Carbonylation under phase-transfer conditions

In the carbonylation of allyl halides the highly toxic [Ni(CO)4] catalyst could be replaced by [Ni(CN)2], which yielded [Ni(CN)(CO)jr under the reaction conditions [17]. The cyanotricarbonylnickel(0) anion is a versatile catalyst of carbonylations under phase transfer conditions [18], however, hydroxycarbonylation of allyl chloride proceeds effectively without PT catalysts in a genuine biphasic system, as well. 

Racemic a-phenylethyl bromide is carbonylated under phase-transfer conditions with 5 N NaOH and dichloromethane containing bis-(dibenzylideneacetone)Pd(O) and a chiral 2-substituted 3,1,2-oxaza-phospholane to give a-phenylpropionic acid in moderate ee (Scheme 83) (196). The reaction involves kinetic resolution of the bromide with a discriminative slow oxidative addition step. 

Alkylidynetricobalt nonacarbonyl complexes are an interesting class of clusters (78). They can be synthesized by treatment of a tri- or tetrahaloal-kane with cobalt carbonyl under phase-transfer conditions [e.g., 71] (28). Partially or completely dehalogenated by-products were often isolated from these reactions. 

Naphthaleneacetic acid has also been prepared by the carbonyl-insertion reaction of 1-chloromethylnaphthalene cataly2ed by carbonyl cobalt cation (90,91). Carboxylation of 1-chloromethylnaphthalene in the presence of the catalyst Pd[P(CgH )2]2Cl2 under phase-transfer conditions gave 1-naphthaleneacetic acid in 78% yield (92). 

It is well known that aziridination with allylic ylides is difficult, due to the low reactivity of imines - relative to carbonyl compounds - towards ylide attack, although imines do react with highly reactive sulfur ylides such as Me2S+-CH2-. Dai and coworkers found aziridination with allylic ylides to be possible when the activated imines 22 were treated with allylic sulfonium salts 23 under phase-transfer conditions (Scheme 2.8) [15]. Although the stereoselectivities of the reaction were low, this was the first example of efficient preparation of vinylaziridines by an ylide route. Similar results were obtained with use of arsonium or telluronium salts [16]. The stereoselectivity of aziridination was improved by use of imines activated by a phosphinoyl group [17]. The same group also reported a catalytic sulfonium ylide-mediated aziridination to produce (2-phenylvinyl)aziridines, by treatment of arylsulfonylimines with cinnamyl bromide in the presence of solid K2C03 and catalytic dimethyl sulfide in MeCN [18]. Recently, the synthesis of 3-alkyl-2-vinyl-aziridines by extension of Dai s work was reported [19]. 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

Generally, in the nucleophilic addition to carbonyl groups, either magnesium compounds or alkali metal compounds (such as the Li, Na and K derivatives) are used. In some cases even potassium carbonate or piperidine were used as the base for condensation with sulfones. Good results were obtained when concentrated aqueous NaOH was used under phase-transfer conditions . ... 

Pt-catalyzed hydration of various aliphatic and aromatic alkynes under phase transfer conditions in (CH2C1)2/H20 in the presence of Aliquat 336 led to either a Markovnikov product, mixtures of two ketones, or ketones with the carbonyl group positioned away from the bulky side.72 In the absence of the phase transfer reagent, Aliquat 336, hardly any reaction took place. Recently, a hydrophobic, low-loading and alkylated polystyrene-supported sulfonic acid (LL-ALPS-SO3H) has also been developed for the hydration of terminal alkynes in pure water, leading to ketones as the product.73 Under microwave irradiation, the hydration of terminal arylalkynes was reported to proceed in superheated water (200°C) without any catalysts.74... 

Nickel-catalyzed carbonylation of a-haloalkynes with carbon monoxide under phase-transfer conditions gave either allenic monoacids or unsaturated diacids.93 The carbonylation initially afforded monoacids, which reacted further to give diacids with high stereoselectivity (Eq. 4.52). 

Nickel-catalyzed carbonylation of a-ketoalkynes has also been reported by Arzoumanian et al. under phase-transfer conditions.94 The carbonylation gave either furanone or unsaturated carboxylic acids depending on the substituents of substrates (Eq. 4.53). A similar reaction, nickel-catalyzed cyanation of a-ketoalkynes with KCN in water, was also reported to afford unsaturated hydroxylactams (Eq. 4.54).95... 

Ironcarbonyl induces a similar reductive carbonylation of 150 with sodium methoxide [85], A catalytic cycle is formed by using CoCl2 and Ni(CN)2 as catalysts under phase-transfer conditions [86]. 

Propargyl halides [56] and propargyl acetates [57] have also been employed for Pd-catalyzed carbonylation (Scheme 3.22). From the latter substrates, allenylcarboxylic acids were obtained under phase-transfer conditions (with nBu4NBr in aqueous NaOH and 4-methyl-2-pentanone) [56],... 

Although the acylcobalt tetracarbonyls react with hydroxide ion under phase-transfer conditions, in the presence of alkenes and alkynes they form o-adducts rapidly via an initial interaction with the ir-electron system. Subsequent extrusion of the organometallic group as the cobalt tetracarbonyl anion leads to a,(J-unsaturated ketones (see Section 8.4). In contrast, the cobalt carbonyl catalysed reaction of phenylethyne in the presence of iodomethane forms the hydroxybut-2-enolide (5) in... 

The selective 1,4-reduction of a,p-unsaturated carbonyl compounds is always a challenge, but it has been met successfully by the use of dithionite under phase-transfer conditions. Reduction proceeds in high yield to the total exclusion of saturated or allylic alcohols (Table 11.10) [5, 6], Exocyclic and endocyclic conjugated C=C double bonds are reduced with equal ease, whereas non-conjugated double bonds remain intact. The predominant reduction pathway for conjugated dienoic... 

