Carbonylation of palladium

For example, the results in Table 3 suggest that binary carbonyls of copper, silver and gold which have been detected spectrometrically in matrices at very low temperatures27, contain metal-CO bonds which are approximately of the same strength as those in Mn2(CO)i0. Similar considerations apply to carbonyls of palladium and platinum which have also been detected by matrix isolation spectrometry28. All of these binary compounds are unstable with respect to [M(c) + CO(g)J at room temperature. 

E. P. Kundig, M. Moskovits, and G. A. Ozin, Intermediate Binary Carbonyls of Palladium Pd(CO)n where n = 1-3 Preparation, Identification, and Diffusion Kinetics by Matrix Isolation Infrared Spectroscopy, Canad. J. Chem. 50, 3587-3593 (1972). 

Oxidative Carbonylation of Ethylene—Elimination of Alcohol from p-Alkoxypropionates. Spectacular progress in the 1970s led to the rapid development of organotransition-metal chemistry, particularly to catalyze olefin reactions (93,94). A number of patents have been issued (28,95—97) for the oxidative carbonylation of ethylene to provide acryUc acid and esters. The procedure is based on the palladium catalyzed carbonylation of ethylene in the Hquid phase at temperatures of 50—200°C. Esters are formed when alcohols are included. Anhydrous conditions are desirable to minimize the formation of by-products including acetaldehyde and carbon dioxide (see Acetaldehyde). 

With hydrogen sulfide at 500—600°C, monochlorotoluenes form the corresponding thiophenol derivatives (30). In the presence of palladium catalysts and carbon monoxide, monochlorotoluenes undergo carbonylation at 150—300°C and 0.1—20 MPa (1—200 atm) to give carboxyHc acids (31). Oxidative coupling of -chlorotoluene to form 4,4 -dimethylbiphenyl can be achieved in the presence of an organonickel catalyst, generated in situ, and zinc in dipolar aprotic solvents such as dimethyl acetamide (32,33). An example is shown in equation 4. 

The oxidative carbonylation of styrene with carbon monoxide, oxygen, and an aUphatic alcohol in the presence of a palladium salt, a copper salt, and sodium propionate also provides the requisite cinnamate. 

Reduction of unsaturated carbonyl compounds to the saturated carbonyl is achieved readily and in high yield. Over palladium the reduction will come to a near halt except under vigorous conditions (73). If an aryl carbonyl compound, or a vinylogous aryl carbonyl, such as in cinnamaldehyde is employed, some reduction of the carbonyl may occur as well. Carbonyl reduction can be diminished or stopped completely by addition of small amounts of potassium acetate (i5) to palladium catalysts. Other effective inhibitors are ferrous salts, such asferroussulfate, at a level of about one atom of iron per atom of palladium. The ferrous salt can be simply added to the hydrogenation solution (94). Homogeneous catalysts are not very effective in hydrogenation of unsaturated aldehydes because of the tendencies of these catalysts to promote decarbonylation. 

A variety of catalysts including copper, nickel, cobalt, and the platinum metals group have been used successfully in carbonyl reduction. Palladium, an excellent catalyst for hydrogenation of aromatic carbonyls is relatively ineffective for aliphatic carbonyls this latter group has a low strength of adsorption on palladium relative to other metals (72,91). Nonetheless, palladium can be used very well with aliphatic carbonyls with sufficient patience, as illustrated by the difficult-to-reduce vinylogous amide I to 2 (9). 

Hydrogenation of carbonyls, or incipient carbonyls such as phenols (86), in lower alcohol solvents may result in the formation of ethers. The ether arises through formation of acetals or ketals with subsequent hydrogenolysis. The reaction has been made the basis of certain ether syntheses (45,97). Reaction of alcohols with carbonyls may be promoted by trace contamination, such as iron in platinum oxide (22,53), but it is also a property of the hydrogenation catalyst itself. So strong is the tendency of palladium-hydrogen to promote acetal formation that acetals may form even in basic media (61). 

Dihydrouracils (27) can be obtained in one step by a palladium-catalyzed carbonylation of (28). The key intermediate is believed to be 2-trifluoro-methylpropenoyl palladium (82TL4099). 

In 1991, Ohfune and coworkers reported palladium(O)-catalyzed carbonylation of vinylaziridines 262 with carbon monoxide (1 atm.) in benzene (Scheme 2.65) [31]. Interestingly, 3,4-trans-azetidinone 264 was exclusively obtained from a dia-stereomeric mixture of trans- and cis-vinylaziridines 262 (3 1). Tanner and Somfai synthesized (+)-PS-5 (267) by use of palladium(O)-catalyzed trons-selective (3-lactam formation in the presence of Pd(dba)3 CHC13 (15mol%) and excess PPh3 in toluene. 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

Carbonylation of methanol to acetic acid is fully discussed in Chapter 9. Another carbonylation process using a phosphine ligand to control the course of the reaction is a highly atom efficient route to the widely used monomer methyl methacrylate (Scheme 4.19). In this process the catalyst is based on palladium acetate and the phosphine ligand, bisphenyl(6-methyl-2-pyridyl) phosphine. This catalyst is remarkably (>99.5%) selective for the 2-carbonylation of propyne under the relatively mild conditions of <100 °C and 60 bar pressure. 

