Compounding reactive modification

Figure 7.12 Amine-containing dendrimers can be modified using a number of common reactive modification agents. Excess amine groups can be blocked using acetic anhydride, glycidol, or an NHS-mPEG compound. Amines also can be converted into carboxylates using succinic anhydride.

Modifeation of alumina surfaee to enhance selective adsorption of particular compounds is an area of rapid development. The activated alumina surface contains a range of surface sites differing in their chemical structure and reactivity. Modification of the surface to contain a greater proportions of surface fuctionalities that enhance the desired separtion or reaction which reducing undesired sites, is a powerful tool in the design of selective adsorption process. In the present study the modification of alumina surface is effected by treatment with acid and base to enhance the adsorption of an antioxidant (tert-butyl catechol) from aromatic hydrocarbon (styrene). 

For hollow objects like the fullerenes, a general distinction has to be made between outside and inside reactivity. Modifications to the outside are termed exohedral functionalization, and those to the inside are endohedral. Both variants are observed for the fullerenes. Classical fullerene chemistry deals with exohedral functionalization by one or more groups attached to the carbon atoms. Endohedral chemistry, on the other hand, studies compounds consisting of atoms or small molecules included in the cavity within the fullerene cage. The exohedral processes may further be divided into covalent and noncovalent interactions with the reaction partner. 

Joseph Paul, and Tretsiakova-Mcnally Svetlana. Reactive modifications of some chain- and step-growth polymers with phosphorus-containing compounds Effects on flame retar-dance-a review. Polym. Adv. Technol. 22 no. 4 (2011) 395-406. 

The results in table 2.6 show that the rates of reaction of compounds such as phenol and i-napthol are equal to the encounter rate. This observation is noteworthy because it shows that despite their potentially very high reactivity these compounds do not draw into reaction other electrophiles, and the nitronium ion remains solely effective. These particular instances illustrate an important general principle if by increasing the reactivity of the aromatic reactant in a substitution reaction, a plateau in rate constant for the reaction is achieved which can be identified as the rate constant for encounter of the reacting species, and if further structural modifications of the aromatic in the direction of further increasing its potential reactivity ultimately raise the rate constant above this plateau, then the incursion of a new electrophile must be admitted. 

The significance of establishing a limiting rate of reaction upon encounter for mechanistic studies has been pointed out ( 2.5). In studies of reactivity, as well as settii an absolute limit to the significance of reactivity in particular circumstances, the experimental observation of the limit has another dependent importance if further structural modification of the aromatic compound leads ultimately to the onset of reaction at a rate exceeding the observed encounter rate then a new electrophile must have become operative, and reactivities established above the encounter rate cannot properly be compared with those measured below it. 

Most commercial processes involve copolymerization of ethylene with the acid comonomer followed by partial neutralization, using appropriate metal compounds. The copolymerization step is best carried out in a weU-stirred autoclave with continuous feeds of all ingredients and the free-radical initiator, under substantially constant environment conditions (22—24). Owing to the relatively high reactivity of the acid comonomer, it is desirable to provide rapid end-over-end mixing, and the comonomer content of the feed is much lower than that of the copolymer product. Temperatures of 150—280°C and pressures well in excess of 100 MPa (1000 atm) are maintained. Modifications on the basic process described above have been described (25,26). When specific properties such as increased stiffness are required, nonrandom copolymers may be preferred. An additional comonomer, however, may be introduced to decrease crystallinity (10,27). 

Complexation of the initiator and/or modification with cocatalysts or activators affords greater polymerization activity (11). Many of the patented processes for commercially available polymers such as poly(MVE) employ BE etherate (12), although vinyl ethers can be polymerized with a variety of acidic compounds, even those unable to initiate other cationic polymerizations of less reactive monomers such as isobutene. Examples are protonic acids (13), Ziegler-Natta catalysts (14), and actinic radiation (15,16). 

Etherification. The accessible, available hydroxyl groups on the 2, 3, and 6 positions of the anhydroglucose residue are quite reactive (40) and provide sites for much of the current modification of cotton ceUulose to impart special or value-added properties. The two most common classes into which modifications fall include etherification and esterification of the cotton ceUulose hydroxyls as weU as addition reactions with certain unsaturated compounds to produce ceUulose ethers (see Cellulose, ethers). One large class of ceUulose-reactive dyestuffs in commercial use attaches to the ceUulose through an alkaH-catalyzed etherification by nucleophilic attack of the chlorotriazine moiety of the dyestuff ... 

In conclusion, a variety of linear or cyclic oligo(phospholes)s and their derivatives are accessible via a set of efficient synthetic strategies. The potential of these compounds as advanced 71-conjugated systems is broadened by the presence of reactive trivalent P-centres, which allow a range of additional chemical modifications to be achieved. However, elucidation of structure-property relationships for these derivatives is still needed. 

The main differences between these oxidations and those of monofunctional compounds are (i) the greater number of possible sites of attack, (i7) the more frequent modification of kinetics by complex formation and in) the almost inevitable greater reactivity. 

The direct reaction of zinc metal with organic iodides dates back to the work of Frankland(67). Several modifications have been suggested since that time to increase the reactivity of the metal. The majority of these modifications have employed zinc-copper couples(68-72), sodium-zinc alloys(73), or zinc-silver couples(77). Some recent work has indicated that certain zinc-copper couples will react with alkyl bromides to give modest yields of dialkylzinc compounds(74,73). However, all attempts to react zinc with aryl iodides or bromides have met with failure. The primary use of zinc couples has been in the Simmons-Smith reaction. This reaction has been primarily used with diiodomethane as 1,1-dibromides or longer chain diiodides have proven to be too unneactive even with the most reactive zinc couples. 

---