Calcium carbonate modifiers

Fillers (qv) are occasionally used in flexible slab foams the two most commonly used are calcium carbonate (whiting) and barium sulfate (barytes). Their use level may range up to 150 parts per 100 parts of polyol. Various other ingredients may also be used to modify a flexible foam formulation. Cross-linkers, chain extenders, ignition modifiers, auxiHary blowing agents, etc, are all used to some extent depending on the final product characteristics desired. 

Polypropylene polymers are typically modified with ethylene to obtain desirable properties for specific applications. Specifically, ethylene—propylene mbbers are introduced as a discrete phase in heterophasic copolymers to improve toughness and low temperature impact resistance (see Elastomers, ETHYLENE-PROPYLENE rubber). This is done by sequential polymerisation of homopolymer polypropylene and ethylene—propylene mbber in a multistage reactor process or by the extmsion compounding of ethylene—propylene mbber with a homopolymer. Addition of high density polyethylene, by polymerisation or compounding, is sometimes used to reduce stress whitening. In all cases, a superior balance of properties is obtained when the sise of the discrete mbber phase is approximately one micrometer. Examples of these polymers and their properties are shown in Table 2. Mineral fillers, such as talc or calcium carbonate, can be added to polypropylene to increase stiffness and high temperature properties, as shown in Table 3. 

Seawater Distillation. The principal thermal processes used to recover drinking water from seawater include multistage flash distillation, multi-effect distillation, and vapor compression distillation. In these processes, seawater is heated, and the relatively pure distillate is collected. Scale deposits, usually calcium carbonate, magnesium hydroxide, or calcium sulfate, lessen efficiency of these units. Dispersants such as poly(maleic acid) (39,40) inhibit scale formation, or at least modify it to form an easily removed powder, thus maintaining cleaner, more efficient heat-transfer surfaces. 

Lucie, S., Kovacevic, V., Packham, D.E., Bogner, A., Gerzina, A., Stearate-modified calcium carbonate fillers and their effect on the properties of polyvinyl acetate, composites. Proc. 2nd Int. Symp. Polymer Surface Modification Relevance to Adhesion, Newark, NJ, 24-26 May, 1999. 

Soft upland waters are aggressive to most metals, their behaviour depending to some extent on pH values as discussed on p. 2.53. They are inevitably unsaturated with respect to calcium carbonate and it is not usually practicable to modify the carbonate equilibrium to make them non-aggressive. 

These formulations may be modified to further reduce the impact of adding dissolved solids to the program by substituting the SHMP for an organic polymer calcium carbonate control agent, such as PMA. 

A combination of graded calcium carbonate particle sizes, a nonionic polysaccharide of the scleroglucan type, and a modified starch, has been claimed for use as a fluid loss formulations [915]. It is important that the calcium carbonate particles are distributed across a wide size range to prevent filtration... 

Scleroglucan, starch, modified calcium carbonate particles [915]... 

Figure 8. Partition coefficients (Kd) for Th and Pa and the fractionation factor (F) between Th and Pa plotted as a function of the opal and calcium carbonate percentage in settling particulate material. Note the tendency for the Kd for Th to increase with increasing carbonate fraction and decrease with increasing opal fraction. Pa shows the opposite behavior so that F increases with low opal fraction or high carbonate fraction. This plot is modified from Chase et al. (in press-b) but excludes the continental margin data also shown in that study and instead focuses exclusively on open-ocean sites.

Marble. The word marble is used as the common name for two types of monomineral rocks one derived from limestone and therefore composed of calcium carbonate, the other derived from dolomite and composed of calcium magnesium carbonate. Extremely high pressures and heat during past geological times modified the structure of both limestone and dolomite, compacting them into a characteristic crystal structure. Most marble is white however, minor and trace amounts of metallic impurities cause the formation of stains in a variety of colors, hues, and patterns, or of colored marble. 

Calcium carbonate used as an additive in polymeric systems, is a hydrophilic, finely divided powder. When used as a component in polyolefins, the calcium carbonate s surface is modified by coating it with a thin layer of stearic acid. Why would compounders prefer to use the stearic acid coated material over the uncoated mineral ... 

Traces of copper and lead are separated [301] from macro amounts of calcium, magnesium, sodium, and potassium by adsorption from the sample onto active carbon modified with hydroxyquinoline dithizone or diethyldithiocarbamate. 

Let us add the moles of precipitated calcium carbonate as a sixth variable x6, modify the calcium and carbonate conservation equations f2(x) and /3(x) in order to account for solid phase contribution, and use the expression of the solubility product as a sixth equation. The six equations to be solved read... 

Phosphate and phosphonate molecules have a very high affinity for calcium carbonate surfaces, as shown by their influence on the precipitation and growth of calcite [164-166]. Accordingly, organophosphorus compounds such as alkylphosphoric acids [167-169] and phosphonic acid-terminated polyoxyethylene [170, 171] have been used to modify the surface of CaCOs powders. 

Palladium catalysts are more often modified for special selectivities than platinum catalysts. Palladium prepared by reduction of palladium chloride with sodium borohydride Procedure 4, p. 205) is suitable for the reduction of unsaturated aldehydes to saturated aldehydes [i7]. Palladimn on barium sulfate deactivated with sulfur compounds, most frequently the so-called quinoline-5 obtained by boiling quinoline with sulfur [34], is suitable for the Rosenmund reduction [i5] (p. 144). Palladium on calcium carbonate deactivated by lead acetate Lindlar s catalyst) is used for partial hydrogenation of acetylenes to cw-alkenes [36] (p. 44). 

Extraction of stevia sweeteners from dried leaves can be accomplished with acetonitrile in the presence of calcium carbonate solution (116) or with boiling water adjusted to pH 9.0 (107). Ahmed and Dobberstein (117) extracted stevioside and rebaudioside A and C from dried leaves of S. rebaudiana in a micro-Soxhlet apparatus. They observed that chloroform/methanol provided the best results, compared to chloroform or to chloroform/methanol/water. Extraction of stevioside, rebaudioside A and C, and dulcoside A can also be performed by subcritical fluid extraction using C02 and methanol as a modifier. Such an extraction technique has been gaining popularity as an analytical tool because it is rapid, simple, and less expensive in terms of solvent cost (110). Beverages, tabletop sweeteners, beverages containing pulp, and candies are prepared as indicated in Sec. I.C (110,115,118). 

---