Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chiral stationary phases Metal

Gc chiral stationary phases can be broadly classified into three categories diamide, cyclodextrin, and metal complex. [Pg.70]

Although the chiral recognition mechanism of these cyclodexttin-based phases is not entirely understood, thermodynamic and column capacity studies indicate that the analytes may interact with the functionalized cyclodextrins by either associating with the outside or mouth of the cyclodextrin, or by forming a more traditional inclusion complex with the cyclodextrin (122). As in the case of the metal-complex chiral stationary phase, configuration assignment is generally not possible in the absence of pure chiral standards. [Pg.71]

Chiral Chromatography. Chiral chromatography is used for the analysis of enantiomers, most useful for separations of pharmaceuticals and biochemical compounds (see Biopolymers, analytical techniques). There are several types of chiral stationary phases those that use attractive interactions, metal ligands, inclusion complexes, and protein complexes. The separation of optical isomers has important ramifications, especially in biochemistry and pharmaceutical chemistry, where one form of a compound may be bioactive and the other inactive, inhibitory, or toxic. [Pg.110]

Complexation with Chiral Metal Complexes. This idea was first suggested by Feibush et al.44 The separation is realized by the dynamic formation of diastereomeric complexes between gaseous chiral molecules and the chiral stationary phase in the coordination sphere of metal complexes. A few typical examples of metal complexes used in chiral stationary phase chromatography are presented in Figure 1-13.45... [Pg.27]

Analysis using a CMPA is usually resolved on a nonchiral column. A transient diastereomeric complex is formed between the enantiomer and the chiral component in the mobile phase, similar to the complexes formed with chiral stationary phases. A review by Liu and Liu (2002) cites several papers where addition of CPMAs has been used in analyzing amphetamine-related compounds. Some CPMAs include amino acid enantiomers, metal ions, proteins, and cyclodextrins. Advantages of this method of analysis include the use of less expensive columns and more flexibility in the optimization of chiral separation (Misl anova and Hutta, 2003). [Pg.25]

Ligand exchange chromatography is a very powerful method for separating enantiomers. However, it is limited to enantiomeric compounds that are able to undergo metal complexes with the chiral stationary phase such as amino acids, amino acid derivatives, and amino alcohols. [Pg.1031]

Measurement of underivatized propranolol enantiomers in serum using a celluIose-tris(3,5-dimethylphenylcarbamate) high performance liquid chromatographic (HPLC) chiral stationary phase" (54). A method for the direct measurement of the enantiomers of propranolol in human serum was developed using the OD CSP and a mobile phase composed of hexane 2-propranol W,W-dimethyloctylamine (92 8 0.01, v/v/ v). The assay was validated for use in pharmacokinetic and metabolic studies and was subsequently used in the investigation of the effect of cimetidine on the metallism and clearance of propranolol enantiomers (60). [Pg.153]

The use of chiral stationary phases (CSP) in liquid chromatography continues to grow at an impressive rate. These CSPs contain natural materials such as cellulose and starch as well as totally synthetic materials, utilizing enantioselective and retentive mechanisms ranging from inclusion complexation to Ti-electron interactions. The major structural features found in chiral stationary phases include cellulose, starch, cyclodextrins, synthetic polymers, proteins, crown ethers, metal complexes, and aromatic w-electron systems. [Pg.2159]

Compared to CMP, the mechanism of separation on a chiral stationary phase is easier to predict, due to a much simpler system. Because the ligand is immobilized to a matrix and is not constantly pumped through the system, the detection limits for the enantiomers are much lower. Depending on the ligand immobilized to the matrix, one can have different types of interactions between the selectand and selector metal complexes, hydrogen-bonding, inclusion, tt-tt interactions, and dipole interactions, as well as a combination thereof. [Pg.373]

Chiral hgand exchange chromatography can be performed either on an achiral stationary phase with a chiral mobile phase or on a chiral stationary phase IMAC is performed on the metal ion immobihzed stationary phase. The latter two stationary phases may be symbohzed by the same formula as... [Pg.1339]

Polycarboxylate crown ethers such as (205) are suitable ligands for potentiometric studies of mixed-metal complexes of Al3+ and alkali or alkaline-earth cations.303 A similar (+)-18-crown-6-tetracarboxylic acid, chemically immobilized on a chiral stationary phase (CSP), can selectively recognize both enantiomers of some analytes.304 Calixarene polycarboxylates such as (206) and (207) are useful ligands toward alkali-305,306 and also transition-metal ions,307 308 with applications in... [Pg.245]

A chiral stationary phase is used comprising a silica substrate on which is fixed an amino acid. The mechanisms developed are of the "ligand exchange" type. The distinction between two enantiomers is possible due to the formation of mixed diastereoisomerical complexes (chiral solute - transition metal - amino acid fixed on the silica substrate). The transition metal is added to the mobile phase. (Fig. 4)... [Pg.539]

Although packed columns have been used in earlier studies, capillary columns containing wall-coated or immobilized chiral selectors are more widely used at present. The chiral selector may be of different nature, such as amino acid derivatives, chiral metal complexes, etc. [90], At present, cyclodextrins (CD) and their derivatives dominate as chiral stationary phases (CSP) in GC enantioseparations [90, 91], CD-based CSPs for GC are thermally stable, widely applicable, and easy to use. [Pg.147]

Figure 10.4. Structures of immobilized poly(siloxane) chiral stationary phases containing (A) a cyclodextrin derivative (Chirasil-Dex) and (B) a metal complex (Chirasil-Nickel). Figure 10.4. Structures of immobilized poly(siloxane) chiral stationary phases containing (A) a cyclodextrin derivative (Chirasil-Dex) and (B) a metal complex (Chirasil-Nickel).
Chiral Stationary Phases for Gas Chromatography Small Molecule Stationary Phases Chiral Polysiloxane Stationary Phases Chiral Metal Chelating Stationary Phases Cyclodextrin Chiral Stationary Phases... [Pg.543]


See other pages where Chiral stationary phases Metal is mentioned: [Pg.169]    [Pg.181]    [Pg.121]    [Pg.410]    [Pg.182]    [Pg.190]    [Pg.267]    [Pg.703]    [Pg.710]    [Pg.711]    [Pg.101]    [Pg.102]    [Pg.2159]    [Pg.213]    [Pg.161]    [Pg.412]    [Pg.212]    [Pg.180]    [Pg.356]    [Pg.121]    [Pg.1]    [Pg.3]    [Pg.293]    [Pg.3210]   
See also in sourсe #XX -- [ Pg.833 ]




SEARCH



Chiral metal

Chiral phases

Chiral stationary phases

Chiral stationary phases metal complexes

Chirality/Chiral phases

Metal phases

Metallic phase

Phases chirality

© 2024 chempedia.info