Chromatography spectrometer coupling

FIGURE 10.21 An illustration of a mass spectrometer coupled to a chromatography instrument. 

The amount of cresol in the concentrated extract can then be determined by high performance liquid chromatography (HPLC) (DeRosa et al. 1987 Yoshikawa et al. 1986) or gas chromatography (GC) coupled to either a flame ionization detector (FID) or a mass spectrometer detection system (Angerer 1985 Needham et al. 1984). Separation of the cresol isomers by gas chromatography is readily accomplished, and the use of an appropriate internal standard allows the determination of their concentrations. Although exact detection limits were not given for the above GC methods, a concentration of 10 ppm appears to be readily determined. 

The extremely sensitive inductively coupled plasma-mass spectrometer was described in Section 21-6. Figure 24-23 shows 15 pesticides measured by gas chromatography— inductively coupled plasma-mass spectrometry. Eluate was atomized and ionized in the plasma. Ions were measured by a mass spectrometer that could monitor any set of mlz values. The figure shows traces for P, S, I Cl, or Br. 

Nassar, A. E. (2003). Online hydrogen-deuterium exchange and a tandem-quadrupole time-of-flight mass spectrometer coupled with liquid chromatography for metabolite identification in drug metabolism. J. Chromatogr. Sci. 41 398-404. 

Principal component analysis is most easily explained by showing its application on a familiar type of data. In this chapter we show the application of PCA to chromatographic-spectroscopic data. These data sets are the kind produced by so-called hyphenated methods such as gas chromatography (GC) or high-performance liquid chromatography (HPLC) coupled to a multivariate detector such as a mass spectrometer (MS), Fourier transform infrared spectrometer (FTIR), or UV/visible spectrometer. Examples of some common hyphenated methods include GC-MS, GC-FTIR, HPLC-UV/Vis, and HLPC-MS. In all these types of data sets, a response in one dimension (e.g., chromatographic separation) modulates the response of a detector (e.g., a spectrum) in a second dimension. 

Wang, R.Y., Hsu, Y.L., Chang, L.F., Jiang, S.J. Speciation analysis of arsenic and selenium compounds in environmental and biological samples by ion chromatography -inductively coupled plasma dynamic reaction cell mass spectrometer. Anal. Chim. Acta 590, 239-244 (2007)... 

Besides the universal detector systems, for example electron capture, flame ionisation and thermal conductivity usually coupled with gas chromatographic columns, various other detectors are now being used to provide specific information. For example, the gas chromatograph/mass spectrometer couple has been used for structure elucidation of the separated fractions. The mechanics of this hybrid technique have been described by Message (1984). Other techniques used to detect the metal and/or metalloid constituents include inductively coupled plasma spectrometry and atomic absorption spectrometry. Ebdon et al. (1986) have reviewed this mode of application. The type and mode of combination of the detectors depend on the ingenuity of the investigator. Krull and Driscoll (1984) have reviewed the use of multiple detectors in gas chromatography. 

A single capillary scale reverse phase high-performance liquid chromatography system coupled online to automated electrospray ion trap tandem mass spectrometry (ID-LCMS) is usually performed to characterize the protein fractions. The following protocol is an example of the implementation of the method to identify the peptide components of tryptic digests of the yeast HPLC fractions analysis using the ion trap tandem mass spectrometer instrument described in Section 13.2.2.5, and typical results are shown in Figure 13.2-3. 

Pritzl, G., Stuer-Lauridsen, R, Carlsen, L., Jensen, A. K., andThorsen, T. K. (1996) A versatile capillary gas chromatography inductively coupled plasma mass spectrometer interface. Int J. Environ. Anal. Chem., 62, 147-59. 

The chromatogram can finally be used as the series of bands or zones of components or the components can be eluted successively and then detected by various means (e.g. thermal conductivity, flame ionization, electron capture detectors, or the bands can be examined chemically). If the detection is non-destructive, preparative scale chromatography can separate measurable and useful quantities of components. The final detection stage can be coupled to a mass spectrometer (GCMS) and to a computer for final identification. 

Gas chromatography is not an identification method the components must be identified after their separation by capillary column. This is done by coupling to the column a mass spectrometer by which the components can be identified with the aid of spectra libraries. However tbe analysis takes a long time (a gasoline contains aboutTwo hundred components) so it is not practical to repeat it regularly. Furthermore, analysts have developed te hpiques for identifying... 

Analytical chemistry has in recent years been equipped with a number of powerful means of investigation. Their application, especially that of gas-phase chromatography coupled with a mass spectrometer, has demonstrated the presence of a certain number of thiazoles in natural products such as fruits or cereals (287. 288, 297). The many results are shown in Table III-59. 

Mixtures passed through special columns (chromatography) in the gas phase (GC) or liquid phase (LC) can be separated into their individual components and analyzed qualitatively and/or quantitatively. Both GC and LC analyzers can be directly coupled to mass spectrometers, a powerful combination that can simultaneously separate and identify components of mixtures. 

Reversed-phase high-performance liquid chromatography (HPLC) column 50 mm x 3.2-mm i.d. with Kromasil 5- um Gig packing High-performance liquid chromatograph coupled to a triple-quadrupole mass spectrometer with an atmospheric pressure chemical ionization (APCI) source Gel permeation chromatograph with a 60 mm x 25-mm i.d. column packed with Bio-Beads SX-3 (50-g)... 

---