Carbonyl polymerization copolymerization

Abstract Development in the field of transition metal-catalyzed carbonylation of epoxides is reviewed. The reaction is an efficient method to synthesize a wide range of / -hydroxy carbonyl compounds such as small synthetic synthons and polymeric materials. The reaction modes featured in this chapter are ring-expansion carbonylation, alternating copolymerization, formylation, alkoxycarbonylation, and aminocarbonylation. 

Copolymerization to form polyketones proceeds by the carbonylation of some alkenes in the absence of nucleophiles. Copolymerization of CO and norbornadiene takes place to give the polyketone 28(28]. Reaction of ethylene and other alkenes with CO affords the polyketones 29. The use of cationic Pd catalysts and bipyridyl or 1,10-phenanthroline is important for the polymerization [29-31]. 

Uses. Besides polymerizing TFE to various types of high PTEE homopolymer, TEE is copolymerized with hexafluoropropylene (29), ethylene (30), perfluorinated ether (31), isobutylene (32), propylene (33), and in some cases it is used as a termonomer (34). It is used to prepare low molecular weight polyfluorocarbons (35) and carbonyl fluoride (36), as well as to form PTEE m situ on metal surfaces (37). Hexafluoropropylene [116-15-4] (38,39), perfluorinated ethers, and other oligomers are prepared from TEE. 

Carbonyl Groups. Such structures could be introduced by air oxidation during polymerization or subsequent processing of the polymer. There is, in fact, some experimental evidence for their formation during polymerization via the following sequence of steps (6) (1) copolymerization of vinyl chloride with adventi-... 

Nucleophilic attack by the amide anion can occur at either the exocyclic or endocyclic carbonyl. The former regenerates the lactamate anion, whereas the latter results in polymerization. Although the locus of nucleophilic attack has no major effects in a homopolymerization, it can exert considerable control over the copolymerizations and on copolymer structure. 

In the polymerization of MMA by BuLi the initiator was reported to react first with many more carbonyl groups than with vinyl double bonds at low temperatures O). Therefore, the butyl carbonyl group must be incorporated through the copolymerization of MMA with butyl isopropenyl ketone formed by the former reaction. 

The maleimide group can undergo a variety of chemical reactions. The reactivity of the double bond is a consequence of the electron withdrawing nature of the two adjacent carbonyl groups which create a very electron-deficient double bond, and therefore is susceptible to homo- and copolymerizations. Such polymerizations may be induced by free radicals or anions. Nucleophiles such as primary and secondary amines, phenates, thiophenates, carboxylates, etc. may react via the classical Michael addition mechanism. The maleimide group furthermore is a very reactive dienophile and can therefore be employed in a variety of Diels Alder reactions. Bisdienes such as divinylbenzene, bis(vinylbenzyl) compounds, bis(propenylphenoxy) compounds and bis(benzocyclobutenes) are very attractive Diels Alder comonomers and therefore some are used as constituents for BMI resin formulations. An important chemical reaction of the maleimide group is the ENE reaction with allylphenyl compounds. The most attractive comonomer of this family is DABA particularly when tough bismaleimide resins are desired. 

The largest proportion of TFE is used for the polymerization into a variety of PITH homopolymers. It is also used as comonomer in the copolymerization with hexaflu-oropropylene, ethylene, perfluorinated ether, and other monomers and also as a comonomer in a variety of terpolymers. Other uses of TFE are to prepare low-molecular-weight polyfluorocarbons, carbonyl fluoride oils, as well as to form PTFE in situ on metal surfaces,13 and in the synthesis of hexafluoropropylene, perfluorinated ethers, and other oligomers.14... 

The above examples of free-radical ring-opening polymerization, which have been explored by Bailey and Endo, produce polymers containing ketonic carbonyl and/or ester groups in the main chain. In addition, these cyclic monomers can be copolymerized with vinyl monomers by free-radical mechanism. Thus, the variety of the polymers produced by radical polymerization has been enlarged. 

T he free radical initiated polymerization of polar monomers containing pendant nitrile and carbonyl groups—e.g., acrylonitrile and methyl methacrylate—in the presence of metal halides such as zinc chloride and aluminum chloride, is characterized by increased rates of polymerization (2, 3, 4, 5,10, 30, 31, 32, 33, 34, 53, 55, 65, 66, 75, 76, 77, 87). Imoto and Otsu (30, 33, 34) have attributed this effect to the formation of a complex between the polar group and the metal halide. The enhanced reactivity of the complexed monomer extends to copolymerization with uncomplexed monomers, such as vinylidene chloride, which are readily responsive to... 

Addition of anionic nucleophiles to alkenes and to heteronuclear double bond systems (C=0, C=S) also lies within the scope of this Section. Chloride and cyanide ions are effieient initiators of the polymerization and copolymerization of acrylonitrile in dipolar non-HBD solvents, as reported by Parker [6], Even some 1,3-dipolar cycloaddition reactions leading to heterocyclic compounds are often better carried out in dipolar non-HBD solvents in order to increase rates and yields [311], The rate of alkaline hydrolysis of ethyl and 4-nitrophenyl acetate in dimethyl sulfoxide/water mixtures increases with increasing dimethyl sulfoxide concentration due to the increased activity of the hydroxide ion. This is presumably caused by its reduced solvation in the dipolar non-HBD solvent [312, 313]. Dimethyl sulfoxide greatly accelerates the formation of oximes from carbonyl compounds and hydroxylamine, as shown for substituted 9-oxofluorenes [314]. Nucleophilic attack on carbon disulfide by cyanide ion is possible only in A,A-dimethylformamide [315]. The fluoride ion, dissolved as tetraalkylammo-nium fluoride in dipolar difluoromethane, even reacts with carbon dioxide to yield the fluorocarbonate ion, F-C02 [840]. 

These methods suggested in the present form by Caunt83) rely on inhibition (retardation) effects of strong catalyst poisons on polymerization. Typical poisons potentially usable for this purpose are carbon oxides, carbonyl sulfide, carbon disulfide, acetylenes and dienes. All these substances exhibit a strong unsaturation they have either two double bonds or one triple bond. Most of the works devoted to application of the poisons to determination of active centers 10,63 83 102 1O7) confirm a complicated nature of their interaction with the catalytic systems. To determine the active centers correctly, it is necessary to recognize and — as much as practicable — suppress side processes, such as physical adsorption and chemisorption on non-propagative species, interaction with a cocatalyst, oligomerization and homopolymerization of the poison and its copolymerization with the main chain monomer. 

---