Chloroacetic chloride

SYNS CHLORACETYL CHLORIDE CHLORID KYSELINYCHLOROCTOVE CHLOROACETIC ACID CHLORIDE CHLOROACETIC CHLORIDE CHLORURE de CHLORACETYLE (FRENCH) iMONOCHLOROACETYL CHLORIDE... 

CHLOROACETIC CHLORIDE see CEC250 CHLOROACETONE see CDN200 CHLOROACETONE, stabilized pOT) see CDN200 2-CHLOROACETONITRILE see CDN500 CHLOROACETONITRILE pOT) see CDN500 a-CHLOROACETONITRILE see CDN500... 

CHLOROACETIC CHLORIDE (79-04-9) Forms corrosive vapors with air. Violent decomposition in water, producing chloroacetic acid and hydrogen chloride gas. Violent reaction with combustibles, alcohols, metal powders, sodium amide, many organic materials and compounds, causing toxic fumes and the danger of fire and explosion. Aqueous solution is incompatible with caustics, alkalis, alcohols, aliphatic amines, alkanolamines, ammonia, caustics, epichlorohydrin, isocyanates, alkylene oxides, sulfuric acid. 

Synonyms/Trade Names Chloroacetic acid chloride, Chloroacetic chloride, Monochloroacetyl chloride... 

As shown in Scheme 2.22, phenyl hydrazine reacted with urea to give phen-ylhydrazide M6. Condensation of M6 with formic acid followed by addition of concentrated sulfuric acid gave l-phenyl-3-hydroxy-1,2,4-triazole M6 which was converted to the sodium salt of l-phenyl-3-hydroxy-1,2,4-triazole M7. l-(Chloro-acetoxy)alkylphosphonates M3 were prepared from 0,0-diaIkyl 1-hydrox-yalkylphosphonate M2 and chloroacetic chloride in the presence of pyridine. IK-l-IK-7 in Table 2.52 could be obtained by the reaction of M7 with M3 in acetonitrile using tetrabutylammonium bromide as a catalyst. The systhestic procedures of M3 and M7 are introduced in the Sects. 9.1.4 and 9.1.8, respectively. 

Liu XF, He HW, Liu ZJ (1998) Reaction of 1-hydroxy alkyl phosphonate and chloroacetic chloride. J Centr Chin Norm Univ (Nat sci) 32 52-55... 

Conduct the preparation in the fume cupboard. Dissolve 250 g. of redistilled chloroacetic acid (Section 111,125) in 350 ml. of water contained in a 2 -5 litre round-bottomed flask. Warm the solution to about 50°, neutralise it by the cautious addition of 145 g. of anhydrous sodium carbonate in small portions cool the resulting solution to the laboratory temperature. Dissolve 150 g. of sodium cyanide powder (97-98 per cent. NaCN) in 375 ml. of water at 50-55°, cool to room temperature and add it to the sodium chloroacetate solution mix the solutions rapidly and cool in running water to prevent an appreciable rise in temperature. When all the sodium cyanide solution has been introduced, allow the temperature to rise when it reaches 95°, add 100 ml. of ice water and repeat the addition, if necessary, until the temperature no longer rises (1). Heat the solution on a water bath for an hour in order to complete the reaction. Cool the solution again to room temperature and slowly dis solve 120 g. of solid sodium hydroxide in it. Heat the solution on a water bath for 4 hours. Evolution of ammonia commences at 60-70° and becomes more vigorous as the temperature rises (2). Slowly add a solution of 300 g. of anhydrous calcium chloride in 900 ml. of water at 40° to the hot sodium malonate solution mix the solutions well after each addition. Allow the mixture to stand for 24 hours in order to convert the initial cheese-Uke precipitate of calcium malonate into a coarsely crystalline form. Decant the supernatant solution and wash the solid by decantation four times with 250 ml. portions of cold water. Filter at the pump. 

Girard s reagent T is carbohydrazidomethyltrimethylammonium chloride (I) and is prepared by the reaction of the quaternary ammonium salt formed from ethyl chloroacetate and trimethylamine with hydrazine hydrate in alco-hoUc solution ... 

The AC may react with methyl chloride or alpha-chloroacetic acid via a direct displacement reaction (eq. 2). The derivatives would be methyl cellulose or carboxymethyl cellulose. 

Chloroacetic acid can be esterified and aminated to provide useful chemical intermediates. Amphoteric agents suitable as shampoos have been synthesized by reaction of sodium chloroacetate with fatty amines (4,5). Reactions with amines (6) such as ammonia, methylamine, and trimethylamine yield glycine [66-40-6J, sarcosine [107-97-17, and carhoxymethyltrimethylammonium chloride, respectively. Reaction with aniline forms /V-phenylglycine [103-01 -5] a starting point for the synthesis of indigo (7). 

