Bromination side-chain

Molar ratios of bromine to m-nitrotoluene ranging from 0.25 to 1.00 were applied. The reactants were contacted in an interdigital micro mixer followed by a capillary reactor. At temperatures of about 200°C nearly complete conversion is achieved (see Fig. 6). The selectivity to the target product benzyl bromide is reasonably high (at best being 85% at 200°C and higher being 80%). The main sideproduct formed is the nitro-substituted benzal bromide, i.e. the two-fold brominated side-chain product. 

Like radical side-chain bromination, side-chain chlorination by S02C12 and a peroxide occurs mainly on the a-carbon atom ethylbenzene gives mainly (l-chloroethyl)benzene cumol gives 90% of the a- and 10% of the /9-chloro product. Chlorine enters the jS-position of terf-butylbenzene. o- and p-Nitro-toluene cannot be converted into the corresponding benzyl chlorides by S02C12 and a peroxide.419... 

PHAs containing unsaturated or brominated side chains have been used as substrates for the production of glycoconjugates (derivatives of per-O-acetyl-l-thio-P-maltose-PHAs) via anti-Markovnikov additions. As expected, maltosyl-PHAs showed an enhanced hydrophihcity and hence better solubility and bioavailability (Constantin et al. 1999). 

In the absence of catalysts, toluene when treated with chlorine (or bromine) at the boiling point, preferably with exposure to sunlight or other bright light source, undergoes halogenation in the side chain. The entrance of the first chlorine atom, for example, proceeds at a much faster rate than the entrance of the second chlorine atom so that in practice the major portion of the toluene is converted into benzyl chloride before appreciable chlorination of benzyl chloride occurs ... 

The bromination of aromatic hydrocarbons can occur either in a side chain or on the ring, depending on conditions. In the presence of sunlight aLkylben2enes are brominated predominately in the side chain (24). 

Alkyl side chains in both pyrazines and quinoxalines are susceptible to halogenation by elemental halogens (28JCS1960, 68TL5931) and under radical conditions with NBS (72JOC511). Thus, bromination of 2-methylquinoxaline with bromine in the presence of sodium acetate... 

Apart from the nuclear bromination observed (Section 2.15.13.1) in the attempted radical bromination of a side-chain methyl group leading to (396), which may or may not have involved radical intermediates, the only other reaction of interest in this section is a light-induced reduction of certain hydroxypyrido[3,4-f)]pyrazines or their 0x0 tautomers analogous to that well-known in the pteridine field (63JCS5156). Related one-electron reduction products of laser photolysis experiments with 1 -deazaflavins have been described (79MI21502). 

During the preparation of the dihalo-(usually dibromo) 20-ketopregnanes, other reactive sites must be protected (e.g., addition of bromine to the A -double bond, ketal formation with a 3-ketone). An elegant method which avoids such problems has been devised by the Upjohn group in their studies on the conversion of 11-ketoprogesterone to hydrocortisone. The former is reacted with ethyl oxalate at C-2 and C-21, then addition of three moles of bromine gives a 2,21,21-tribromide. Alkaline rearrangement produces the side chain unsaturated acid, and the bromine at C-2 is subsequently removed with zinc. 

The sensitivity of this ketol side chain to acid or base requires careful control of the hydrolysis of the epoxyacetate. Alternatively, the enol acetate can be brominated and the resulting bromo ketone converted to the 21-acetoxy-20-ketone ... 

If chlorine and bromine are allowed to act upon an aromatic hydrocarbon like toluene, which has a side-chain, substitution may occur in the nucleus or the side-chain, according to the conditions. Generally speaking, in the cold and in presence of a halogen carrier, nuclear substitution occurs, Irut at a high temperatuie the halogen passes into the side-chain (see Piep. 

Bromination of polymethylbenzenes by Br in CH3NO2 Electrophilic side-chain reactions 25 -8.10... 

Campaigne et al. have used 3-thenyl bromide obtained by benzoyl peroxide-catalyzed, side-chain bromination of 3-methylthiophene with A -bromosuccinimide, as a starting material for 3-substituted thiophenes. - 22 3-Methylthiophene is now prepared commercially from itaconic acid. The reactive halogen in 3-thenyl bromide could be directly reacted with a variety of nucleophiles, such as cyanide, or malonate, to give more complex 3-substituted compounds. 3-Thenyl bromide was converted by the Sommelet reaction to 3-thio-phenealdehyde which, with silver oxide, was oxidized to 3-thio-... 

