Cycloaddition compounds

Trapping reactions of benzoylmethyleneoxophosphorane 39 a with carbonyl compounds dispel any remaining doubts as to the existence of acylated phosphenes. Unlike the diphenylmethyleneoxophosphorane 9, whose P/C double bond participates in cycloadditions, compound 39 a acts as a hetero-1,3-diene and undergoes [4 + 2]-cycloaddition with aldehydes and ketones 10 I7,35> it may again be assumed that the reaction is a two-step process involving 55 as intermediate. 

With respect to the large number of unsaturated diazo and diazocarbonyl compounds that have recently been used for intramolecular transition metal catalyzed cyclopropanation reactions (6-8), it is remarkable that 1,3-dipolar cycloadditions with retention of the azo moiety have only been occasionally observed. This finding is probably due to the fact that these [3+2]-cycloaddition reactions require thermal activation while the catalytic reactions are carried out at ambient temperature. A7-AUyl carboxamides appear to be rather amenable to intramolecular cycloaddition. Compounds 254—256 (Scheme 8.61) cyclize intra-molecularly even at room temperature. The faster reaction of 254c (310) and diethoxyphosphoryl-substituted diazoamides 255 (311) as compared with diazoacetamides 254a (312) (xy2 25 h at 22 °C) and 254b (310), points to a LUMO (dipole) — HOMO(dipolarophile) controlled process. The A -pyrazolines expected... 

Propellane derivatives are available via intermolecular meta cycloaddition. Compounds 106 [81,82] and modhephene 107 [81] were obtained using this type of photocycloaddition (Sch. 21). Isoiridomyrmecin 108 [83] and decarboxyquadrone 109 [82] can be synthesized via the same photochemical key step. 

Cycloaddition reactions with anthracene [3], cyclopentadiene [3] and dienes of lower activity, such as naphthalene [4] and furans [6], are well known. In this contribution, we describe the competitive formation of [4+2] and [2+2] cycloaddition compounds resulting from Cl2Si=CHCH2tBu (3) and 6,6-dimethylpentafulvene. 

Scheme 1. Facile synthesis of [4+2] cycloaddition compounds from silene 3...

Thioxovinylidenetriphenylphosphorane is formed when the cycloaddition compound from oxovinyl-idenetriphenylphosphorane and carbon disulfide decomposes in a cycloreversion (equation 122). ... 

Nickel(0)-catalyzed [2 + 2 + 2] cocyclization of the precursor (177) in the presence of several chiral ligands afforded the chiral tetrahydroisoquinoline (178) in a novel asymmetric cycloaddition. Compound (178) could be transformed into the benzo[a]quinolizidine (180), albeit in modest enantiomeric excess, through a multistep route involving extension of the alkynic side chain at C-1 to yield (179), introduction of a cu halogen atom, reduction of the triple bond, A(-deprotection and final eyelization (Scheme 29) <94J0C6133>. 

In the presence of a double bond at a suitable position, the CO insertion is followed by alkene insertion. In the intramolecular reaction of 552, different products, 553 and 554, are obtained by the use of diflerent catalytic spe-cies[408,409]. Pd(dba)2 in the absence of Ph,P affords 554. PdCl2(Ph3P)3 affords the spiro p-keto ester 553. The carbonylation of o-methallylbenzyl chloride (555) produced the benzoannulated enol lactone 556 by CO, alkene. and CO insertions. In addition, the cyclobutanone derivative 558 was obtained as a byproduct via the cycloaddition of the ketene intermediate 557[4I0]. Another type of intramolecular enone formation is used for the formation of the heterocyclic compounds 559[4l I]. The carbonylation of the I-iodo-1,4-diene 560 produces the cyclopentenone 561 by CO. alkene. and CO insertions[409,4l2]. 

Aldehydes take part in the cycloaddition to give the methylenetetrahydrofuran 178 by the co-catalysis of Pd and Sn compounds[115]. A similar product 180 is obtained by the reaction of the allyl acetate 179, which has a tributyltin group instead of a TMS group, with aldehydesfl 16]. The pyrrolidine derivative 182 is formed by the addition of the tosylimine 181 to 154[117]. 

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... 

