Chromium elemental

Various sulphides of the chromium elements exist, and these, particularly in the case of molybdenum and tungsten, combine with alkalies and alkali sulphides to produce thio-salts thus, thio-tungstates of the types R jW03S, R WOjSj, R WOSg, and R WS, have been prepared. 

The electron configurations of certain elements appear to violate the rules we have just discussed. For example, Figme 6.31 shows that the electron configuration of chromium (element 24) is [Ar]3d 4s rather than the [Ar]3d 4s configuration we might expect. Similarly, the configuration of copper (element 29) is [Ar]3d 4s instead of [Ar]3d 4s. ... 

By reference to the outline periodic table shown on p. (i) we see that the metals and non-metals occupy fairly distinct regions of the table. The metals can be further sub-divided into (a) soft metals, which are easily deformed and commonly used in moulding, for example, aluminium, lead, mercury, (b) the engineering metals, for example iron, manganese and chromium, many of which are transition elements, and (c) the light metals which have low densities and are found in Groups lA and IIA. 

The reactivity of the transition metals towards other elements varies widely. In theory, the tendency to form other compounds both in the solid state (for example reactions to form cations) should diminish along the series in practice, resistance to reaction with oxygen (due to formation of a surface layer of oxide) causes chromium (for example) to behave abnormally hence regularities in reactivity are not easily observed. It is now appropriate to consider the individual transition metals. 

Scandinavian goddess, Vanadis) Vanadium was first discovered by del Rio in 1801. Unfortunately, a French chemist incorrectly declared that del Rio s new element was only impure chromium. Del Rio thought himself to be mistaken and accepted the French chemists s statement. 

Chemical ingenuity in using the properties of the elements and their compounds has allowed analyses to be carried out by processes analogous to the generation of hydrides. Osmium tetroxide is very volatile and can be formed easily by oxidation of osmium compounds. Some metals form volatile acetylacetonates (acac), such as iron, zinc, cobalt, chromium, and manganese (Figure 15.4). Iodides can be oxidized easily to iodine (another volatile element in itself), and carbonates or bicarbonates can be examined as COj after reaction with acid. 

Common alloying elements include nickel to improve low temperature mechanical properties chromium, molybdenum, and vanadium to improve elevated-temperature properties and silicon to improve properties at ordinary temperatures. Low alloy steels ate not used where corrosion is a prime factor and are usually considered separately from stainless steels. 

Analysis of Trace or Minor Components. Minor or trace components may have a significant impact on quaHty of fats and oils (94). Metals, for example, can cataly2e the oxidative degradation of unsaturated oils which results in off-flavors, odors, and polymeri2ation. A large number of techniques such as wet chemical analysis, atomic absorption, atomic emission, and polarography are available for analysis of metals. Heavy metals, iron, copper, nickel, and chromium are elements that have received the most attention. Phosphoms may also be detectable and is a measure of phosphoHpids and phosphoms-containing acids or salts. 

Germanium tetrachloride refined for use in making optical fibers is usually specified to contain less than 0.5 to 5 ppb of each of eight impurities vanadium, chromium, manganese, iron, cobalt, nickel, copper, and zinc. Limits are sometimes specified for a few other elements. Also of concern are hydrogen-bearing impurities therefore, maximum limits of 5 to 10 ppm are usually placed on HCl, OH, CH2, and CH contents. 

Plain Carbon and Low Alloy Steels. For the purposes herein plain carbon and low alloy steels include those containing up to 10% chromium and 1.5% molybdenum, plus small amounts of other alloying elements. These steels are generally cheaper and easier to fabricate than the more highly alloyed steels, and are the most widely used class of alloys within their serviceable temperature range. Figure 7 shows relaxation strengths of these steels and some nickel-base alloys at elevated temperatures (34). 

Steels iu the AISI 400 series contain a minimum of 11.5% chromium and usually not more than 2.5% of any other aHoyiag element these steels are either hardenable (martensitic) or nonhardenable, depending principally on chromium content. Whereas these steels resist oxidation up to temperatures as high as 1150°C, they are not particularly strong above 700°C. Steels iu the AISI 300 series contain a minimum of 16% chromium and 6% nickel the relative amounts of these elements are balanced to give an austenitic stmcture. These steels caimot be strengthened by heat treatment, but can be strain-hardened by cold work. 

Because of its position in the Periodic Table, molybdenum has sometimes been linked to chromium (see Chromiumand chromium alloys) or to other heavy metals. However, unlike those elements, molybdenum and its compounds have relatively low toxicity, as shown in Table 3. On the other hand, molybdenum has been identified as a micronutrient essential to plant life (11,12) (see Fertilizers), and plays a principal biochemical role in animal health as a constituent of several important enzyme systems (see Mineral nutrients). 

---