This activation of the ortho position is most strikingly illustrated in the reactivity of 2,5-dimethylthiophene, which competitive experiments have shown to undergo the SnCb-catalyzed Friedel-Crafts reaction more rapidly than thiophene and even 2-methylthiophene. The influence of the reagent on the isomer distribution is evident from the fact that 2-methoxythiophene is formylated and bromi-nated (with A -bromosuccinimide) only in the 5-position. Similarly, although 3-bromo-2-methylthiophene has been detected in the bromi-nation of 2-methylthiophene with bromine, only the 5-isomer (besides some side-chain bromination) is obtained in the bromination of alkylthiophenes with A -bromosuccinimide. ° However, the mechanism of the latter type of bromination is not established. No lines attributable to 2-methyl-3-thiocyanothiophene or 2-methyl-3-chIoro-thiophene could be detected in the NMR spectra of the substitution products (5-isomers) obtained upon thiocyanation with thiocyanogen or chlorination with sulfuryl chloride. 2-Methyl- and 2-ethyl-thiophene give, somewhat unexpectedly, upon alkylation with t-butyl chloride in the presence of Feds, only 5-t-butyl monosubstituted and... 

Using these assumptions and conventions, Imoto and co-workers have correlated a number of series of reactions of thiophenes and furans. The reactions studied are the acid-base equilibria pK values) and the acid catalyzed methylations (thiophenes only) of thiophene-and furan-carboxylic acids and the alkaline hydrolyses of their ethyl esters the side-chain bromination of the a-acetylthiophenes, and the a-mercuration of thiophenes and the polarographic half-wave potentials of the methyl esters of thiophene- and furan-carboxylic acids and of nitrothiophenes. The pK values were determined and the ester hydrolyses studied for all three substitution orientations in the thiophene series. For the 4-R-2-Y and 5-R-2-Y series, the p-values do not appear significantly different and the data could probably be combined into a single series unfortunately, however, no limits of accuracy are reported for the p-values, and some of the raw data are not readily available so recalculation is not easily possible. For the 5-R-3-Y series the p-values deviate considerably from the other values however, whereas they are higher for the pK values, they are lower for the ester hydrolyses, and it is possible that the differences are neither systematic nor significant. 

The bromination of 5,8-dimethoxyquinoxaline in methanol gives a mixture of 6-bromo and 6,7-dibromo compounds/ Treatment of 2-methylquinoxaline with bromine in acetic acid yields a mixture of 27% of 2 bromomethyl- and 37% of 2-dibromomethyl-quinoxaline." Thus in the absence of powerfully activating groups, side-chain rather than nuclear substitution takes place. 

Introduction of branching in the side chain is apparently consistent with retention of the antiparkinson activity. Bro-mination of propiophenone gives the brominated ketone, 33. Dis-... 

One scheme for preparation of the diamine side chain consists in first reducing the carbonyl group of the haloketone, 73. Displacement of the halogen with diethylamine gives the amino alcohol (74). Treatment of that intermediate with thionyl bromide serves to replace the hydroxyl by bromine (75). The synthesis is completed by displacement of the bromine with ammonia. 

Finally the aminoquinoline bearing a primary amine at the terminal carbon atom of the side chain is itself an effective antimalarial drug. Ring opening of 2-methyltetrahydrofuran by bromine gives the dibromide, 99. The primary halide is sufficiently less hindered so that reaction with potassium phthalimide affords exclusively the product of displacement of that halogen (100). Alkylation of the aminoquinoline with lOO affords the secondary amine, 101. Removal of the phthalimide group by means of hydrazine yields primaquine (102). ... 

On treatment with bromine in carbon tetrachloride solution, it yields a dibromide in which two atoms of bromine have been fixed in the pro-penyl side chain, melting at 85° to 86°. 

The lower thermal stability of cardanol-formaldehyde resin and their derivatives were expected because of the presence of the libile side chain in the system. Although phenolics are superior in their properties, their bromo derivatives exhibit very low char yields. Oxidation of the char by a decomposition product is suspected. Evaluation of the LOI data with char yields individually for phosphorus and bromine suggests a positive interac-... 

Side-chain bromination at the benzylic position occurs when an alkylbenzene is treated with /V-bromosuccinimide (NBS). For example, propylbenzene gives (l-bromopropyl)benzene in 97% yield on reaction tvith NBS in the presence of benzoyl peroxide, (PhC02)2f as a radical initiator. Bromination occurs exclusively in the benzylic position and does not give a mixture of products. 

The benzylic position of an alkylbcnzene can be brominated by reaction with jV-bromosuccinimide, and the entire side chain can be degraded to a carboxyl group by oxidation with aqueous KMnCfy Although aromatic rings are less reactive than isolated alkene double bonds, they can be reduced to cyclohexanes by hydrogenation over a platinum or rhodium catalyst. In addition, aryl alkyl ketones are reduced to alkylbenzenes by hydrogenation over a platinum catalyst. 

Benzylic bromination of aikylbenzene side chain (Section 16.9)... 

---