Contact mechanics polymer

As mentioned earlier, the contact-mechanics-based experimental studies of interfacial adhesion primarily include (1) direct measurements of surface and interfacial energies of polymers and self-assembled monolayers (2) quantitative studies on the role of interfacial coupling agents in the adhesion of elastomers (3) adhesion of microparticles on surfaces and (4) adhesion of viscoelastic polymer particles. In these studies, a variety of experimental tools have been employed by different researchers. Each one of these tools offers certain advantages over the others. These experimental studies are reviewed in Section 4. 

Section 4.1 briefly describes some of the commonly employed experimental tools and procedures. Chaudhury et al., Israelachvili et al. and Tirrell et al. employed contact mechanics based approach to estimate surface energies of different self-assembled monolayers and polymers. In these studies, the results of these measurements were compared to the results of contact angle measurements. These measurements are reviewed in Section 4.2. The JKR type measurements are discussed in Section 4.2.1, and the measurements done using the surface forces apparatus (SFA) are reviewed in Section 4.2.2. 

Some of the recent work in contact mechanics is focused on understanding the adhesion of viscoelastic polymers and dynamic contributions to the adhesion energy this work is summarized in Section 5. Sections 6.1 and 6.2 include some of the current applications of contact mechanics in the field of adhesion science. These include possible studies on contact induced interfacial rearrangements and acid-base type of interactions. 

Some of these findings are in agreement with the observation of Chaudhury and Whitesides [47], In an extension of these studies, Tirrell and coworkers [62,63,70, 88-90] studied the contact mechanics of polymer surfaces using the SFA. 

As reviewed so far, the contact-mechanics-based techniques (JKR and SFA methods) have been effective in the understanding molecular level mechanisms related to the adhesion of elastomers and in measuring the surface and interfacial energies of polymers and self-assembled monolayers. The current work in this area is aimed at understanding contact induced interfacial rearrangements and the role of specific interactions. The recent progress of these studies is discussed in this section. 

The study of acid-base interaction is an important branch of interfacial science. These interactions are widely exploited in several practical applications such as adhesion and adsorption processes. Most of the current studies in this area are based on calorimetric studies or wetting measurements or peel test measurements. While these studies have been instrumental in the understanding of these interfacial interactions, to a certain extent the interpretation of the results of these studies has been largely empirical. The recent advances in the theory and experiments of contact mechanics could be potentially employed to better understand and measure the molecular level acid-base interactions. One of the following two experimental procedures could be utilized (1) Polymers with different levels of acidic and basic chemical constitution can be coated on to elastomeric caps, as described in Section 4.2.1, and the adhesion between these layers can be measured using the JKR technique and Eqs. 11 or 30 as appropriate. For example, poly(p-amino styrene) and poly(p-hydroxy carbonyl styrene) can be coated on to PDMS-ox, and be used as acidic and basic surfaces, respectively, to study the acid-base interactions. (2) Another approach is to graft acidic or basic macromers onto a weakly crosslinked polyisoprene or polybutadiene elastomeric networks, and use these elastomeric networks in the JKR studies as described in Section 4.2.1. 

A direct proof of the existence of the contact mechanism Scheme 9 was obtained by the authors of work 71) who used ultracentrifugation to observe a fraction consisting of all three polymers, i.e., a triple polycomplex which was an intermediary (and in some cases the final72)) product of the substitution reaction. 

When the experimentalist set an ambitious objective to evaluate micromechanical properties quantitatively, he will predictably encounter a few fundamental problems. At first, the continuum description which is usually used in contact mechanics might be not applicable for contact areas as small as 1 -10 nm [116,117]. Secondly, since most of the polymers demonstrate a combination of elastic and viscous behaviour, an appropriate model is required to derive the contact area and the stress field upon indentation a viscoelastic and adhesive sample [116,120]. In this case, the duration of the contact and the scanning rate are not unimportant parameters. Moreover, bending of the cantilever results in a complicated motion of the tip including compression, shear and friction effects [131,132]. Third, plastic or inelastic deformation has to be taken into account in data interpretation. Concerning experimental conditions, the most important is to perform a set of calibrations procedures which includes the (x,y,z) calibration of the piezoelectric transducers, the determination of the spring constants of the cantilever, and the evaluation of the tip shape. The experimentalist has to eliminate surface contamination s and be certain about the chemical composition of the tip and the sample. 

Johnson, K.L, (1985) Contact Mechanics, Cambridge University Press., Cambridge. Kanig, G. (1975) Prog. Colloid Polym. Sci. 57, 176. 

Abrasive Wear. Abrasive wear(18) is common for brittle, ductile and elastomeric polymers. Abrasion is the wear by displacement of materials from surfaces in relative motion caused by the presence of hard protruberanees or by the presence of hard particles either between the surfaces or embedded in one of them. As a result, microploughing, microshearing or microcutting can occur. Thus, fracture energetics and contact mechanics are involved in analyzing the wear results. We shall discuss briefly the wear rate with respect to different types of polymers. 

Contact Mechanics and Interfacial Fatigue Studies Between Thin Semicrystalline and Glassy Polymer Films... 

I 23 Contact Mechanics and Inteifacial Fatigue Studies Between Semicrystalline and Polymer Films... 

---