Carbided nickel

Titanium carbide/nickel and titanium carbonitride/nickel cermets are considered excellent substitutes for tungsten carbide/cobalt cermets because nickel is more abundant and less expensive than cobalt.2... 

IODINE (7553-56-2) A powerful oxidizer. Material or vapors react violently with reducing agents, combustible materials, alkali metals, acetylene, acetaldehyde, antimony, boron, bromine pentafluoride, bromine trifluoride, calcium hydride, cesium, cesium oxide, chlorine trifluoride, copper hydride, dipropylmercury, fluoride, francium, lithium, metal acetylides, metal carbides, nickel monoxide, nitryl fluoride, perchloryl perchlorate, polyacetylene, powdered metals, rubidium, phosphorus, sodium, sodium phosphinate, sulfur, sulfur trioxide, tetraamine, trioxygen difluoride. Forms heat- or shock-sensitive compounds with ammonia, silver azide, potassium, sodium, oxygen difluoride. Incompatible with aluminum-titanium alloy, barium acetylide, ethanol, formamide, halogens, mercmic oxide, mercurous chloride, oxygen, pyridine, pyrogallic acid, salicylic acid sodium hydride, sodium salicylate, sulfides, and other materials. 

Tungsten Carbide-Cobalt, Tungsten Carbide-Nickel,... 

Moissanite, see Silicon carbide Molybdenite, see Molybdenum disulfide Molybdite, see Molybdenum(VI) oxide Molysite, see Iron(III) chloride Montroydite, see Mercury(II) oxide Morenosite, see Nickel sulfate 7-water Mosaic gold, see Tin disulfide Muriatic acid, see Hydrogen chloride, aqueous solutions... 

From 760 to 960°C, circulating fans, normally without baffles, are used to improve temperature uniformity and overall heat transfer by adding some convection heat transfer. They create a directional movement of the air or atmosphere but not the positive flow past the heating elements to the work as in a convection furnace. Heating elements ate commonly chrome—nickel alloys in the forms described previously. Sheathed elements are limited to the very low end of the temperature range, whereas at the upper end silicon carbide resistors may be used. In this temperature range the selection of heating element materials, based on the combination of temperature and atmosphere, becomes critical (1). 

Chrome—nickel alloy heating elements that commonly ate used in low temperature furnaces are not suitable above the very low end of the range. Elements commonly used as resistors are either silicon carbide, carbon, or high temperature metals, eg, molybdenum and tungsten. The latter impose stringent limitations on the atmosphere that must be maintained around the heating elements to prevent rapid element failure (3), or the furnace should be designed to allow easy, periodic replacement. 

Carbon content is usually about 0.15% but may be higher in bolting steels and hot-work die steels. Molybdenum content is usually between 0.5 and 1.5% it increases creep—mpture strength and prevents temper embrittlement at the higher chromium contents. In the modified steels, siUcon is added to improve oxidation resistance, titanium and vanadium to stabilize the carbides to higher temperatures, and nickel to reduce notch sensitivity. Most of the chromium—molybdenum steels are used in the aimealed or in the normalized and tempered condition some of the modified grades have better properties in the quench and tempered condition. 

AISI 321 and 347 are stainless steels that contain titanium and niobium iu order to stabilize the carbides (qv). These metals prevent iatergranular precipitation of carbides during service above 480°C, which can otherwise render the stainless steels susceptible to iatergranular corrosion. Grades such as AISI 316 and 317 contain 2—4% of molybdenum, which iacreases their creep—mpture strength appreciably. In the AISI 200 series, chromium—manganese austenitic stainless steels the nickel content is reduced iu comparison to the AISI 300 series. 

Another important function of metallic coatings is to provide wear resistance. Hard chromium, electroless nickel, composites of nickel and diamond, or diffusion or vapor-phase deposits of sUicon carbide [409-21-2], SiC , SiC tungsten carbide [56780-56-4], WC and boron carbide [12069-32-8], B4C, are examples. Chemical resistance at high temperatures is provided by aUoys of aluminum and platinum [7440-06-4] or other precious metals (10—14). 

Thermal spray processes can be used to give coatings of chromium carbide or nickel chromium for erosion resistance, copper nickel indium for fretting resistance, tungsten carbide cobalt for wear and abrasion resistance, and even aluminum siHcon polyester mixtures for abradabiHty. 

Metal-Matrix Composites. A metal-matrix composite (MMC) is comprised of a metal ahoy, less than 50% by volume that is reinforced by one or more constituents with a significantly higher elastic modulus. Reinforcement materials include carbides, oxides, graphite, borides, intermetahics or even polymeric products. These materials can be used in the form of whiskers, continuous or discontinuous fibers, or particles. Matrices can be made from metal ahoys of Mg, Al, Ti, Cu, Ni or Fe. In addition, intermetahic compounds such as titanium and nickel aluminides, Ti Al and Ni Al, respectively, are also used as a matrix material (58,59). P/M MMC can be formed by a variety of full-density hot consolidation processes, including hot pressing, hot isostatic pressing, extmsion, or forging. 

Because of constitutional complexity, the exact chemistries of nickel-base superalloys must be controlled carehiUy in order to avoid the precipitation of deleterious topologically close-packed (TCP) phases and extraneous carbides after long-term high temperature exposure. Heat-treatment schedules and thermomechanical treatments in the case of wrought alloys also are important to provide optimum strength and performance. 

Niobium carbide is used as a component of hard metals, eg, mixtures of metal carbides that are cemented with cobalt, iron, and nickel. Along with tantalum carbide, niobium carbide is added to impart toughness and shock and erosion resistance. The spiraling rise in the price of tantalum has spurred the development of a hafnium carbide—niobium carbide substitute for tantalum carbide (68). These cemented carbides are used for tool bits, drill bits, shovel teeth, and other wear-resistant components turbine blades and as dies in high pressure apparatus (see Carbides). 

Cobalt. There is no U.S. mine production of cobalt. Refining of imported nickel—cobalt mattes has not occurred since the mid-1980s. About 1600 t of secondary cobalt was recycled from scrap by 13 faciUties in the United States representing - 22% of total U.S. consumption. The price of the metal was around 44/kg. Most is imported from Zaire and Zambia. Increasing quantities are coming from Russia. Historically, the price of cobalt has been quite volatile and dependent on the pohtical environment in those countries. Cobalt is used in superaHoys, 40% catalysts, 14% paint driers, 11% magnetic alloys, 10% and cemented carbides and other uses, 16%. 

---