Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chiral catalysts Michael addition

Addition of p-tert-butylthiophenol 178 to the racemic furanone 168 in dry toluene, and in the presence of quinidine as a chiral catalyst, provided (/ )-168 together with the Michael adduct 179. The enantiomeric excess of the recovered furanone (R)-168 was determined via the addition of (/)-Q -methylbenzylamine This amine addition showed complete diastereofacial control to give the adduct 180 in quantitative yield (Scheme 50) (94T4775). [Pg.137]

Table 6. Michael Addition of Carbonyl Compounds to Enones and Enoates with Crown Ethers or Quaternary Salts as Chiral Catalysts Crown Ethers ... Table 6. Michael Addition of Carbonyl Compounds to Enones and Enoates with Crown Ethers or Quaternary Salts as Chiral Catalysts Crown Ethers ...
Various chiral auxiliaries and catalysts have been developed that allow diastereoface-and enantioface-selective Michael additions. [Pg.954]

This finding is also in agreement with another three-component Michael/aldol addition reaction reported by Shibasaki and coworkers [14]. Here, as a catalyst the chiral AlLibis[(S)-binaphthoxide] complex (ALB) (2-37) was used. Such hetero-bimetallic compounds show both Bronsted basicity and Lewis acidity, and can catalyze aldol [15] and Michael/aldol [14, 16] processes. Reaction of cyclopentenone 2-29b, aldehyde 2-35, and dibenzyl methylmalonate (2-36) at r.t. in the presence of 5 mol% of 2-37 led to 3-hydroxy ketones 2-38 as a mixture of diastereomers in 84% yield. Transformation of 2-38 by a mesylation/elimination sequence afforded 2-39 with 92 % ee recrystallization gave enantiopure 2-39, which was used in the synthesis of ll-deoxy-PGFla (2-40) (Scheme 2.8). The transition states 2-41 and 2-42 illustrate the stereochemical result (Scheme 2.9). The coordination of the enone to the aluminum not only results in its activation, but also fixes its position for the Michael addition, as demonstrated in TS-2-41. It is of importance that the following aldol reaction of 2-42 is faster than a protonation of the enolate moiety. [Pg.53]

The asymmetric Michael addition of 1,3-dicarbonyl compounds to nitrostyrene is promoted by chiral alkaloid catalysts to give the addition products in good chemical yield, but the enantioselectivity is rather low (Eq. 4.47).62... [Pg.86]

Catalytic enantioselective nucleophilic addition of nitroalkanes to electron-deficient alke-nes is a challenging area in organic synthesis. The use of cinchona alkaloids as chiral catalysts has been studied for many years. Asymmetric induction in the Michael addition of nitroalkanes to enones has been carried out with various chiral bases. Wynberg and coworkers have used various alkaloids and their derivatives, but the enantiomeric excess (ee) is generally low (up to 20%).199 The Michael addition of methyl vinyl ketone to 2-nitrocycloalkanes catalyzed by the cinchona alkaloid cinchonine affords adducts in high yields in up to 60% ee (Eq. 4.137).200... [Pg.118]

Chiral monoaza-crown ethers containing glucose units have been applied as phase-transfer catalysts in the Michael addition of 2-nitropropane to a chalcone to give the corresponding adduct in up to 90% ee. (Eq. 4.138).202... [Pg.118]

Annual Volume 71 contains 30 checked and edited experimental procedures that illustrate important new synthetic methods or describe the preparation of particularly useful chemicals. This compilation begins with procedures exemplifying three important methods for preparing enantiomerically pure substances by asymmetric catalysis. The preparation of (R)-(-)-METHYL 3-HYDROXYBUTANOATE details the convenient preparation of a BINAP-ruthenium catalyst that is broadly useful for the asymmetric reduction of p-ketoesters. Catalysis of the carbonyl ene reaction by a chiral Lewis acid, in this case a binapthol-derived titanium catalyst, is illustrated in the preparation of METHYL (2R)-2-HYDROXY-4-PHENYL-4-PENTENOATE. The enantiomerically pure diamines, (1 R,2R)-(+)- AND (1S,2S)-(-)-1,2-DIPHENYL-1,2-ETHYLENEDIAMINE, are useful for a variety of asymmetric transformations hydrogenations, Michael additions, osmylations, epoxidations, allylations, aldol condensations and Diels-Alder reactions. Promotion of the Diels-Alder reaction with a diaminoalane derived from the (S,S)-diamine is demonstrated in the synthesis of (1S,endo)-3-(BICYCLO[2.2.1]HEPT-5-EN-2-YLCARBONYL)-2-OXAZOLIDINONE. [Pg.266]

