Calcium chloride methyl methacrylate

Compound Name Mercuric Chloride Mercuric Iodide Mercuric Chloride Mercuric Ammonium Chloride Mercuric Cyanide Mercuric Cyanide Mercuric Chloride Mercuric Nitrate Mercuric Oxide Mercuric Chloride Mercuric Nitrate Mercurous Chloride Mercurous Nitrate Mercurous Chloride Mesityl Oxide Calcium Resinate Methyl Methacrylate N-Butyl Methacrylate Glycidyl Methacrylate Ethyl Methacrylate Methyl Methacrylate Methallyl Chloride Methallyl Chloride Formaldehyde Solution Methane... 

Methyl methacrylate (MMA) was washed with a solution of sodium carbonate, dried over calcium chloride and distilled under reduced pressure and nitrogen. Acrylonitrile was washed with sulfuric acid (5 %), sodium carbonate (5 %) and water after drying, the monomer was distilled under reduced pressure and nitrogen. Styrene was washed with sodium hydroxyde (10 %) and water, dried and distilled. THF was purified by washing and distillation. 

Methacrylamide Methyl methacrylate (76 g) is shaken for 7 days with ammonia solution (d 0.885 390 ml). The homogeneous solution is then evaporated in portions in a vacuum (19 mm) on a water-bath (78°), and the crude product is dried over calcium chloride to constant weight (65 g), broken into small pieces, and dissolved in methylene chloride (580 ml) boiling under reflux. The solution is filtered through a filter heated by hot water, and the residue is extracted again with methylene chloride (60 ml). When the filtrates are cooled in an ice-bath, monomeric methacrylamide crystallizes two further fractions can be obtained from the mother liquors, bringing the total yield of material melting at 95-109° up to 48 g (75%). To obtain the pure amide, as thin tablets, m.p. 110-111°, requires repeated recrystallization. 

Incorporation of 0.1—4% zeolites 13X, 5A, 4A, lOX, XW and ala) natural zeolites and synthetic pdyn rs (polystyrene, vinyl chloride-vinyl acetate copolymer, poly propylene, acrylonitrile, butadiene styrene copolymer, poly (methyl methacrylate or polyetl lene) containing 0.1-4% antistatic agent improves antistatic properties. However tire zeolites alone fail to do so In another instance a composition of polyvinylchloride 100, dioctylthalate 80, stabilizer 2, Pd-stearate-1, and zeolite 100 parts is rolled at 160 ° and pressed to give a white sheet having surface resistivity 3.8 x 10 ohm-cm coitq>ared with 1.5 X 10 ohm-cm for a similar sheet containing calcium carbonate in place of zedite, vdiich reflects the definite role of these zeolites in improving the antistatic properties of the composition. 

Acetal homopolymer Animal glue Calcium resinate 1-Decene, homopolymer, hydrogenated Glyceryl rosinate Hydrogenated rosin Methyl rosinate Pentaerythrityl rosinate Polyethylene, chlorosulfonated Polyphenylene ether Potassium rosinate Sodium rosinate Tall oil rosin Vinylidene chloride/methyl acrylate/methyl methacrylate copolymer food-contact articles, for repeated use Butadiene/acrylonitrile copolymer EPM rubber Epoxy, bisphenol A/epichlorohydrin Ethylene/propylene/dicyclopentadiene terpolymer Hexafluoropropylene/vinylidene fluoride copolymer Hexafluoropropylene/vinylidene fluoride/tetrafluoroethylene terpolymer Hydrogenated butadiene/acrylonitrile... 

Unsaturated monomers have been adsorbed on to fillers and then polymerised to give encapsulated products. The modulus of the polymer could be modified by selecting the monomer [40]. Acrylic acid-vinyl chloride (1 99) has been polymerised on to calcium carbonate [41] reports of the use of 3,5-triacryloxyhexahydro-S-triazine [42], bis-phenol A and epichlorohydrin [43], methyl methacrylate [44], and acrylic acid [45] have also been published. 

Sodium tripolyphosphate Methyl methacrylate Calcium chloride... 

---