Following this pnblication, the anthors tested a series of Pd-NHC complexes (33-36) for the oxidative carbonylation of amino compounds (Scheme 9.8) [44,45]. These complexes catalysed the oxidative carbonylation of amino compounds selectively to the nreas with good conversion and very high TOFs. Unlike the Cu-NHC catalyst 38-X, the palladium complexes catalysed the oxidative carbonylation of a variety of aromatic amines. For example, 35 converted d-Me-C H -NH, d-Cl-C H -NH, 2,4-Me3-C H3-NH3, 2,6-Me3-C H3-NH3, and 4-Ac-C H3-NH3 to the corresponding nreas with very high TOFs (>6000) in 1 h at 150°C, in 99%, 87%, 85%, 72%, and 60% isolated yields, respectively (Pco,o2 = 3.2/0.8 MPa). 

In the early work on the thermolysis of metal complexes for the synthesis of metal nanoparticles, the precursor carbonyl complex of transition metals, e.g., Co2(CO)8, in organic solvent functions as a metal source of nanoparticles and thermally decomposes in the presence of various polymers to afford polymer-protected metal nanoparticles under relatively mild conditions [1-3]. Particle sizes depend on the kind of polymers, ranging from 5 to >100 nm. The particle size distribution sometimes became wide. Other cobalt, iron [4], nickel [5], rhodium, iridium, rutheniuim, osmium, palladium, and platinum nanoparticles stabilized by polymers have been prepared by similar thermolysis procedures. Besides carbonyl complexes, palladium acetate, palladium acetylacetonate, and platinum acetylac-etonate were also used as a precursor complex in organic solvents like methyl-wo-butylketone [6-9]. These results proposed facile preparative method of metal nanoparticles. However, it may be considered that the size-regulated preparation of metal nanoparticles by thermolysis procedure should be conducted under the limited condition. 

Palladium-catalysed asymmetrie allylations of various carbonyl compounds have been studied by Hiroi et al. using various types of chiral sulfonamides derived from a-amino acids. In particular, the chiral bidentate phosphinyl sulfonamide derived from (5)-proline and depicted in Scheme 1.63 was employed in the presence of palladium to eatalyse the allylation of methyl aminoacetate diphenyl ketimine with allyl aeetate, leading to the eorresponding (7 )-product with a moderate enantioseleetivity of 62% ee. This ligand was also applied to the allylation of a series of other nueleophiles, as shown in Seheme 1.63, providing the eorresponding allylated produets in moderate enantioseleetivities. 

Frankcombe, K. E., Cavell, K. J., Knott, R. B., Yates, B. F., 1997, Competing Reaction Mechanisms for the Carbonylation of Neutral Palladium(II) Complexes Containing Bidentate Ligands a Theoretical Study ,... 

Later, a nickel-catalyzed cascade conversion of propargyl halides and propargyl alcohol into a pyrone in water was reported. The reaction involved a carbonylation by CO and a cyanation by KCN (Eq. 4.55).96 Recently, Gabriele et al. explored a facile synthesis of maleic acids by palladium catalyzed-oxidative carbonylation of terminal alkynes in aqueous DME (1,2-dimethoxyethane) (Eq. 4.56).97... 

The palladium-catalyzed carbonylation of aryl halides in the presence of various nucleophiles is a convenient method for synthesizing various aromatic carbonyl compounds (e.g., acids, esters, amides, thioesters, aldehydes, and ketones). Aromatic acids bearing different aromatic fragments and having various substituents on the benzene ring have been prepared from aryl iodides at room temperature under 1 atm... 

Table 1 Time dependent performance in direct carbonylation of phenol using lead based catalysts with varying palladium sources (0.25 mM Pd, 12 eq. PbO, 5.6 eq. Ce(acac)3, 400 eq. TBAB).

Didgikar MR, Roy D, Gupta SP, Joshi SS, Chaudhari RV (2010) Immobilized palladium nanoparticles catalyzed oxidative carbonylation of amines. Ind Eng Chem Res 49 1027-1032... 

Another compound 9 with three heterocyclic rings linearly fused (5 5 5) with two heteroatoms has been prepared from 1,1 -carbonyl diindole 297 <2001T5199>. Palladium-mediated coupling of the 2- and 2 -positions of 297 afforded the 1,1 -carbonyl-2,2 -biindolyl 9. 1,1 -Carbonyl diindole 297 was in turn obtained in 41% yield from 1,1 -carbonyldiimidazole 296 by reaction with indole in DMSO at 125 °C. The palladium-catalyzed coupling step afforded the desired product 9 in low yield and required a stoichiometric amount of palladium acetate. Therefore, it was felt prohibitively expensive. Addition of various co-oxidants (Ac20, Mn02, and Cu(OAc)2, etc) to make the reaction catalytic in palladium did not result in any improvement of the yield of 18 (Scheme 53). 

The reaction of alcohols with CO was catalyzed by Pd compounds, iodides and/or bromides, and amides (or thioamides). Thus, MeOH was carbonylated in the presence of Pd acetate, NiCl2, tV-methylpyrrolidone, Mel, and Lil to give HOAc. AcOH is prepared by the reaction of MeOH with CO in the presence of a catalyst system comprising a Pd compound, an ionic Br or I compound other than HBr or HI, a sulfone or sulfoxide, and, in some cases, a Ni compound and a phosphine oxide or a phosphinic acid.60 Palladium(II) salts catalyze the carbonylation of methyl iodide in methanol to methyl acetate in the presence of an excess of iodide, even without amine or phosphine co-ligands platinum(II) salts are less effective.61 A novel Pd11 complex (13) is a highly efficient catalyst for the carbonylation of organic alcohols and alkenes to carboxylic acids/esters.62... 

---