Cycloaddition of COj with the dimethyl-substituted methylenecyclopropane 75 proceeds smoothly above 100 °C under pressure, yielding the five-membered ring lactone 76. The regiocheraistry of this reaction is different from that of above-mentioned diphenyl-substituted methylenecyclopropanes 66 and 67[61], This allylic lactone 76 is another source of trimethylenemethane when it is treated with Pd(0) catalyst coordinated by dppe in refluxing toluene to generate 77, and its reaction with aldehydes or ketones affords the 3-methylenetetrahy-drofuran derivative 78 as expected for this intermediate. Also, the lactone 76 reacts with a, /3-unsaturated carbonyl compounds. The reaction of coumarin (79) with 76 to give the chroman-2-one derivative 80 is an example[62]. 

Indoles are usually constructed from aromatic nitrogen compounds by formation of the pyrrole ring as has been the case for all of the synthetic methods discussed in the preceding chapters. Recently, methods for construction of the carbocyclic ring from pyrrole derivatives have received more attention. Scheme 8.1 illustrates some of the potential disconnections. In paths a and b, the syntheses involve construction of a mono-substituted pyrrole with a substituent at C2 or C3 which is capable of cyclization, usually by electrophilic substitution. Paths c and d involve Diels-Alder reactions of 2- or 3-vinyl-pyrroles. While such reactions lead to tetrahydro or dihydroindoles (the latter from acetylenic dienophiles) the adducts can be readily aromatized. Path e represents a category Iley cyclization based on 2 -I- 4 cycloadditions of pyrrole-2,3-quinodimcthane intermediates. 

Hydroxy-THISs react with electron-deficient alkynes to give nonisol-able adducts that extrude carbonyl sulfide, affording pyrroles (23). Compound 16 (X = 0) seems particularly reactive (Scheme 16) (25). The cycloaddition to benzyne yields isoindoles in low- yield. Further cyclo-addition between isoindole and benzyne leads to an iminoanthracene as the main product (Scheme 17). The cycloadducts derived from electron-deficient alkenes are stable (23, 25) unless highly strained. Thus the two adducts, 18a (R = H, R = COOMe) and 18b (R = COOMe, R = H), formed from 7, both extrude furan and COS under the reaction conditions producing the pyrroles (19. R = H or COOMe) (Scheme 18). Similarly, the cycloadduct formed between 16 (X = 0) and dimethylfumarate... 

Again, it is noteworthy that 4-substituted 5-hydrdxythiazoles (24) react like 5-hydroxy-THISs with alkynes to give pyrroles and sometimes with alkenes to give exo-cycloadducts (Scheme 22). In the latter case other processes compete with the cycloaddition, becoming dominant when 24 is treated with azo-compounds, enamines, or heterocumulenes (31). 

The simplest of all Diels-Alder reactions cycloaddition of ethylene to 1 3 butadi ene does not proceed readily It has a high activation energy and a low reaction rate Substituents such as C=0 or C=N however when directly attached to the double bond of the dienophile increase its reactivity and compounds of this type give high yields of Diels-Alder adducts at modest temperatures... 

Vinylboranes are interesting dienophiles in the Diels-Alder reaction. Alkenylboronic esters show moderate reactivity and give mixtures of exo and endo adducts with cyclopentadiene and 1,3-cyclohexadiene (441). Dichloroalkenylboranes are more reactive and dialkylalkenylboranes react even at room temperature (442—444). Dialkylalkenylboranes are omniphilic dienophiles insensitive to diene substitution (444). In situ formation of vinyl-boranes by transmetaHation of bromodialkylboranes with vinyl tri alkyl tin compounds makes possible a one-pot reaction, avoiding isolation of the intermediate vinylboranes (443). Other cycloadditions of alkenyl- and alkynylboranes are known (445). 

The chemistry of ketenes is dominated by their high reactivity most of them are not stable under normal conditions, many exist only as transient Species. Nucleophilic attack at the j -carbon, [2 + 2] cycloadditions, and ketene iasertion iato single bonds are the most important and widely used reactions of such compounds. 

