Chlorobenzene, oxidation

The 3-(-butoxycarbonylbenzene oxide 104 has been prepared by dehydro-bromination of either the saturated dibromo epoxide 105 or the unsaturated monobromo epoxide 106, S Similarly, 3-chlorobenzene oxide (107) is prepared by dehydrobromination of the dibromochloro epoxide 108,5 5 and 4-... 

The inwitro metabolites of chlorobenzene are o-chlorophenol, m- chlorophenol, and p-chlorophenol the proportions differ according to the source of the mono-oxygenase system and its state of purity (Selander et al. 1975). The o- and p-chlorophenols result from isomerization of the intermediate 3-and 4-chlorobenzene oxides, respectively. The formation of m-chlorophenol appears to occur via a direct oxidative pathway (Oesch et al. 1973). In vitro conjugation of the arene oxide with glutathione or hydration is not a significant pathway (Selander et al. 1975). 

The reactivity of iodylbenzene was increased in the presence of trifluoroacetic acid for example, PhSCH2CH2N02 was converted into its sulphoxide (97%) at room temperature [11]. 4-t-Butyliodylbenzene in hot chlorobenzene oxidized tetralin to a-tetralone (97%) [12] it also brought about the opening of the pyrrole ring in a derivative of tryptophan [13]. 

Figure 4.6. Scheme of the chlorobenzene oxidation in the absence (A) and in the presence (B) of NO over V0x/Ti02 catalysts (schemes from Bertinchamps et al ). 

During Cl-VOCs oxidation under nohle metal-hased catalysts, a significant volume of unsaturated chlorinated by-products — such as polychlorinated benzenes during chlorobenzene oxidation or tetrachloethylene (PCE) during TCE oxidation — are produced. Depending on the choice of the nohle metal,... 

Obtained synthetically by one of the following processes fusion of sodium ben-zenesulphonate with NaOH to give sodium phenate hydrolysis of chlorobenzene by dilute NaOH at 400 C and 300atm. to give sodium phenate (Dow process) catalytic vapour-phase reaction of steam and chlorobenzene at 500°C (Raschig process) direct oxidation of cumene (isopropylbenzene) to the hydroperoxide, followed by acid cleavage lo propanone and phenol catalytic liquid-phase oxidation of toluene to benzoic acid and then phenol. Where the phenate is formed, phenol is liberated by acidification. 

Usually, iodides and bromides are used for the carbonylation, and chlorides are inert. I lowever, oxidative addition of aryl chlorides can be facilitated by use of bidcntatc phosphine, which forms a six-membered chelate structure and increa.scs (he electron density of Pd. For example, benzoate is prepared by the carbonylation of chlorobenzene using bis(diisopropylphosphino)propane (dippp) (456) as a ligand at 150 [308]. The use of tricyclohexylphosphine for the carbonylation of neat aryl chlorides in aqueous KOH under biphasic conditions is also recommended[309,310]. 

The first detailed investigation of the reaction kinetics was reported in 1984 (68). The reaction of bis(pentachlorophenyl) oxalate [1173-75-7] (PCPO) and hydrogen peroxide cataly2ed by sodium saUcylate in chlorobenzene produced chemiluminescence from diphenylamine (DPA) as a simple time—intensity profile from which a chemiluminescence decay rate constant could be determined. These studies demonstrated a first-order dependence for both PCPO and hydrogen peroxide and a zero-order dependence on the fluorescer in accord with an earher study (9). Furthermore, the chemiluminescence quantum efficiencies Qc) are dependent on the ease of oxidation of the fluorescer, an unstable, short-hved intermediate (r = 0.5 /is) serves as the chemical activator, and such a short-hved species "is not consistent with attempts to identify a relatively stable dioxetane as the intermediate" (68). 

PMMA is not affected by most inorganic solutions, mineral oils, animal oils, low concentrations of alcohols paraffins, olefins, amines, alkyl monohahdes and ahphatic hydrocarbons and higher esters, ie, >10 carbon atoms. However, PMMA is attacked by lower esters, eg, ethyl acetate, isopropyl acetate aromatic hydrocarbons, eg, benzene, toluene, xylene phenols, eg, cresol, carboHc acid aryl hahdes, eg, chlorobenzene, bromobenzene ahphatic acids, eg, butyric acid, acetic acid alkyl polyhaHdes, eg, ethylene dichloride, methylene chloride high concentrations of alcohols, eg, methanol, ethanol 2-propanol and high concentrations of alkahes and oxidizing agents. 

