts with appropriate dienes to give reduced pyridazines and cinnolines (Scheme 89). With highly substituted dienes the normal cycloaddition reaction is prevented, and, if the ethylenic group in styrenes is substituted with aryl groups, indoles are formed preferentially. The cycloadduct with 2,3-pentadienal acetal is a tetrahydropyridazine derivative which has been used for the preparation of 2,5-diamino-2,5-dideoxyribose (80LA1307). 

More recently, Cheeseman and coworkers have investigated cycloaddition reactions of 2,6-dioxypyrazines (80jCS(Pl)1603). 2,6-Dihydroxy-3,5-diphenylpyrazine (77) reacts with electron deficient dienophiles such as iV-phenylmaleimide, diethyl maleate and diethyl fumarate (Scheme 26) to yield adducts of the 3,8-diazabicyclo[3.2.1]octane class such as (78). This reaction is believed to proceed by way of the betaine (79) and has precedent (69AG(E)604) in that photolysis of the bicyclic aziridine (80) generates analogous betaines which have been trapped in cycloaddition reactions. 

Thiophene fails to undergo cycloaddition reactions with common dienophiles under normal conditions. However, when thiophene is heated under pressure with maleic anhydride, the exo adduct (136) is formed in moderate yield (78JOC1471). 

Aminomethylindoles are particularly important synthetic intermediates. 3-Dimethyl-aminomethylindole (gramine) (153) and especially its quaternary salts readily undergo displacement reactions with nucleophiles (Scheme 60). Indole-2,3-quinodimethanes, generated from 2-methylgramine as shown in Scheme 61, undergo intermolecular cycloaddition reactions with dienophiles to yield carbazole derivatives (82T2745). 

Extrapolation from the known reactivity of cyclobutadiene would suggest that azetes should be highly reactive towards dimerization and as dienes and dienophiles in cycloaddition reactions and the presence of a polar C=N should impart additional reactivity towards attack by nucleophiles. Isolation of formal dimers of azetes has been claimed as evidence for the intermediacy of such species, but no clear reports of their interception in inter-molecular cycloaddition reactions or by nucleophiles have yet appeared. 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

How do orbital symmetry requirements relate to [4tc - - 2tc] and other cycloaddition reactions Let us constmct a correlation diagram for the addition of butadiene and ethylene to give cyclohexene. For concerted addition to occur, the diene must adopt an s-cis conformation. Because the electrons that are involved are the n electrons in both the diene and dienophile, it is expected that the reaction must occur via a face-to-face rather than edge-to-edge orientation. When this orientation of the reacting complex and transition state is adopted, it can be seen that a plane of symmetry perpendicular to the planes of the... 

Perfluoroalkyl groups adjacent to multiple bond systems lower the frontier molecular orbitals (FMOs) Therefore, cycloaddition reactions preferentially occur with electron-rich multiple-bond systems The preference of bis(trifluoromethyl)-substituted hetero-l,3-dienes for polar reacuons makes them excellent model compounds for developing new types of diene reactions deviating from the well documented Diels-Alder scheme (pathway 1) A systematic study of the reactions of diene (1 =2-3=4)-dienophile (5=6) combinations reveals new synthetic possibilities that have not yet been fully exploited as tools for preparative organic cherrustry (equation 25)... 

Polyfluoroalkyl- and Perfluoroalkyl-Substituted CO and CN Multiple Bonds as Dienophiles in [4+2] Cycloaddition Reactions... 

One of the features of Diels-Alder reactions with most alkyl and aryl nitriles that has made them rather unattractive as dienophiles is the requirement of very high reaction temperatures Again, only when electron-withdrawing substituents are directly bonded to the nitnle function do [4+2] cycloaddition reactions occur at reasonably low temperatures [ 48, 231, 232] A high yield [4+2] cycloaddition was observed on reaction of 4,4-bis(trifluoromethyl) 1 thia-3-aza-l,3-butadienes with trifluoroacetonitrile at 150 °C [225]... 

Cycloaddition reactions where bis(trifluoromethyl)-substituted hetero-1,3-dienes act as dienophiles have been descnbed for open-chain and cyclic dienes [115, 126, 127] The balance of the diene -dienophile activity of bis(tnfluoro-methyl)-substituted hetero-l,3-dienes can be influenced strongly by the substituents bonded to the inuno nitrogen atom For instance, A/-(arylsulfonyl) denvatives of tnfluoroacetaldimine and hexafluoroacetone imine do not act as dienes but exhibit only the dienophile reactivity of electron deficient imines [5 229, 234,235, 236 237] (equation 52)... 

