Bisphenols, substituted

Table I. Oxygen Permeabilities of Polycarbonates Containing Bisphenols Substituted at...

The birefringence for phenyl-substituted PC (4) (T = 176 C) is reduced to about 50%, for benzyl substituted PC (5) (T = 138 C) to about 25%, and for four-ring bisphenol PC (6) to 8% of the value for BPA-PC (183,190,195,197,198) on condition of an optimum conformation of the phenyls in the side groups perpendicular to the aromatic rings in the backbone. In reaUty, however, these low birefringence values are not achieved, because the optimum conformation of the phenyl rings cannot be achieved in injection-stamped disks. 

PC-cocondensates (BPA-PC, bensyl-substituted PC, four-ring bisphenol-PC, PC with lateral phenyl Bayer AG... 

Polymerization via Nucleophilic Substitution Reaction. Halo- and nitro- groups attached to phthahmide groups are strongly activated toward nucleophilic substitution reactions. Thus polyetherimides ate synthesized by the nucleophilic substitution reaction of bishaloimides (59,60) and bisnitroimides (61,62) with anhydrous bisphenol salts in dipolar aptotic solvents. 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

Curing Systems. The most commonly used vulcanizing agent for the polyethers not containing AGE, that is, ECH and ECH—EO, is 2-mercaptoimidazoline, also called ethylenethiourea [96-45-7]. Other commercially appHed curing agents include derivatives of 2,5-dimercapto-l,3,4-thiadiazole, trithiocyanuric acid and derivatives, bisphenols, diamines, and other substituted thioureas. 

The resins are made by batch processes employing Friedel-Crafts reactions or nucleophilic aromatic substitution. Udel resin and Radel R resin are produced by the nucleophilic displacement of chloride on 4,4 -dichlorodiphenyl sulfone by the potassium salts of bisphenol A and 4,4 -biphenol, respectively (97) ... 

Dehydrofluorination by primary and secondary aliphatic amines occurs at room temperature and is the basis of diamine cross linkmg, which occurs by dehydrofluonnation and subsequent nucleophihc substitution of the double bond The locus of dehydrofluonnation is a VDF unit flanked by two perfluoroolefin units This selectively base-sensitive methylene group also undergoes elimination as the first step in phase-transfer-catalyzed cross-hnking with quaternary ammo mum or phosphomum salts, bisphenols, and morganic oxides and hydroxides as HF acceptors [31, 32]... 

Recently, the pyrazole group containing bisphenols have been synthesized from activated aromatic dihalides and 3,5-bis (4-hydroxy phenyl)-4-phenyl pyrazole or 3,5-bis(4-hydroxy phenyl)-1,4-diphenyl pyrazole. A novel synthesis of imido aryl containing bisphenols has been reported [32]. N-substituted l,4-bis(4-hydroxy phenyl)-2,3-naphthalimides were prepared from phenolphthalein and copolymerized with aromatic sulfone or ketone difluorides to obtain the poly(imidoaryl ether) sulfones/ ketones. 

Other salts, especially fluoride salts, (e.g., KF) can be used to perform nucleophilic substitution. As is well known, halides, and particularly the fluoride anions, are rather powerful Lewis bases and can exert a catalytic effect on aromatic nucleophilic substitutions in dipolar aprotic solvents. Phenols can be alkylated in the presence of KF (or CsF) absorbed on Celite64,65 or Et4NF.66 Taking advantage of this reaction, halophenols and dihalides with bisphenols have been successfully polymerized in sulfolane at 220-280°C by using KF as the base. 

The para-fluorine atoms on highly fluorinated aromatic compounds such as hexafluorobenzene or decafluorobiphenyl are activated and thus can go through aromatic nucleophilic substitution with bisphenols in an aprotic solvent at low temperatures (<80°C).121 123... 