Some chiral quaternary ammonium salts are also effective in Michael addition reactions. The Merck catalysts 7 (R=4-CF3, X=Br) and 9 (R=4-CF3, X=Br, 10,11-dihydro) were used tor the Michael additions of 59,61, and 64 to vinyl ketones to give the adducts 60,62, and 65 (isolated as 66), respectively,148,491 with excellent enantioselectivity, as shown in Scheme 19. The Michael addition of the O Donnell imine 23 to the a,(3-unsaturated carbonyl compounds also efficiently proceeded by use of the N-anthracenyl-methyl catalyst 12 (R=allyl, X=Br), giving the Michael adducts 67 (Scheme 20).1251... [Pg.134]

S. Aoki, S. Sasaki, K. Koga, Simple Chiral Crown Ethers Complexed with Potassium tert>Butoxide as Efficient Catalysts for Asymmetric Michael Additions , Tetrahedron Lett. 1989, 30, 7229-7230. [Pg.142]

P. Bako, T. Kiss, L. Toke, Chiral Azacrown Ethers derived from D-Glucose as Catalysts for Enantioselective Michael Addition , Tetrahedron Lett. 1997, 38, 7259-7262. [Pg.142]

The regio- and diastereo-selectivity of the Michael addition of 2-phenylcyclo-hexanone with a,p-unsaturated ketones are dependent on the reaction conditions. Mixtures of all six diastereoisomers resulting from reaction at either the 2- or 6-position of the cyclohexanone ring can be obtained using solid potassium hydroxide with tetra-n-butylammonium or A-benzylephcdrinium bromide catalysts. At 20°C with tetra-n-butylammonium bromide, the ratio of the 2,2- and 2,6-disubstituted cyclohexanones is ca. 3 2, but at higher temperatures with solid potassium f-butoxide the kinetically formed 2,6-isomer predominates (ca. 5 1) with the (2S,6R, R )-stereoisomer dominant, whereas greater amounts of the thermodynamically preferred 2,2-(2S,lR )-isomer are obtained with the chiral catalyst [61]. [Pg.530]

Chiral, Lewis acidic bisoxazoline complexes of Mg(II) have been employed as catalysts in asymmetric Michael addition of O-benzyUiydroxylamine to unsaturated amides, (115) -> (116). The enantioselectivity (67-90% ee) was rationalized by transition state (117). This approach constimtes a promising methodology for the synthesis of jS-amino acids. °... [Pg.438]

Dicarbonyl compounds are widely used in organic synthesis as activated nucleophiles. Because of the relatively high acidity of the methylenic C—H of 1,3-dicarbonyl compounds, most reactions involving 1,3-dicarbonyl compounds are considered to be nucleophilic additions or substitutions of enolates. However, some experimental evidence showed that 1,3-dicarbonyl compounds could react via C—H activations. Although this concept is still controversial, it opens a novel idea to consider the reactions of activated C H bonds. The chiral bifunctional Ru catalysts were used in enantioselective C C bonds formation by Michael addition of 1,3-dicarbonyl compounds with high yields and enantiomeric excesses. ... [Pg.140]

When nitroalkenes were used as Michael acceptors, high yields and enantioselectivities of the desired Michael addition products were also obtained (Scheme 5.22). In these reactions, a well-defined chiral Ru amido complex (Figure 5.9) was an efficient catalyst. The mild reaction conditions and high reactivities and stereoselectivities allowed a large-scale reaction in the presence 1 mol% Ru catalyst. By using a chiral Pd(II) catalyst, an asymmetric allylic arylation was reported by Mikami and coworkers to give the cross-couphng product via the activation of both allylic C H and aryl C H bonds in moderate enantioselectivity (Scheme 5.23). ... [Pg.141]

For an example of asymmetric Michael addition using a chiral diamine-dipeptide catalyst, see Tsogoeva, S. B. Jagtap, S. B. Synlett 2004, 2624—2626. [Pg.354]

Following work on Michael addition of triazoles to nitro-olefins (discussed in Sect. 2.5), bifunctional chiral thiourea catalysts were used in the addition of triazoles to chalcones [83]. The catalytic system was applicable to enones bearing aromatic groups of varying electronic natures to provide good yields and moderate selectivity. a-Cyanoacetates [84] were also applied in Michael addition to chalcones under similar catalytic conditions (Scheme 33). [Pg.170]

