Carbon dioxide, addition salts

An additional mole of ammonium sulfate per mole of final lactam is generated duting the manufacture of hydroxylamine sulfate [10039-54-0] via the Raschig process, which converts ammonia, air, water, carbon dioxide, and sulfur dioxide to the hydroxylamine salt. Thus, a minimum of two moles of ammonium sulfate is produced per mole of lactam, but commercial processes can approach twice that amount. The DSM/Stamicarbon HPO process, which uses hydroxylamine phosphate [19098-16-9] ia a recycled phosphate buffer, can reduce the amount to less than two moles per mole of lactam. Ammonium sulfate is sold as a fertilizer. However, because H2SO4 is released and acidifies the soil as the salt decomposes, it is alow grade fertilizer, and contributes only marginally to the economics of the process (145,146) (see Caprolactam). 

The decomposition of dithionite in aqueous solution is accelerated by thiosulfate, polysulfide, and acids. The addition of mineral acid to a dithionite solution produces first a red color which turns yellow on standing subsequentiy, sulfur precipitates and evolution of sulfur dioxide takes place (346). Sodium dithionite is stabilized by sodium polyphosphate, sodium carbonate, and sodium salts of organic acids (347). 

Ethylene carbonate (l,3-dioxolan-2-one) is commercially prepared from ethylene oxide by the addition of carbon dioxide to ethylene oxide with either ammonium or alkaU metal salts as catalysts (87) ... 

These can be converted to their sodium salts by precipitation below 30° with aqueous 25% NaOH. The salt is then decomposed by addition of solid (powder ) carbon dioxide and extract with low-boiling petroleum ether. The solvent should be removed under reduced pressure below 20°. The manipulation should be adequately shielded at all times to guard against EXPLOSIONS for the safety of the operator. 

The alcoholic filtrate is evaporated to 50 cc., and 50 g. of barium hydroxide and 150 cc. of distilled water are added (Note 4). The mixture is refluxed for two hours and the excess barium hydroxide is precipitated with carbon dioxide. The barium carbonate is removed by filtration and washed with hot distilled water. A slight excess of sulfuric acid is added to the filtrate to liberate the amino acid from its barium salt, and an excess of barium carbonate is added to remove sulfate ion. The mixture is digested on the steam bath until effervescence ceases, and it is then filtered and the precipitate is washed with hot distilled water. The filtrate and washings are concentrated on the steam bath to a volume of 100 cc., decolorized with i g. of active carbon, filtered, and concentrated to the point of crystallization (about 25 cc.). The amino acid is precipitated by the addition of 150 cc. of absolute alcohol and the product is collected and washed with absolute alcohol. 

Unfortunately, both lithium and the lithiated carbons used as the anode in lithium ion batteries (Li C, l>x>0) are thermodynamically unstable relative to solvent molecules containing polar bonds such as C-O, C-N, or C-S, and to many anions of lithium salts, solvent or salt impurities (such as water, carbon dioxide, or nitrogen), and intentionally added traces of reactive substances (additives). 

Carbon dioxide as additive improves the behavior of (Li02C0CH2)2 films formed above intercalation potentials in EC/DEC-based electrolytes due to increased formation of Li 2 CO 3 [200], It is interesting to note that SO2 reduction occurs at quite high potentials, before the reduction of other electrolyte components films contain inorganic and organic lithium salts [201]. 

When a carbonyl group is bonded to a substituent group that can potentially depart as a Lewis base, addition of a nucleophile to the carbonyl carbon leads to elimination and the regeneration of a carbon-oxygen double bond. Esters undergo hydrolysis with alkali hydroxides to form alkali metal salts of carboxylic acids and alcohols. Amides undergo hydrolysis with mineral acids to form carboxylic acids and amine salts. Carbamates undergo alkaline hydrolysis to form amines, carbon dioxide, and alcohols. 

The use of the lignin fraction is much more cumbersome currently the best-known chemical of a real commercial importance is vanillin, which is obtained by oxidation of the black liquor. Another example is a product called spray-dried lignosulfonate (as sodium salt) obtained from the older, acidic sulfite pulping process. It is sold as a commercial product primarily as a concrete additive for enhanced strength. Since the cement industry is one of the big contributors of carbon dioxide emissions (due to the production of calcium oxide from calcium carbonate), the use of this renewable, wood-derived product not only is fossil-carbon neutral in itself but also reduces carbon dioxide emission due to the diminished need for cement in large infrastructures made of concrete. 

Pyridine compounds 45 can also be produced by the NHC-Ni catalysed cycloaddition between nitriles 43 and diynes 44 (Scheme 5.13) [16]. The SIPr carbene was found to be the best ligand for the nickel complex in this reaction. The reaction required mild reaction conditions and low catalyst loadings, as in the case of cycloaddition of carbon dioxide. In addition to tethered aUcynes (i.e. diynes), pyridines were prepared from a 3-component coupling reaction with 43 and 3-hexyne 23 (Scheme 5.13). The reaction of diynes 44 and nitriles 43 was also catalysed by a combination of [Ni(COD)J, NHC salts and "BuLi, which generates the NHC-Ni catalyst in situ. The pyridines 45 were obtained with comparable... 

On addition to boiling water, black cupric thiocyanate converts to the white cuprous salt with violent gas evolution. It is suggested that the gas is hydrogen cyanide, though carbon dioxide seems probable. 

---