The Ullman reaction has long been known as a method for the synthesis of aromatic ethers by the reaction of a phenol with an aromatic halide in the presence of a copper compound as a catalyst. It is a variation on the nucleophilic substitution reaction since a phenolic salt reacts with the halide. Nonactivated aromatic halides can be used in the synthesis of poly(arylene edier)s, dius providing a way of obtaining structures not available by the conventional nucleophilic route. The ease of halogen displacement was found to be the reverse of that observed for activated nucleophilic substitution reaction, that is, I > Br > Cl F. The polymerizations are conducted in benzophenone with a cuprous chloride-pyridine complex as a catalyst. Bromine compounds are the favored reactants.53,124 127 Poly(arylene ether)s have been prepared by Ullman coupling of bisphenols and... 

Hexa-fluorobisphenol A (HFBPA) based polysulfone and poly(arylene ether phosphine oxide) were prepared by nucleophilic aromatic substitution similar to that of bisphenol-A-based polysulfone and poly(arylene ether phosphine oxide).11... 

Substituted phenols such as cresols, p-fcrf-butylphenol, / -phcnylphenol, resorcinol, and cardanol (derived from cashew nut shells) have also been used as precursors for phenolic resins. Alkylphenols with at least three carbons in the substituent lead to more hydrophobic phenolic resins that are compatible with many oils, natural resins, and rubbers.7 Such alkylphenolic resins are used as modifying and crosslinking agents for oil varnishes, as coatings and printing inks, and as antioxidants and stabilizers. Bisphenol-A (2,2-p-hydroxyphenylpropane),... 

Nucleophilic displacement, PQ and PPQ synthesis by, 310-311 Nucleophilic substitution, 10, 282, 283 hyperbranched polyimides via, 308 Nucleophilic synthesis, of bisphenol-A polysulfone, 337... 

Table 16 shows various characteristics of segmented siloxane-(aryl ester) block copolymers. The effect of the variation in the polyester backbone was also studied by replacing bisphenol-A with tetramethyl substituted bisphenol-A. The major difference in these systems was an increase in the high temperature Tg to around 210 to 215 °C 193). 

The diarylation reaction is especicdly common with phenols (the diaryl product here is called a bisphenol). The reaction is normally carried out in alkaline solution on the phenolate ion. The hydroxymethylation of phenols with formaldehyde is called the Lederer-Manasse reaction. This reaction must be carefully controlled, since it is possible for the para and both ortho positions to be substituted and for each of... 

Among the condensation polymers derived from bisphenol-A, poly(arylene ether sulfone) exhibits the best balance between reactivity and backbone stability for subsequent modification. We have shown that electrophilic substitution of the aryleneoxy units,... 

The benzopyran ring is not essential for activity. The pyran oxygen can be substituted by nitrogen or can be eliminated in open-ring mono- or bisphenolic compounds. The recently developed CB2-selective ligand HU-308 (5) is an example of such a bicyclic cannabinoid (Hanus et al., 1999). 

A variety of substituted binaphthol and bisphenol complexes of titanium and zirconium have also been investigated as ethylene polymerization initiators. Of note, (62) and (63) exhibit activities of 350 gmmol-1 h-1 bar-1 and 1,580 gmmol-1 h-1 bar-1.190-192... 

Reaction of 1 with 4-fluorobenzoyl chloride yielded the difluoro-containing monomer 2, which is readily polymerized with a bisphenol using potassium carbonate in /V, /V-dimethy 1 acetamide to yield poly(ether ketone)s. The five poly-(ether ketone)s prepared were soluble in polar aprotic solvents and were cast into flexible, creasable films showing good thermal stability. We have demonstrated that 1 -phenoxy-substituted naphthalene moieties undergo a Friedel-Crafts acyla-... 

The polymers used in this study were prepared by a nucleophilic activated aromatic substitution reaction of a bisphenate and dihalo diphenyl sulfone ( ). The reaction was carried out in an aprotic dipolar solvent (NMP) at 170°C in the presence of potassium carbonate (Scheme 1) (5,6). The polymers were purified by repeated precipitation into methanol/water, followed by drying to constant weight. The bisphenols used were bisphenol-A (Bis-A), hydroquinone (Hq) and biphenol (Bp). Thus, the aliphatic character of Bis-A could be removed while retaining a similar aromatic content and structure. The use of biphenol allows an investigation of the possible effect of extended conjugation on the radiation degradation. 

---