In contrast, when ot,P-unsaturated multiple bond systems act as dienophiles in concerted [4+2] cycloaddition reactions, they react across the C=C double bond Periselectivity as well as regiochemistry are explained on the basis of the size of the orbital coefficients and the resonance integrals [25S]... 

Cyanoallene, when treated with the morpholine enamine of cyclohexanone, undergoes a 1,3-cycloaddition reaction to form 72 (89). The reaction between cyanoallene and diendiamine 73a produces di-1,2-cycloaddition adduct 73 (i 9). The 4a-azonioanthracene ion (73b) readily undergoes a 1,4-cycloaddition reaction with nucleophilic dienophiles such as enamines (89a). The cycloaddition is stereoselective so that the a- and... 

Dihydropyridines 28 behave as enamines and undergo [2 - - 2] cycloaddition reactions with dienophiles such as acrylonitrile (29) and dimethyl acetylenedicar-boxylate (32). For instance, A -alkyl-l,4-dihydropyridine 28 reacts with 29 to give... 

Besides nucleophile-induced transformations the Hetero Diels-Alder (HDA) cycloaddition reactions are also very suitable ways to perform the pyrimidine-to-pyridine ring transformations. They can occur either by a reaction of an electron-poor pyrimidine system with an electron-rich dienophile (inverse HDA reactions) or by reacting an electron-enriched pyrimidine with an electron-poor dienophile (normal HDA reactions) (see Section II.B). 

The hetero Diels-Alder [4+2] cycloaddition (HDA reaction) is a very efficient methodology to perform pyrimidine-to-pyridine transformations. Normal (NHDA) and Inverse (IHDA) cycloaddition reactions, intramolecular as well as intermolecular, are reported, although the IHDA cycloadditions are more frequently observed. The NHDA reactions require an electron-rich heterocycle, which reacts with an electron-poor dienophile, while in the IHDA cycloadditions a n-electron-deficient heterocycle reacts with electron-rich dienophiles, such as 0,0- and 0,S-ketene acetals, S,S-ketene thioacetals, N,N-ketene acetals, enamines, enol ethers, ynamines, etc. 

The normal electron-demand reaction is a HOMOdiene-LUMOdienophUeelectron-rich dienes and electron-deficient dienophiles (Scheme 4.2, left dotted line). The inverse electron-demand cycloaddition reaction is primarily controlled by a LUMOdiene HOMOdienophiie inter-... 

NORMAL-ELECTRON DEMAND HOMO(jjene dienophile COntroll d cycloaddition reactions... 

The Diels-Alder reaction,is a cycloaddition reaction of a conjugated diene with a double or triple bond (the dienophile) it is one of the most important reactions in organic chemistry. For instance an electron-rich diene 1 reacts with an electron-poor dienophile 2 (e.g. an alkene bearing an electron-withdrawing substituent Z) to yield the unsaturated six-membered ring product 3. An illustrative example is the reaction of butadiene 1 with maleic anhydride 4 ... 

Mechanistically the observed stereospecificity can be rationalized by a concerted, pericyclic reaction. In a one-step cycloaddition reaction the dienophile 8 adds 1,4 to the diene 7 via a six-membered cyclic, aromatic transition state 9, where three r-bonds are broken and one jr- and two cr-bonds are formed. The arrangement of the substituents relative to each other at the stereogenic centers of the reactants is retained in the product 10, as a result of the stereospecific y -addition. 

In contrast to those unreactive dienes that can t achieve an s-cis conformation, other dienes are fixed only in the correct s-cis geometry and are therefore highly reactive in the Diels-Alder cycloaddition reaction. 1,3-Cyclopentadiene, for example, is so reactive that it reacts with itself. At room temperature, 1,3-cycIopentadiene dimerizes. One molecule acts as diene and a second molecule acts as dienophile in a self Diels-Alder reaction. 

The Diels-Alder cycloaddition reaction (Section 14.4) is a pericvclic process that takes place between a diene (four tt electrons) and a dienophile (two tr electrons) to yield a cyclohexene product. Many thousands of examples of Diels-Alder reactions are known. They often take place easily at room temperature or slightly above, and they are stereospecific with respect to substituents. For example, room-temperature reaction between 1,3-butadiene and diethyl maleate (cis) yields exclusively the cis-disubstituted cyclohexene product. A similar reaction between 1,3-butadiene and diethyl fumarate (trans) yields exclusively the trans-disubstituted product. 