Manufacture. Most chloroacetic acid is produced by the chlorination of acetic acid using a suitable catalyst such as acetic anhydride (9—12). The remainder is produced by the hydrolysis of trichloroethylene with sulfuric acid (13,14) or by reaction of chloroacetyl chloride with water. 

Dichloroacetic acid is produced in the laboratory by the reaction of chloral hydrate [302-17-0] with sodium cyanide (31). It has been manufactured by the chlorination of acetic and chloroacetic acids (32), reduction of trichloroacetic acid (33), hydrolysis of pentachloroethane [76-01-7] (34), and hydrolysis of dichloroacetyl chloride. Due to similar boiling points, the separation of dichloroacetic acid from chloroacetic acid is not practical by conventional distillation. However, this separation has been accompHshed by the addition of a eotropeforming hydrocarbons such as bromoben2ene (35) or by distillation of the methyl or ethyl ester. 

Chloroacetyl chloride [79-04-9] (CICH2COCI) is the corresponding acid chloride of chloroacetic acid (see Acetyl chloride). Physical properties include mol wt 112.94, C2H2CI2O, mp —21.8 C, bp 106°C, vapor pressure 3.3 kPa (25 mm Hg) at 25°C, 12 kPa (90 mm Hg) at 50°C, and density 1.4202 g/mL and refractive index 1.4530, both at 20°C. Chloroacetyl chloride has a sharp, pungent, irritating odor. It is miscible with acetone and bensene and is initially insoluble in water. A slow reaction at the water—chloroactyl chloride interface, however, produces chloroacetic acid. When sufficient acid is formed to solubilize the two phases, a violent reaction forming chloroacetic acid and HCl occurs. 

Since chloroacetyl chloride can react with water in the skin or eyes to form chloroacetic acid, its toxicity parallels that of the parent acid. Chloroacetyl chloride can be absorbed through the skin in lethal amounts. The oral LD q for rats is between 120 and 250 mg/kg. Inhalation of 4 ppm causes respiratory distress. ATLV of 0.05 ppm is recommended (28,41). 

Chloroacetyl chloride is manufactured by reaction of chloroacetic acid with chlorinating agents such as phosphoms oxychloride, phosphoms trichloride, sulfuryl chloride, or phosgene (42—44). Various catalysts have been used to promote the reaction. Chloroacetyl chloride is also produced by chlorination of acetyl chloride (45—47), the oxidation of 1,1-dichloroethene (48,49), and the addition of chlorine to ketene (50,51). Dichloroacetyl and trichloroacetyl chloride are produced by oxidation of trichloroethylene or tetrachloroethylene, respectively. 

Much of the chloroacetyl chloride produced is used captively as a reactive intermediate. It is useful in many acylation reactions and in the production of adrenalin [51-43-4] diazepam [439-15-5] chloroacetophenone [532-27-4] chloroacetate esters, and chloroacetic anhydride [541-88-8]. A major use is in the production of chloroacetamide herbicides (3) such as alachlor [15972-60-8]. 

Chloroacetate esters are usually made by removing water from a mixture of chloroacetic acid and the corresponding alcohol. Reaction of alcohol with chloroacetyl chloride is an anhydrous process which Hberates HCl. Chloroacetic acid will react with olefins in the presence of a catalyst to yield chloroacetate esters. Dichloroacetic and trichloroacetic acid esters are also known. These esters are usehil in synthesis. They are more reactive than the parent acids. Ethyl chloroacetate can be converted to sodium fluoroacetate by reaction with potassium fluoride (see Fluorine compounds, organic). Both methyl and ethyl chloroacetate are used as agricultural and pharmaceutical intermediates, specialty solvents, flavors, and fragrances. Methyl chloroacetate and P ionone undergo a Dar2ens reaction to form an intermediate in the synthesis of Vitamin A. Reaction of methyl chloroacetate with ammonia produces chloroacetamide [79-07-2] C2H ClNO (53). 

Bromoacetic acid can be prepared by the bromination of acetic acid in the presence of acetic anhydride and a trace of pyridine (55), by the HeU-VoUiard-Zelinsky bromination cataly2ed by phosphoms, and by direct bromination of acetic acid at high temperatures or with hydrogen chloride as catalyst. Other methods of preparation include treatment of chloroacetic acid with hydrobromic acid at elevated temperatures (56), oxidation of ethylene bromide with Aiming nitric acid, hydrolysis of dibromovinyl ether, and air oxidation of bromoacetylene in ethanol. 

Carbon Monoxide Process. This process involves the insertion of carbon monoxide [630-08-0] into a chloroacetate. According to the hterature (34) in the first step ethyl chloroacetate [105-39-5] reacts with carbon monoxide in ethanol [64-17-5] in the presence of dicobalt octacarbonyl [15226-74-1], Co2(CO)g, at typical temperature of 100°C under a pressure of 1800 kPa (18 bars) and at pH 5.7. Upon completion of the reaction the sodium chloride formed is separated along with the catalyst. The ethanol, as well as the low boiling point components, is distilled and the nonconverted ethyl chloroacetate recovered through distillation in a further column. The cmde diethyl malonate obtained is further purified by redistillation. This process also apphes for dimethyl malonate and diisopropyl malonate. 

