Carbon binary salts

Lanthanum combines with nitrogen, carbon, sulfur and phosphorus at elevated temperatures, forming binary salts. Also, with metalloid elements such as boron, silicon, selenium, and arsenic, similar reactions occur at high temperatures forming similar binary compounds. 

Figure 3 shows the plot for potassium chloride-calcium chloride binary salt system. Figure 4 shows the plot for sodium chloride-sodium sulfate-ammonium chloride ternary salt system. As shown in these figures, the plots of log(L0/L) vs. salt concentration all curve upward convexly, and the effects of these mixed salts on the solubility of carbon dioxide in the aqueous solutions do not show a direct correlation by the Setschenow Equation. These features are the same in all the mixed-salt systems considered here. 

Carbides, which are binary compounds containing anionic carbon, occur as covalent and as salt-like compounds. The salt-like carbides are water-reactive and, upon hydrolysis, yield flammable hydrocarbons. Typical hydrolysis reactions include ... 

A second type of ternary electrolyte systems is solvent -supercritical molecular solute - salt systems. The concentration of supercritical molecular solutes in these systems is generally very low. Therefore, the salting out effects are essentially effects of the presence of salts on the unsymmetric activity coefficient of molecular solutes at infinite dilution. The interaction parameters for NaCl-C02 binary pair and KCI-CO2 binary pair are shown in Table 8. Water-electrolyte binary parameters were obtained from Table 1. Water-carbon dioxide binary parameters were correlated assuming dissociation of carbon dioxide in water is negligible. It is interesting to note that the Setschenow equation fits only approximately these two systems (Yasunishi and Yoshida, (24)). 

The basicity of the molten carbonate is defined as equal to -log (activity of O ) or -log aM20, where a is the activity of the alkali metal oxide M2O. Based on this definition, acidic oxides are associated with carbonates (e g., K2CO3) that do not dissociate to M2O, and basic oxides are formed with highly dissociated carbonate salts (e.g., U2CO3). The solubility of NiO in binary carbonate melts shows a clear dependence on the acidity/basicity of the melt (18,19). In relatively acidic melts, NiO dissolution can be expressed by... 

Lu and coworkers have synthesized a related bifunctional cobalt(lll) salen catalyst similar to that seen in Fig. 11 that contains an attached quaternary ammonium salt (Fig. 13) [36]. This catalyst was found to be very effective at copolymerizing propylene oxide and CO2. For example, in a reaction carried out at 90°C and 2.5 MPa pressure, a high molecular weight poly(propylene carbonate) = 59,000 and PDI = 1.22) was obtained with only 6% propylene carbonate byproduct. For a polymerization process performed under these reaction conditions for 0.5 h, a TOF (turnover frequency) of 5,160 h was reported. For comparative purposes, the best TOF observed for a binary catalyst system of (salen)CoX (where X is 2,4-dinitrophenolate) onium salt or base for the copolymerization of propylene oxide and CO2 at 25°C was 400-500 h for a process performed at 1.5 MPa pressure [21, 37]. On the other hand, employing catalysts of the type shown in Fig. 12, TOFs as high as 13,000 h with >99% selectivity for copolymers withMn 170,000 were obtained at 75°C and 2.0 MPa pressure [35]. The cobalt catalyst in Fig. 13 has also been shown to be effective for selective copolymer formation from styrene oxide and carbon dioxide [38]. 

Binary Selenides. Most binary selenides are formed by heating selenium in the presence of the element, reduction of selenites or selenates with carbon or hydrogen, and double decomposition of heavy-metal salts in aqueous solution or suspension with a soluble selenide salt, eg, Na2Se or (NH Se [66455-76-3]. Atmospheric oxygen oxidizes the selenides more rapidly than the corresponding sulfides and more slowly than the tellurides. Selenides of the alkali, alkaline-earth metals, and lanthanum elements are water soluble and readily hydrolyzed. Heavy-metal selenides are insoluble in water. Polyselenides form when selenium reacts with alkali metals dissolved in liquid ammonia. Metal (M) hydrogen selenides of the M HSe type are known. Some heavy-metal selenides show important and useful electric, photoelectric, photo-optical, and semiconductor properties. Ferroselenium and nickel selenide are made by sintering a mixture of selenium and metal powder. 

The seven-membered cyclo-[S4N3] cation was one of the first binary S-N heterocycles to be structurally characterised. The chloride salt is obtained as a yellow solid by the reaction of [S3N2C1]C1 with S2CI2 in carbon tetrachloride... 

Carbides. As might he expecled from its position in the periodic table, carbon forms binary compounds with the metals in which it exhibits a negative valence, and binary compounds with the non-metals in which it exhibits a positive valence. A convenient classification of the binary compounds of carbon is into ionic or salt-like carbides, intermediate carbides, interstitial carbides, and cuvalent binary carbon compounds. 

Like carbon and silicon, and to a lesser extent, germanium and tin. lead forms binary compounds with metals, such us NajPh and Nu Pb.i. These materials are essentially salt-like, ami contain polypluinbide anions. They are of theoretical interest, because they are intermediate m character between stoichiometric ctimpounds idaltonidc compounds) and intermediate phases. The two compounds cited dissolve in liquid ammonia, electrolyze in such solutions to give the metals, and apparently form ions such as [Fh-r 1J and (Ph.,)4- which readily form amine complexes. 

Xie H, Li S, Zhang S (2006) Highly active, hexabutylguanidinium salt/zinc bromide binary catalyst for the coupling reaction of carbon dioxide and epoxides. J Mol Catal A Chem 250(l-2) 30-34... 

The solubilities of carbon dioxide in aqueous solutions of mixed salts chosen from eight electrolytes (NaCl, KCl, Na2SO>, NH Cl, AfgSOj, (HHh)2SOh, CaCl2, KNOs) were measured at 25° C and 1 atm by the saturation method. Experimental results for the mixed-salt system were not described easily by the modified Setschenow Equation. However, they were correlated very well by an empirical two-parameter equation. The parameters in the equation for the binary and ternary salt solutions could be estimated easily from these equations for the components of the mixed salts. 

The solubility data of carbon dioxide in aqueous solutions of binary mixed salts obtained in this study are summarized in Table I those for ternary mixed salts are summarized in Tables II, III, and IV. Figures 1 and 2 show the solubility data for the potassium chloride-calcium chloride and sodium chloride-sodium sulfate-ammonium chloride mixed solutions, respectively, which are representative of all the data. The salting-out effect was shown in all the systems studied. 

Table I. Experimental Results of Carbon Dioxide Solubility in Aqueous Binary Mixed-Salt Solutions at 25°C and 1 atm...

Colloidal Pt/RuO c- (C5 0.4nm) stabilized by a surfactant was prepared by co-hydrolysis of PtCU and RuCls under basic conditions. The Pt Ru ratio in the colloids can be between 1 4 and 4 1 by variation of the stoichiometry of the transition metal salts. The corresponding zerovalent metal colloids are obtained by the subsequent application of H2 to the colloidal Pt/Ru oxides (optionally in the immobilized form). Additional metals have been included in the metal oxide concept [Eq. (10)] in order to prepare binary and ternary mixed metal oxides in the colloidal form. Pt/Ru/WO c is regarded as a good precatalyst especially for the application in DMECs. Main-group elements such as A1 have been included in multimetallic alloy systems in order to improve the durability of fuel-cell catalysts. PtsAlCo.s alloyed with Cr, Mo, or W particles of 4—7-nm size has been prepared by sequential precipitation on conductant carbon supports such as highly disperse Vulcan XC72 [70]. Alternatively, colloidal precursors composed of Pt/Ru/Al allow... 

---