Nitrobenzenes bromination

One can prepare bromonitrobenzenes either by nitrating bromobenzenc or by brominating nitrobenzene. Will these two reactions give the same product (or product distribution) If not, how will the products differ ... 

Pour the resulting dark reddish-brown liquid into 500 ml. of water to which 17 ml. of saturated sodium bisulphite solution has been added (the latter to remove the excess of bromine). Steam distil the resulting mixture (Fig. II, 41,1) , collect the first portion of the distillate, which contains a little unchanged nitrobenzene, separately. Collect about 4 litres of distillate. Filter the yellow crystalline solid at the pump, and press well to remove the adhering liquid. The resulting crude m-bromonitrobenzene, m.p. 51-52°, weighs 110 g. If required pure, distil under reduced pressure (Fig. II, 19, 1) and collect the fraction of b.p. 117-118°/9 mm. it then melts at 56° and the recovery is about 85 per cent. 

Quinolinium chloride in nitrobenzene reacts with excess bromine to give an 81% yield of 3-bromoquinoline (24). It seems likely that the 1,2-dibromo complex is actually being brominated. 

Ha.loisoquinolines, The Sandmeyer reaction is commonly used to prepare chloroisoquinolines from the amino compound. The corresponding hydroxy compounds are also used by treatment with chlorides of phosphoms. The addition of bromine to a slurry of isoquinoline hydrochloride in nitrobenzene gives a 70—80% yield of 4-bromoisoquinoline [1532-97-4J. Heating 1-chloroisoquinoline [19493-44-8] with sodium iodide andhydriodic acid gives 1-iodoisoquinoline [19658-77-6] (179). 

The six-position may be functionalized by electrophilic aromatic substitution. Either bromination (Br2/CH2Cl2/-5°) acetylation (acetyl chloride, aluminum chloride, nitrobenzene) " or chloromethylation (chloromethyl methyl ether, stannic chloride, -60°) " affords the 6,6 -disubstituted product. It should also be noted that treatment of the acetyl derivative with KOBr in THF affords the carboxylic acid in 84% yield. The brominated crown may then be metallated (n-BuLi) and treated with an electrophile to form a chain-extender. To this end, Cram has utilized both ethylene oxide " and dichlorodimethyl-silane in the conversion of bis-binaphthyl crowns into polymer-bound resolving agents. The acetylation/oxidation sequence is illustrated in Eq. (3.54). 

Thermal decomposition gives olefins, probably by rearrangement of intermediate carbenes. For example, the decomposition of 3,3-penta-methylenediazirine (68) in nitrobenzene above 160°C gives cyclohexene [Eq, (58)]. The yield as determined by bromine titration... 

When the aldehyde is heated on the water-bath with 25 per cent, hydrochloric acid, it yields a triphenylmethane derivative, nonamethoxy-triphenylmethane, a body consisting of snow-white crystals, melting at 184 5°. The action of concentrated nitric acid upon the solution in glacial acetic acid of this triphenylmethane derivative gives rise to 1, 2, 5-trimethoxy-4-nitrobenzene (melting at 130°). With bromine, nonamethoxytriphenylmethane combines, with separation of a molecule of trimethoxy bromobenzene, into a tribromo additive compound of hexamethoxy diphenylmethane, a deep violet-blue body. The 1, 2, 5-tri-methoxy-4-bromobenzene (melting at 54 5°) may be obtained more readily from asaronic acid. 

Bromination of the indenobenzazepine 9 with bromine in acetic acid produces a dibromo adduct which, on heating in nitrobenzene or in dimethylformamide, yields the 12-bromo derivative 10.97 The bromo compound 10 is also obtained directly from 9 with Af-bromosuccinimidc in hot nitrobenzene. 

De la Mare and Hilton198 measured the rates at 25 °C of bromination of benzene, benzoic acid, phthalic acid, 2-nitrobenzoic acid, trimethylanilinium perchlorate and nitrobenzene by hypobromous acid with sulphuric or perchloric acids as catalysts, in some cases in aqueous dioxan, in an attempt to discover if Br+ or H2OBr+ was the appropriate brominating species since the logarithm of the rates should then follow the acidity functions H0 or HR (J0) respectively. The results, however, were inconclusive and relative rates of bromination were determined (see Table 53). 

