Cycloaddition double

N-Condensed 1,2,3-triazoline ring by 1,3-dipolar cycloaddition Double ring closure... 

Sulfonium ylides may be added to C N double bonds to yield aziridines in a formal [1 -t-2]-cycloaddition. Alkyl azides are decomposed upon heating or irradiating to yield ni-trenes, which may also undergo [ 1 + 2 -cycloaddition reactions to yield highly strained hetero-cycles (A.G. Hortmann, 1972). 

The two-bond disconnection (re/ro-cycloaddition) approach also often works very well if the target molecule contains three-, four-, or five-membered rings (see section 1.13 and 2.5). The following tricyclic aziridine can be transformed by one step into a monocyclic amine (W. Nagata, 1968). In synthesis one would have to convert the amine into a nitrene, which-would add spontcaneously to a C—C double bond in the vicinity. 

In the presence of a double bond at a suitable position, the CO insertion is followed by alkene insertion. In the intramolecular reaction of 552, different products, 553 and 554, are obtained by the use of diflerent catalytic spe-cies[408,409]. Pd(dba)2 in the absence of Ph,P affords 554. PdCl2(Ph3P)3 affords the spiro p-keto ester 553. The carbonylation of o-methallylbenzyl chloride (555) produced the benzoannulated enol lactone 556 by CO, alkene. and CO insertions. In addition, the cyclobutanone derivative 558 was obtained as a byproduct via the cycloaddition of the ketene intermediate 557[4I0]. Another type of intramolecular enone formation is used for the formation of the heterocyclic compounds 559[4l I]. The carbonylation of the I-iodo-1,4-diene 560 produces the cyclopentenone 561 by CO. alkene. and CO insertions[409,4l2]. 

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... 

Allylic phosphates are used for carbonylation in the presence of amines under pressure. Carbonylation of diethyl neryl phosphate (389) affords ethyl homonerate (390), maintaining the geometric integrity of the double bond[244]. The carbonylation of allyl phosphate in the presence of the imine 392 affords the /3-lactam 393. The reaction may be explained by the formation of the ketene 391 from the acyl phosphate, and its stereoselective (2 + 2] cycloaddition to the imine 392 to give the /3-lactam 393(247],... 

The simplest of all Diels-Alder reactions cycloaddition of ethylene to 1 3 butadi ene does not proceed readily It has a high activation energy and a low reaction rate Substituents such as C=0 or C=N however when directly attached to the double bond of the dienophile increase its reactivity and compounds of this type give high yields of Diels-Alder adducts at modest temperatures... 

Let us now examine the Diels-Alder cycloaddition from a molecular orbital perspective Chemical experience such as the observation that the substituents that increase the reac tivity of a dienophile tend to be those that attract electrons suggests that electrons flow from the diene to the dienophile during the reaction Thus the orbitals to be considered are the HOMO of the diene and the LUMO of the dienophile As shown m Figure 10 11 for the case of ethylene and 1 3 butadiene the symmetry properties of the HOMO of the diene and the LUMO of the dienophile permit bond formation between the ends of the diene system and the two carbons of the dienophile double bond because the necessary orbitals overlap m phase with each other Cycloaddition of a diene and an alkene is said to be a symmetry allowed reaction... 

Isocyanates are Hquids or soHds which are highly reactive and undergo addition reactions across the C=N double bond of the NCO group. Reactions with alcohols, carboxyUc acids, and amines have been widely exploited ia developiag a variety of commercial products. Cycloaddition reactions involving both the C=N and the C=0 double bond of the NCO group have been extensively studied and used for product development (1 9). 

Cyclo ddltion. Ketenes are ideal components ia [2 + 2] cycloadditions for additions to the opposite sides of a TT-system as shown ia the cyclobutane product (2) ia Figure 1. Electron-rich double bonds react readily with ketenes, even at room temperature and without catalysts. In conjugated systems, ketenes add ia a [2 + 2] fashion. This is illustrated ia the reaction foUowiag, where the preferential orientation of L (large substituent) and S (small substituent) is seen (40). This reaction has been used ia the synthesis of tropolone [533-75-5]. 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Ozonation ofAlkenes. The most common ozone reaction involves the cleavage of olefinic carbon—carbon double bonds. Electrophilic attack by ozone on carbon—carbon double bonds is concerted and stereospecific (54). The modified three-step Criegee mechanism involves a 1,3-dipolar cycloaddition of ozone to an olefinic double bond via a transitory TT-complex (3) to form an initial unstable ozonide, a 1,2,3-trioxolane or molozonide (4), where R is hydrogen or alkyl. The molozonide rearranges via a 1,3-cycloreversion to a carbonyl fragment (5) and a peroxidic dipolar ion or zwitterion (6). 