A wide variety of quaternaries can be prepared. Alkylation with benzyl chloride may produce quaternaries that are biologically active, namely, bactericides, germicides, or algaecides. Reaction of a tertiary amine with chloroacetic acid produces an amphoteric compound, a betaine. 

Production of cellulose esters from aromatic acids has not been commercialized because of unfavorable economics. These esters are usually prepared from highly reactive regenerated cellulose, and their physical properties do not differ markedly from cellulose esters prepared from the more readily available aHphatic acids. Benzoate esters have been prepared from regenerated cellulose with benzoyl chloride in pyridine—nitrobenzene (27) or benzene (28). These benzoate esters are soluble in common organic solvents such as acetone or chloroform. Benzoate esters, as well as the nitrochloro-, and methoxy-substituted benzoates, have been prepared from cellulose with the appropriate aromatic acid and chloroacetic anhydride as the impelling agent and magnesium perchlorate as the catalyst (29). 

Cellulose chloroacetates (30) and aminoacetates (30,31), acetate sorbates (32), and acetate maleates (33) have been prepared but are not commercially important. These esters are made from hydrolyzed cellulose acetate with the appropriate anhydride or acid chloride in pyridine. 

Glycine ethyl ester hydrochloride has been prepared by the action of absolute alcohol and hydrogen chloride on glycine from glycyl chloride and alcohol by the action of ammonia or hexamethylenetetramine on chloroacetic acid, and subsequent hydrolysis with alcoholic hydrochloric acid and by the action of hydrogen chloride and alcohol on methyleneamino-acetonitrile. ... 

Chlorine Chemistry Comicil (CCC), 270 Chlorine dioxide, 38 Chlorine trifluoride, 38 Chlomiephos, 38 Chlomiequat chloride, 38 Chloroacetaldhyde, 38 Chloroacetic acid, 38 2-Chloroacetophenone, 38 Chloroacetyl chloride, 38 Chloroanihnes, 39 Chlorobenzene, 39... 

This ester was designed as a protective group for the 2-position in glycosyl donors. It has the stability of the benzoate during glycosylation, but has the ease of removal of the chloroacetate. It is readily introduced through the acid chloride... 

The use of acid chlorides instead of acid anhydrides has also been described. Wittig and coworkers converted propiophenone 31 to chromone 32 in 50% yield with chloroacetyl chloride in the presence of sodium chloroacetate at 190 C. Despite the acid chloride s increased reactivity, a high temperature was still required. 

Acetic anhydride Sodium bicarbonate Hydrogen chloride Ethyl chloroacetate... 

A) Preparation of p-Acetylphenoxyacetic Acid p-Hydroxy-acetophenone is treated with chloroacetic acid in aqueous solution in the presence of sodium hydroxide. The desired acid is then isolated from its sodium salt in a total yield of 80 to 82%, excess of p-hydroxy-acetophenone having been extracted with methylene chloride. 

This material can be prepared, e.g, by reaction of prednisolone-21-chloroacetate in solvent with the sodium or potassium salt of the corresponding aliphatic or aromatic acid, or by reaction of prednisolone with the chloride of the corresponding acyl-glycolic acid, in the presence of a hydrochloric acid acceptor. 

Butyl alcohol in synthesis of phenyl 1-butyl ether, 46, 89 1-Butyl azidoacetate, 46, 47 hydrogenation of, 46, 47 1-Butyl chloroacetate, reaction with sodium azide, 46, 47 lre l-4-i-BUTYLCYCLOHEXANOL, 47,16 4-(-Butylcyclohexanonc, reduction with lithium aluminum hydride and aluminum chloride, 47, 17 1-Butyl hypochlorite, reaction with cy-clohexylamine, 46,17 l-Butylthiourea, 46, 72... 

Ethyl benzoylacetate has been prepared by the condensation (by means of sodium ethylate) of ethyl acetate with ethyl benzoate,1 acetophenone with ethyl carbonate,2 and acetophenone with ethyl oxalate, with subsequent heating 3 by treatment of ethyl phenylpropiolate4 or a-bromocinnamic acid 5 with concentrated sulfuric acid, and of ethyl diazoacetate with benzalde-hyde 6 by the condensation of benzene with the monoethyl ester of malonyl monoacid chloride and aluminum chloride,7 of benzoyl chloride with the product of the reaction of magnesium and ethyl chloroacetate in ether,8 of alcohol on benzoylacetimino ethyl... 

CH3CI 74-87-3) see Atropine methonitrate Clobazam Dimethyltubocurarinium chloride Methylmethionine sulfonium chloride Naproxen Suxamethonium chloride methyl chloroacetate... 

---