The compound l-bromo-4-nitrobenzene (p-bromonitrobenzene) can be brominated. What do you expect to be the major product and why Draw appropriate Lewis structures to support your answer. 

With deactivated aromatic derivatives, such as nitrobenzene, BrFs and Br2 is an effective reagent, gives the meta-brominated product. ... 

Nitrobenzene reacts with the O-trimethylsilyl ketene acetal 663 in the presence of tris(dimethylamino)sulfur(trimefhylsilyl)difluoride (Me2N)3S(Me3SiF2) (TASF) to give the O-silylated adduct 1007 a, which can be oxidized in situ, e. g. by bromine, to give the 4-substituted nitrobenzene 1008 in an overall yield of 79% [87] (Scheme 7.28). With less hindered ketene-acetals, however, mixtures of ortho- and para-substituted nitrobenzenes are obtained. Yet, on reaction of 4-fluoronitroben-zene with the cyclic O-trimethylsilyl ketene acetal 1009 the ortho-substitution product 1010 is obtained in 79% yield [87]. 

Cyanide and thiocyanate anions in aqueous solution can be determined as cyanogen bromide after reaction with bromine [686]. The thiocyanate anion can be quantitatively determined in the presence of cyanide by adding an excess of formaldehyde solution to the sample, which converts the cyanide ion to the unreactive cyanohydrin. The detection limits for the cyanide and thiocyanate anions were less than 0.01 ppm with an electron-capture detector. Iodine in acid solution reacts with acetone to form monoiodoacetone, which can be detected at high sensitivity with an electron-capture detector [687]. The reaction is specific for iodine, iodide being determined after oxidation with iodate. The nitrate anion can be determined in aqueous solution after conversion to nitrobenzene by reaction with benzene in the presence of sulfuric acid [688,689]. The detection limit for the nitrate anion was less than 0.1 ppm. The nitrite anion can be determined after oxidation to nitrate with potassium permanganate. Nitrite can be determined directly by alkylation with an alkaline solution of pentafluorobenzyl bromide [690]. The yield of derivative was about 80t.with a detection limit of 0.46 ng in 0.1 ml of aqueous sample. Pentafluorobenzyl p-toluenesulfonate has been used to derivatize carboxylate and phenolate anions and to simultaneously derivatize bromide, iodide, cyanide, thiocyanate, nitrite, nitrate and sulfide in a two-phase system using tetrapentylammonium cWoride as a phase transfer catalyst [691]. Detection limits wer Hi the ppm range. 

Halogenations are strongly catalyzed by mercuric acetate or trifluoroacetate. These conditions generate acyl hypohalites, which are the active halogenating agents. The trifluoroacetyl hypohalites are very reactive reagents. Even nitrobenzene, for example, is readily brominated by trifluoroacetyl hypobromite.19... 

There are certain formal analogies here to m- attack on nitrobenzene (cf. p. 152), but pyridine is very much more difficult to substitute than the former. Thus nitration, chlorination, bromination and Friedel-Crafts reactions cannot really be made to take place usefully, and sulphonation only occurs on heating with oleum for 24 hours at 230°, with an Hg2 catalyst. This difficulty of attack is due partly to the fact that pyridine has an available electron pair on nitrogen, and can thus protonate (66), or interact with an electrophile (67) ... 

Bromo-2,5-Dimethoxyamphetamine, This should be prepared by reducing the above nitro-propene with LAH as described below. Other reductions may or may not be compatible with the electronic character of the bromine atom. This particular reduction can also be used to reduce most any nitrostyrene, nitrobenzene, etc. Note These will work too, CPB, 16, 217 or JACS, 72, 2781, also found in this book. 

White monoclinic crystals density 5.09 g/cm melts at 64°C (triple point) sublimes at 56.6°C critical temperature 232.65°C critical pressure 46 atm critical volume 250 cm /mol reacts with water forming UO2F2 and HF soluble in chloroform, carbon tetrachloride and fluorocarbon solvents soluble in liquid chlorine and bromine dissolves in nitrobenzene to form a dark red solution that fumes in air. 

---