Clearly, in the case of (66) two amide tautomers (72) and (73) are possible, but if both hydroxyl protons tautomerize to the nitrogen atoms one amide bond then becomes formally cross-conjugated and its normal resonance stabilization is not developed (c/. 74). Indeed, part of the driving force for the reactions may come from this feature, since once the cycloaddition (of 72 or 73) has occurred the double bond shift results in an intermediate imidic acid which should rapidly tautomerize. In addition, literature precedent suggests that betaines such as (74) may also be present and clearly this opens avenues for alternative mechanistic pathways. 

In the case of vinylfurans and vinylpyrroles there is the possibility of cycloaddition involving either the cyclic diene system or the diene system including the double bond. 2-Vinylfuran reacts in high yield with maleic anhydride in ether at room temperature to form the adduct involving the exocyclic double bond. Similarly, 2- and 3-vinylpyrroles react with 7T-electron-deficient alkenes and alkynes under relatively mild conditions to give the corresponding tetrahydro- and dihydro-indoles (Scheme 51) (80JOC4515). 

Benzo[Z)]furans and indoles do not take part in Diels-Alder reactions but 2-vinyl-benzo[Z)]furan and 2- and 3-vinylindoles give adducts involving the exocyclic double bond. In contrast, the benzo[c]-fused heterocycles function as highly reactive dienes in [4 + 2] cycloaddition reactions. Thus benzo[c]furan, isoindole (benzo[c]pyrrole) and benzo[c]thiophene all yield Diels-Alder adducts (137) with maleic anhydride. Adducts of this type are used to characterize these unstable molecules and in a similar way benzo[c]selenophene, which polymerizes on attempted isolation, was characterized by formation of an adduct with tetracyanoethylene (76JA867). 

The ring opening of 2//-azirines to yield vinylnitrenes on thermolysis, or nitrile ylides on photolysis, also leads to pyrrole formation (B-82MI30301). Some examples proceeding via nitrile ylides are shown in Scheme 92. The consequences of attempts to carry out such reactions in an intramolecular fashion depend not only upon the spatial relationship of the double bond and the nitrile ylide, but also upon the substituents of the azirine moiety since these can determine whether the resulting ylide is linear or bent. The HOMO and second LUMO of a bent nitrile ylide bear a strong resemblance to the HOMO and LUMO of a singlet carbene so that 1,1-cycloadditions occur to carbon-carbon double bonds rather than the 1,3-cycloadditions needed for pyrrole formation. The examples in Scheme 93 provide an indication of the sensitivity of these reactions to structural variations. 

Dipolarophiles utilized in these cycloadditions leading to five-membered heterocycles contain either double or triple bonds between two carbon atoms, a carbon atom and a heteroatom, or two heteroatoms. These are shown in Scheme 9 listed in approximate order of decreasing activity from left to right. Small rings containing a double bond (either C=C or C=N) are also effective dipolarophiles, but these result in six- and seven-membered ring systems. 

The reaction is illustrated by the intramolecular cycloaddition of the nitrilimine (374) with the alkenic double bond separated from the dipole by three methylene units. The nitrilimine (374) was generated photochemically from the corresponding tetrazole (373) and the pyrrolidino[l,2-6]pyrazoline (375) was obtained in high yield 82JOC4256). Applications of a variety of these reactions will be found in Chapter 4.36. Other aspects of intramolecular 1,3-dipolar cycloadditions leading to complex, fused systems, especially when the 1,3-dipole and the dipolarophile are substituted into a benzene ring in the ortho positions, have been described (76AG(E)123). 

Dihydrofuran (376) and 2,5-dihydrofuran (377) react with nitrile oxides to give furo[2,3-6 ]isoxazoles (378) and furo[3,4-rf]isoxazoles (379), respectively, as cycloadducts. The double bonds of furan, pyrrole and thiophene also react when the nitrile oxide is generated in situ. Thus furan and benzonitrile oxide gave (380), and with 2-methyl-2-oxazoline the cycloadduct (381) was obtained (71AG(E)810). These and related cycloadditions are discussed in Chapter 4.36. 