Desulphurization of thiols has been accomplished in high yield under phase-transfer conditions using tri-iron dodecacarbonyl (or dicobalt octacarbonyl). The mechanism proposed for the formation of the alkanes and the dialkyl sulphide byproducts involves a one electron transfer to the thiol from the initially formed quaternary ammonium hydridoiron polycarbonyl ion pair [14], Similar one electron transfers have been postulated for the key step in the cobalt carbonyl promoted reactions, which tend to give slightly higher yields of the alkanes (Table 11.18). 

Complexes of other metals are also capable of catalyzing useful carbonylation reactions under phase transfer conditions. For example, certain palladium(o) catalysts, like Co2(C0)g, can catalyze the carbonylation of benzylic halides to carboxylic acids. When applied to vinylic dibromides, unsaturated diacids or diynes were obtained, using Pd(diphos)2[diphos l,2-bis(diphenylphosphino)ethane] as the metal catalyst, benzyltriethylammonium chloride as the phase transfer agent, and t-amyl alcohol or benzene as the organic phase(18),... 

Isomerization of allylic alcoholsAllylic alcohols can be isomerized to carbonyl compounds by several organometallic reagents at elevated temperatures. The reaction can be conducted at 25-30° overnight with [Rh(CO)2Cll2 under phase-transfer conditions. Cleaner reactions obtain if benzyltriethylammonium chloride is used as catalyst. 

With these reagents [296] alkylation could be obtained under phase transfer conditions. Cleavage of the alkylated product to yield a carbonyl compound was performed under neutral conditions by photolysis in the presence of water. 

In a similar process, nickel compounds also catalyze the carbonylation of allenyl halides, under phase-transfer conditions (PTC), to give allenyl acids in poor to reasonably good yields (equation 94)368. 

Rozwadowska and coworkers carried out the asymmetric alkylation of isoquino-line Reissert compounds under phase-transfer conditions using cinchonine-derived quaternary ammonium salts as catalysts. The best enantioselectivity was achieved in the benzylation and allylation of 1 -cyano-2-phenoxy carbonyl-1,2-dihydroisoquinoline (17) catalyzed by 2a (Scheme 2.14) [34]. 

Carbonylation of CH2=CHX and halodienes.1 Ni(CN)2 is an active catalyst for carbonylation of unsaturated halides under phase-transfer conditions. The effective species is probably a cyanotricarbonylnickelate. Thus in the presence of cetyltri-... 

Table 4.6 Catalytic enantioselective Michael addition of 28 to a,/ -unsaturated carbonyl compounds under phase-transfer conditions. (For experimental details see Chapter 14.9.11).

Carbonylation of benzyl chloride This reaction can be effected with cobalt carbonyl or a palladium(O) catalyst under phase-transfer conditions. CeCl3 promotes this phase-transfer process and also permits the use of nickel(II) cyanide as the... 

The effectiveness in carbonylations of Ni(CO)4 is well documented, as well as its toxicity. Substitutes for this catalyst are therefore of much interest, and [Ni(CN)(CO)J], generated in situ from Ni(CN)2, CO and aqueous NaOH under phase transfer conditions, fulfills this role in many cases394. Under these conditions (1 atm CO), several types of organic halides are carbonylated, including allyl halides394, benzyl chlorides (with lanthanide salts)395, aryl iodides396, vinyl bromides397 and dibromocyclopropanes (equation 199)398. 

In the presence of alkyl halides and base, alkyltetracarbonylcobalt complexes are formed with Co2(CO)8 these species [RCo(CO)4] carbonylate a wide range of aryl halides or heterocyclic halides to various products, which depend upon the specific conditions. In the presence of alcohols, carboxylic esters are formed. Under phase transfer conditions and with iodomethane, mixtures of methyl ketone and carboxylic acid formation are realized (equation 207). In the presence of sodium sulfide or NaBH4 in water-Ca(OH)2 (equation 208) good amounts of double carbonylation are realized under very mild conditions412-414. 

Carbonylation with iron carbonyls parallels that of cobalt carbonyls. Benzylic chlorides and bromides are carbonylated with Fe(CO)5 in the presence of base. Esters are realized when carbonylation is performed in alcohols under 1 atm of CO with catalytic amounts of iron pentacarbonyl415. Under phase transfer conditions, two predominant routes are available. With catalytic amounts of iron under a CO atmosphere and strongly basic conditions, the carboxylic acids are realized in reasonable yields415,416, whereas mild bases [Ca(OH)2l, stoichiometric amounts of iron carbonyl and the omission of CO give dibenzyl ketones417. In at least a few cases, it is possible to prepare unsymmetrical methyl benzyl ketones418, des Abbayes and coworkers have observed the formation of acyltetracarbonyl anion (52) under the reaction conditions, and have proposed the catalytic cycle in Scheme 8 for the ketone formation418. 

Alcohols can be dehydrogenated to carbonyl compounds by exposure to a catalytic amount of a rhodium(I) complex under phase-transfer conditions. This reaction is particularly useful for benzylic alcohols such as 1-phenylethanol (50) which gave acetophenone (51) in 78% yield using chlorodicarbonylrhodium(I) dimer as the metal catalyst and benzyltrieth-ylammonium chloride or Aliquat 336 as the phase-transfer catalyst (52). 

Table 3.5 Oxidation of alcohols to the corresponding carbonyl compounds with hydrogen peroxide catalysed by Mo(VI) or W(VI) complexes under phase-transfer conditions at 70°C ...

---