The most widely used process for the production of phenol is the cumene process developed and Hcensed in the United States by AHiedSignal (formerly AHied Chemical Corp.). Benzene is alkylated with propylene to produce cumene (isopropylbenzene), which is oxidized by air over a catalyst to produce cumene hydroperoxide (CHP). With acid catalysis, CHP undergoes controUed decomposition to produce phenol and acetone a-methylstyrene and acetophenone are the by-products (12) (see Cumene Phenol). Other commercial processes for making phenol include the Raschig process, using chlorobenzene as the starting material, and the toluene process, via a benzoic acid intermediate. In the United States, 35-40% of the phenol produced is used for phenoHc resins. 

Perhalates. Whereas silver perchlorate [7783-93-9] AgClO, and silver periodate [15606-77-6] AglO, are well known, silver perbromate [54494-97-2] AgBrO, has more recendy been described (18). Silver perchlorate is prepared from silver oxide and perchloric acid, or by treating silver sulfate with barium perchlorate. Silver perchlorate is one of the few silver salts that is appreciably soluble in organic solvents such as glycerol, toluene, and chlorobenzene. 

Present Day Methods, In the Grignard Sjnthesis (82,83), chlorobenzene [108-90-7] is converted to phenyhnagnesium chloride which reacts with ethylene oxide [75-21-8] at 100°C to give P-phenylethoxy magnesium chloride which is then decomposed with sulfuric acid to give PEA. 

Triphenylene has been prepared by self-condensation of cyclohexanone using sulfuric acid or polyphosphoric acid followed by dehydrogenation of the product, palladium-charcoal, or selenium by electrolytic oxidation of cycloliexanone from chlorobenzene and sodium or phenyllilhium from 2-cyclolu xyl-l-phenylcyelohexanol or... 

Kondo maintained his interest in this area, and with his collaborators [62] he recently made detailed investigations on the polymerization and preparation of methyl-4-vinylphenyl-sulfonium bis-(methoxycarbonyl) meth-ylide (Scheme 27) as a new kind of stable vinyl monomer containing the sulfonium ylide structure. It was prepared by heating a solution of 4-methylthiostyrene, dimethyl-diazomalonate, and /-butyl catechol in chlorobenzene at 90°C for 10 h in the presence of anhydride cupric sulfate, and Scheme 27 was polymerized by using a, a -azobisi-sobutyronitrile (AIBN) as the initiator and dimethylsulf-oxide as the solvent at 60°C. The structure of the polymer was confirmed by IR and NMR spectra and elemental analysis. In addition, this monomeric ylide was copolymerized with vinyl monomers such as methyl methacrylate (MMA) and styrene. 

Now that the allylic oxidation problem has been solved adequately, the next task includes the introduction of the epoxide at C-l and C-2. When a solution of 31 and pyridinium para-tolu-enesulfonate in chlorobenzene is heated to 135°C, the anomeric methoxy group at C-l 1 is eliminated to give intermediate 9 in 80% yield. After some careful experimentation, it was found that epoxy ketone 7 forms smoothly when enone 9 is treated with triphenyl-methyl hydroperoxide and benzyltrimethylammonium isopropoxide (see Scheme 4). In this reaction, the bulky oxidant adds across the more accessible convex face of the carbon framework defined by rings A, E, and F, and leads to the formation of 7 as the only stereoisomer in a yield of 72%. 

The results for the hydrolysis of chlorobenzene, o-chlorotoluene and p-chloroanisole in presence of cuprous oxide at different temperatures (Fig. 14) show a good selectivity for the reaction of the chlorobenzene. But, the p-chloroanisole is also transformed by a secondary demethylation reaction into the corresponding p-chlorophenolate. 

The influence of the copper catalyst ratio on the hydrolysis of arylhalide has been investigated on the chlorobenzene. The yield of the phenolate formation in these reaction conditions is depending on the initial molar ratio of the cuprous oxide to the starting chlorobenzene (Fig. 15). 

---