In the alternative approach.the 1,3-dipolar system can be constructed in several ways. Treatment of a-chloroacylhydrazones of diaryl ketones and certain aralkyl and dialkyl ketones (382) with NaH in anhydrous THF gives l-(disubstituted methylene)-3-oxo-l,2-diazetidinium inner salts (383). Reaction of (383) with DMAD in methylene chloride gave (384), a 2 1 adduct with loss of CO. Double bond migration in (384) occurred on heating to give (385). The intermediate in the cycloaddition was found to be (386), which on heating lost CO to form a new ylide system which in turn underwent reaction with more DMAD <81JA7743). 

In theory, three isoxazolines are capable of existence 2-isoxazoline (2), 3-isoxazoline and 4-isoxazoline. The position of the double bond may also be designated by the use of the prefix A with an appropriate numerical superscript. Of these only the 2-isoxazolines have been investigated in any detail. The preparation of the first isoxazoline, 3,5-diphenyl-2-isoxazoline, from the reaction of )3-chloro-)3-phenylpropiophenone with hydroxylamine was reported in 1895 (1895CB957). Two major syntheses of 2-isoxazolines are the cycloaddition of nitrile A-oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamine. Since 2-isoxazolines are readily oxidized to isoxazoles and possess some of the unique properties of isoxazoles, they also serve as key intermediates for the synthesis of other heterocycles and natural products. 

Diene moieties, reactive in [2 + 4] additions, can be formed from benzazetines by ring opening to azaxylylenes (Section 5.09.4.2.3). 3,4-Bis(trifluoromethyl)-l,2-dithietene is in equilibrium with hexafluorobutane-2,3-dithione, which adds alkenes to form 2,3-bis-(trifluoromethyl)-l,4-dithiins (Scheme 17 Section 5.15.2.4.6). Systems with more than two conjugated double bonds can react by [6ir + 2ir] processes, which in azepines can compete with the [47t + 27t] reaction (Scheme 18 Section 5.16.3.8.1). Oxepins prefer to react as 47t components, through their oxanorcaradiene isomer, in which the 47r-system is nearly planar (Section 5.17.2.2.5). Thiepins behave similarly (Section 5.17.2.4.4). Nonaromatic heteronins also react in orbital symmetry-controlled [4 + 2] and [8 + 2] cycloadditions (Scheme 19 Section 5.20.3.2.2). 

The 27T-electrons of the carbon-nitrogen double bond of 1-azirines can participate in thermal symmetry-allowed [4 + 2] cycloadditions with a variety of substrates such as cyclo-pentadienones, isobenzofurans, triazines and tetrazines 71AHC(13)45). Cycloadditions also occur with heterocumulenes such as ketenes, ketenimines, isocyanates and carbon disulfide. It is also possible for the 27r-electrons of 1-azirines to participate in ene reactions 73HCA1351). 

Both (17) (74TL2841) and (18) (76JA4325) undergo cycloadditions at the double bond without disruption of the thiirane ring (80JOC2962, 80JA6633). This type of reaction has been used to convert (17) to the Dewar pyrrole (20) via the tricyclic thiirane (19) (77JA7350). 

The double bond in A7-methoxycarbonyl-2-azetine (237 Z = COaMe) undergoes acid or photocatalyzed hydration and subsequent ring opening to give the aldehyde (238). In cycloadditions it is inert to TCNE and diphenylisobenzofuran but it does react with dipyridyltetrazine (77CC806). 

The following compounds have been obtained from thiete 1,1-dioxide Substituted cycloheptatrienes, benzyl o-toluenethiosulfinate, pyrazoles, - naphthothiete 1,1-dioxides, and 3-subst1tuted thietane 1,1-dioxides.It is a dienophile in Diels-Alder reactions and undergoes cycloadditions with enamines, dienamines, and ynamines. Thiete 1,1-dioxide is a source of the novel intermediate, vinylsulfene (CH2=CHCH=SQ2). which undergoes cyclo-additions to strained olefinic double bonds, reacts with phenol to give allyl sulfonate derivatives or cyclizes unimolecularly to give an unsaturated sultene. - Platinum and iron complexes of thiete 1,1-dioxide have been reported. 

---