Simple olefins do not usually add well to ketenes except to ketoketenes and halogenated ketenes. Mild Lewis acids as well as bases often increase the rate of the cyclo addition. The cycloaddition of ketenes to acetylenes yields cyclobutenones. The cycloaddition of ketenes to aldehydes and ketones yields oxetanones. The reaction can also be base-cataly2ed if the reactant contains electron-poor carbonyl bonds. Optically active bases lead to chiral lactones (41—43). The dimerization of the ketene itself is the main competing reaction. This process precludes the parent compound ketene from many [2 + 2] cyclo additions. Intramolecular cycloaddition reactions of ketenes are known and have been reviewed (7). 

A shippable but somewhat less reactive form of diketene is its acetone adduct, 2,2,6-trimethyl-4JT-l,3-dioxin-4-one (15) (103,104). Thermolysis of this safer to handle compound provides acetylketene, a reactive intermediate that can be used for acetoacetylation and cycloaddition reactions. The diketene—acetone adduct as weH as / fZ-butylaceto acetate [1694-31 -1] (also used for aceto acetylations by the trans aceto acetylation reaction) (130), are offered commercially. 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Methacryhc acid and its ester derivatives are Ctfjy -unsaturated carbonyl compounds and exhibit the reactivity typical of this class of compounds, ie, Michael and Michael-type conjugate addition reactions and a variety of cycloaddition and related reactions. Although less reactive than the corresponding acrylates as the result of the electron-donating effect and the steric hindrance of the a-methyl group, methacrylates readily undergo a wide variety of reactions and are valuable intermediates in many synthetic procedures. 

Most ozonolysis reaction products are postulated to form by the reaction of the 1,3-zwitterion with the extmded carbonyl compound in a 1,3-dipolar cycloaddition reaction to produce stable 1,2,4-trioxanes (ozonides) (17) as shown with itself (dimerization) to form cycHc diperoxides (4) or with protic solvents, such as alcohols, carboxyUc acids, etc, to form a-substituted alkyl hydroperoxides. The latter can form other peroxidic products, depending on reactants, reaction conditions, and solvent. 

From Diazo Compounds via 1,3-Dipolar Cycloaddition. This method has been utilized widely in heterocychc chemistry. Pyrazohne (57) has been synthesized by reaction of ethyl diazoacetate (58) with a,P-unsaturated ester in the presence of pyridine (eq. 12) (42). 

Pyridazine carboxylates and dicarboxylates undergo cycloaddition reactions with unsaturated compounds with inverse electron demand to afford substituted pyridines and benzenes respectively (Scheme 45). 

Since diazaquinones are among the most powerful dienophiles, they undergo [4+2] cycloaddition (Diels-Alder) reactions with a great variety of dienes to give various heterocyclic systems accessible with difficulty by other methods. Diazaquinone reacts with butadiene and substituted butadienes, carbocyclic and heterocyclic dienes, 1-vinylcycloalkenes, polyaromatic compounds and vinylaromatic compounds to afford bicyclic and polycyclic bridgehead diaza systems, including diazasteroids (Scheme 56). 

Cycloadditions of diazaquinones with unsaturated compounds yield diazacyc-lobutanes, from which N-substituted 3-hydroxypyridazin-6(l/f)-ones are formed after addition of water, t-butanol or acetic acid (Scheme 56). The same types of compound are also obtained from enamines. 

On the other hand, unsaturated diazo compounds are thermally transformed by 1,1-cycloaddition into a bicyclic pyrazqle (141). Although reversibility of this cycloaddition is... 

A large number of pyridazines are synthetically available from [44-2] cycloaddition reactions. In one general method, azo or diazo compounds are used as dienophiles, and a second approach is based on the reaction between 1,2,4,5-tetrazines and various unsaturated compounds. The most useful azo dienophile is a dialkyl azodicarboxylate which reacts with appropriate dienes to give reduced pyridazines and cinnolines (Scheme 89). With highly substituted dienes the normal cycloaddition reaction is prevented, and, if the ethylenic group in styrenes is substituted with aryl groups, indoles are formed preferentially. The cycloadduct with 2,3-pentadienal acetal is a tetrahydropyridazine derivative which has been used for the preparation of 2,5-diamino-2,5-dideoxyribose (80LA1307). 

---