Chen and co-workers utilized the chiral bifunctional catalysts to directly access vinylogous carbon-carbon bonds via the asymmetric Michael addition of a,a-dicy-ano-olefms to nitro-olefms [102]. The scope of the reaction was explored with a variety of substituted a,a-dicyano-olefins and P-substituted nitro-olefms (Scheme 50). The authors propose the catalysf s tertiary amine functionality depro-tonates the cyano-olefm, activating the nucleophile to add to the -face of the pre-coordinated nitro-olefm. [Pg.179]

Another structurally modified guanidine was reported by Ishikawa et al. as a chiral superbase for asymmetric silylation of secondary alcohols [122]. Soon after, Ishikawa discovered that the same catalyst promoted asymmetric Michael additions of glycine imines to acrylates [123]. The additions were promoted in good yield and great asymmetric induction under neat reaction conditions with guanidine catalyst 250 (Scheme 68). The authors deduced that the high conversion and selectivity were due to the relative configuration of the three chiral centers of the catalyst in... [Pg.189]

Application of this work to a domino process using 51 involves Michael addition of P-ketoesters [91], p-diketones or P-ketosulfones [92] to a,P-unsaturated ketones followed by an intramolecular aldol reaction provides highly functionalised cyclohexanone building blocks with up to four contiguous chiral centres. Gryko has also reported examples of this domino Michael/intramolecular aldol reaction in the coupling of 1,3-diketones and methyl vinyl ketone using L-proUne as catalyst [93],... [Pg.300]

Furthermore, to clarify the difference between task specific ionic hquids (or also called functionahzed ionic hquids) and chiral ionic hquids, one very successful example of a task specific ionic hquid 63 is presented in Scheme 65. This catalyst with a loading of 15 mol% under neat conditions gave up to 100% yield and 99% ee in the Michael addition of cyclohexanones to nitroolefms [179]. This catalyst belongs to the field of the prohne catalyzed reactions. [Pg.379]

A chiral phase transfer catalyst was dissolved in ionic liquid media for the enantioselective Michael reaction of dimethyl malonate with l,3-diphenylprop-2-en-l-one with K2CO3 203). The phase-transfer catalyst was a chiral quininium bromide (Scheme 20). The reaction proceeded rapidly with good yield and good enantioselectivity at room temperature in all three ionic liquids investigated, [BMIM]PF6, [BMIM]BF4 and [BPy]BF4. In the asymmetric Michael addition, the enantioselectivity or the reaction in [BPy]Bp4 was the same as in conventional organic solvents. [Pg.203]

The modification of thiourea catalyst 93 through incorporation of the (S,S)-diaminocyclohexane backbone as an additional chirality element and a Schiff base imidazoyl-moiety led to the bifunctional catalyst 94 that, in contrast to 93 in the Strecker reaction (Scheme 6.99), exhibited enantioinduction (83-87% ee) in the nitro-Michael addition of acetone to trons-P-nitrostyrenes. The desired adducts were isolated in moderate yields (46-62%) as depicted in Scheme 6.100) [259]. [Pg.244]

The Jacobsen group independently focussed on the development of primary amine-functionalized thiourea derivatives and published, in 2006, the thioureas 100-103 incorporating the established tert-leucine (amide) motif (Figure 6.14) and the diaminocyclohexane or diphenylethylenediamine chiral backbone, respectively (Figure 6.31) [262]. The catalyst screening was carried out in the asymmetric Michael addition [149-152] of 2-phenylpropionaldehyde, an a,a-disubstituted aldehyde, to 1-nitrohex-l-ene (at 20mol% loading, DCM, rt, variable equiv. of H2O)... [Pg.245]


See other pages where Chiral catalysts Michael addition is mentioned: [Pg.1106]    [Pg.369]    [Pg.911]    [Pg.987]    [Pg.135]    [Pg.171]    [Pg.144]    [Pg.156]    [Pg.207]    [Pg.489]    [Pg.926]    [Pg.519]    [Pg.530]    [Pg.69]    [Pg.79]    [Pg.329]    [Pg.337]    [Pg.384]    [Pg.173]    [Pg.236]    [Pg.255]    [Pg.272]   
See also in sourсe #XX -- [ Pg.118 ]




SEARCH



Catalyst additives

Chiral additives

Chiral catalysts

© 2024 chempedia.info