Chloride groups

Phthalocyanine sulfonic acids, which can be used as direct cotton dyes (1), are obtained by heating the metal phthalocyanines in oleum. One to four sulfo groups can be introduced in the 4-position by varying concentration, temperature, and reaction time (103). Sulfonyl chlorides, which are important intermediates, can be prepared from chlorosulfonic acid and phthalocyanines (104). The positions of the sulfonyl chloride groups are the same as those of the sulfonic acids (103). Other derivatives, eg, chlormethylphthalocyanines (105—107), / /f-butyl (108—111), amino (112), ethers (109,110,113—116), thioethers (117,118), carboxyl acids (119—122), esters (123), cyanides (112,124—127), and nitrocompounds (126), can be synthesized. 

In the presence of excess acid, a sulfonyl chloride group (—SO2CI) can be attached to an aromatic group, ie, chlorosulfonation can occur,... 

The distribution of chlorine atoms along the polymer chain has been studied in great detail. The distribution in various functional types is shown in Table 4 (18). High density polyethylene chlorosulfonated to 35% G1 and 1% S has been found to contain only 1.7% highly active chlorines, ie, reactive to weak bases. AH of these are attributed to the chlorine in the sulfonyl chloride group and those in beta position to SO2GI. No vicinal chlorides groups were found (19). 

The sulfonyl chloride group is the cure site for CSM and determines the rate and state of cure along with the compound recipe. It is less stable than the Cl groups and therefore often determines the ceiling temperature for processing. The optimum level of sulfonyl chloride to provide a balance of cured properties and processibiUty is about 2 mol % or 1—1.5 wt % sulfur at 35% Cl. It also undergoes normal acid chloride reactions with amines, alcohols, etc, to make useful derivatives (17). 

Early recommendations for cross-linking CSM involved the use of divalent metal oxides to form metal sulfonate cross-links (24). The mechanism involves the hydrolysis of the sulfonyl chloride group with a carboxyHc acid, ie, stearic acid, which produces water at curing temperatures. 

The best heat resistance is obtained when nickel dibutyldithiocarbamate [13927-77-0] (NBC) is incorporated into the compound. NBC contributes to the heat resistance by causing the elimination of unused sulfonyl chloride groups which are then unavailable for additional cross-linking during heat aging. The presence of large amounts of Htharge probably also result in some ionic cross-link formation. 

V,/V dipheny1ethy1enediamine. The cure mechanism probably involves an amine-catalyzed decomposition of the sulfonyl chloride group or a path of radical anions. The cross-link probably involves the HVA-2. Calcium hydroxide or other SO2 absorbers must be included for development of good mechanical properties. 

Several wide-porous affinity and size-exclusion chromatographic supports were prepared by Ivanov, Zubov et al. by means of acylation of aminopropyl-glass supports by copolymers of N-vinyl pyrrolidone (N-VP,1) and acryloyl chloride (AC,2), M = 7700 and 35000 respectively [50, 51]. The copolymers prepared by free radical copolymerization contain their units almost in equimolar proportion, with high tendency to alternation expected from the copolymerization parameters (rj = 0.035, r2 = 0.15 [52]). Residual carbonyl chloride groups of the chemisorbed copolymer could be transformed to 2-hydroxyethylamides which were solely... 

The syntheses of these initiators is described in Sect. II.C. According to detailed H1 NMR analysis hydrosilylation yielded 15-20% isomers along with the major products 1, 2, and 3 as shown in Figs. 1-3. The presence of the isomers, listed in Table 1, should not affect initiating efficiency by the benzyl chloride group, in view of the structure and virtually identical H1 NMR chemical shifts of the chloromethyl groups. 

Substitutions are very common synthetic reactions by their very nature they produce at least two products, one of which is commonly not wanted. As a simple example 2-chloro-2-methylpropane can be prepared in high yield by simply mixing 2-methylpropan-2-ol with concentrated hydrochloric acid (Scheme 1.10). Here the hydroxyl group on the alcohol is substituted by a chloride group in a facile SnI reaction. Whilst the byproduct in this particular reaction is only water it does reduce the atom economy to 83%. 

Boc-protection needed during reductive hydrogenation of the azide group to prevent reaction medium becoming basic Competitive de-chlorination of the aryl chloride group occurs under basic conditions... 

Rasmussen et al. (.15) on reactions of acid chloride groups on the surface of a polyethylene sheet with nucleophiles in aqueous solution, but because of the small number of reacting groups, highly sensitive spectroscopic techniques had to be used to follow the process. 

A correlation has been reported between the photooxidizability of several PVC samples and the number of long-chain ends in these polymers (45). The mechanistic significance of this result is rather uncertain, as the authors (45) do not state how the number of long-chain ends was varied. Nevertheless, it is perhaps worth noting that, in the absence of added chain-transfer agents, a major fraction of the long-chain ends should consist of allylic chloride groups (46,47). 

Chlorination of natural rubber, involving both addition and substitution (with some cyclization), yields a product with improved chemical and corrosion resistance. Chlorination of polyethylene in the presence of sulfur dioxide results in substituting both chloride and sulfonyl chloride groups into the polymer. A commercially useful material is one which contains about 12 chlorides and one sulfonyl chloride per 40-45 repeating units. This extensive substitution converts the polyethylene, a plastic, into an elastomer by destroying crystallinity. 

PLLA-fr-PCL) multiblock copolymers were prepared from the coupling reaction between the bischloroformates of carboxylated PLLA with diol-terminated PCL in the presence of pyridine [140]. LLA was polymerized with SnOCt2 and 1,6-hexanediol followed by the reaction with succinic anhydride to provide the dicarboxylated PLLA. The carboxyl end groups were subsequently transformed to acid chloride groups by the reaction with thionyl chloride (Scheme 65). As expected, the molecular weight distributions were broad for all samples (1.84 < Mw/Mn < 3.17). 

A sulfonyl chloride group rapidly reacts with amines in the pH range of 9-10 to form stable sulfonamide bonds. Under these conditions, it also may react with tyrosine —OH groups, aliphatic alcohols, thiols, and histidine side chains. Conjugates of sulfonyl chlorides with sulf-hydryls and imidazole rings are unstable, while esters formed with alcohols are subject to nucleophilic displacement (Nillson and Mosbach, 1984 Scouten and Van der Tweel, 1984). The only stable derivative with proteins therefore is the sulfonamide, formed by reaction with e-lysine... 

---