Thermal and photochemical cycloaddition reactions always take place with opposite stereochemistry. As with electrocyclic reactions, we can categorize cycloadditions according to the total number of electron pairs (double bonds) involved in the rearrangement. Thus, a thermal Diels-Alder [4 + 2] reaction between a diene and a dienophile involves an odd number (three) of electron pairs and takes place by a suprafacial pathway. A thermal [2 + 2] reaction between two alkenes involves an even number (two) of electron pairs and must take place by an antarafacial pathway. For photochemical cyclizations, these selectivities are reversed. The general rules are given in Table 30.2. 

Cycloaddition reactions are those in which two unsaturated molecules add together to yield a cyclic product. For example, Diels-AJder reaction between a diene (four tt electrons) and a dienophile (two tt electrons) yields a cyclohexene. Cycloadditions can take place either by suprafacial or antarafacial pathways. Suprafacial cycloaddition involves interaction between lobes on the same face of one component and on the same face of the second component. Antarafacial cycloaddition involves interaction between lobes on the same face of one component ancl on opposite faces of the other component. The reaction course in a specific case can be found by looking at the symmetry of the HOMO of one component and the lowest unoccupied molecular orbital (LUMO) of the other component. 

Dienophile (Section 14.5) A compound containing a double bond that can take part in the Diels-Alder cycloaddition reaction. The most reactive dienophiles are those that have electron-withdrawing groups on the double bond. 

A key transformation in Corey s prostaglandin synthesis is a Diels-Alder reaction between a 5-(alkoxymethyl)-l,3-cyclopenta-diene and a ketene equivalent such as 2-chloroacrylonitrile (16). As we have already witnessed in Scheme 3, it is possible to bring about a smooth [4+2] cycloaddition reaction between 5-substituted cyclopentadiene 15 and 2-chloroacrylonitrile (16) to give racemic 14 as a mixture of epimeric chloronitriles. Under these conditions, the diastereomeric chloronitriles are both produced in racemic form because one enantiotopic face of dienophile 16 will participate in a Diels-Alder reaction with the same facility as the other enantiotopic face. In subsequent work, Corey s group demonstrated that racemic hydroxy acid 11, derived in three steps from racemic 14 (see Scheme 3), could be resolved in a classical fashion with (+)-ephe-... 

V-Acyliminium ions act as dienophiles in [4 + 2] cycloaddition reactions with conjugated dienes13, while A-acylimimum ions that (can) adopt an x-cis conformation are able to act as heterodienes in an inverse electron demand Diels-Alder process with alkenes or alkynes3 (see Section D. 1.6.1.1.). 

We have also used poly(propynoic acid) in our studies of the photochemical interaction of PCSs with dienophiles, such as maleic anhydride, tetracyanoethylene, and styrene. This photochemical reaction of Diels-Alder type is accompanied by the breakdown of the conjugation system and the formation of slightly colored adducts266. Together with the cycloaddition reaction, photodegradation of PPA and its adducts takes place. A cycloaddition reaction is always preceded by the formation of a donor-acceptor complex of a PCS with a dienophile. 

The comparison of rates of cycloaddition of maleic anhydride, tetracyanoethylene, and styrene to PPA shows that the latter, irrespective of the presence of electronegative groups, behaves in these reactions not as an electron-poor diene system. This fact, together with the composition of side products (giving evidence of PPA decarboxylation), allows the assumption to be made that the cycloaddition of dienophiles involves mainly decarboxylated polyene sections of cis-transoid structure213, 266. This is in agreement with the fact that PPA with predominant trans-transoid configuration interacts with these dienophiles at a substantially lower rate. The ultimate amounts of the dienophile combined with PPA of this structure is also considerably smaller. 

Since the first demonstration of a cycloaddition reaction of a, /f-unsaturated sulfones in 1938 by Alder and coworkers85, a variety of a, /3-unsaturated sulfones have been prepared and used as dienophiles. For example, when a mixture of p-tolyl vinyl sulfone and 2,3-dimethylbutadiene in benzene is heated at 145-150 °C for 10 h in a sealed tube, crystals of the cycloadduct (134) are obtained (equation 102). Other examples of this intermolecular cycloaddition reaction are given in Table 12. 

It has been established that alkoxy alkenylcarbene complexes participate as dienophiles in Diels-Alder reactions not only with higher rates but also with better regio- and stereoselectivities than the corresponding esters [95]. This is clearly illustrated in Scheme 51 for the reactions of an unsubstituted vinyl complex with isoprene. This complex reacts to completion at 25 °C in 3 h whereas the cycloaddition reaction of methyl acrylate with isoprene requires 7 months at the same temperature. The rate enhancement observed for this complex is comparable to that for the corresponding aluminium chloride-catalysed reactions of methyl acrylate and isoprene (Scheme 51). 

---