Benzenediazonium ions, reactions

This value is tabulated for various standard reactions (Appendix 4, Table 7) and for the displacement at the benzenediazonium ion the para substituents exhibit resonance stabilisation of the reactant state. The benzenediazonium ion reaction has %R = 54 for the meta and %R = 66 for the para substituents, consistent with increased resonance interaction in the para case. Values of the reaction parameters, f and r, are given in Appendix 4, Table... 

Hydroxythiophene also exists mainly in ketonic forms. Electrophilic reagents react either at oxygen or at C-5. O-Methyl and O-acetyl derivatives are obtained in alkaline solution, probably through intermediacy of the anion. In acidic solution, coupling with benzenediazonium ion, a characteristic phenolic reaction, is found to take place (Scheme 72). 

Pyridine-2- and -4-diazonium ions are far less stable than benzenediazonium ions. Azolediazonium salts generally show intermediate stability provided diazotization is carried out in concentrated acid, many of the usual diazonium reactions succeed. Indeed, azolediazonium salts are often very reactive in coupling reactions. 

Benzenediazonium fluoroborate, 2-carboxy-xanthone synthesis from, 3, 838 Benzenediazonium ions phenyl azide formation from, 5, 839 Benzenediazonium salts, o-(imidazol-l-yl)-intramolecular diazo coupling, 5, 404 Benzene-1,2-disulfonimides N-substituted reactions, 6, 930 Benzene episulfide formation, 7, 577 Benzeneimine... 

More recently Gorelik s group determined the structure of 1-phenylsulfonyl-2-pyrazoline-3-diazonium tetrafluoroborate by X-ray crystallography (Gorelik et al., 1989) and calculated (Glukhovtsev et al. 1990) the heats of the dediazoniation reaction of seven cyclic five-membered diazonium ions (including 2.13, R=H) relative to that of the benzenediazonium ion by the MNDO method (see Sec. 8.4). 

The general applicability of this type of synthesis of quinone diazides is nevertheless limited since, depending on the type and number of substituents in the 2-, 4-, and 6-positions of benzenediazonium ions, either hydroxy-de-diazoniation (reaction A in Scheme 2-20) or nucleophilic substitution of one of the groups in the 2-, 4-, or 6-position (reaction B) will predominate. It is difficult to predict the ratio of the two reactions in a specific case. This is exemplified by two investigations carried... 

Based on observations by Bamberger, Bucherer, and Wolff at the turn of the century, Matrka et al. (1967) described experiments which show that alkaline solutions (pH 8.5-9.2) of substituted benzenediazonium chlorides form nitrite ions and triazenes. The latter is obviously the reaction product of the amine formed in a retro-diazotization with the diazonium ion that is still present. The yield of nitrite formed was between 0.5% (benzenediazonium ion) and 50.2% (2-nitrobenzenediazonium ion). 

Luchkevich et al. (1986, Table 6) demonstrated that for the three isomeric nitro-benzenediazonium ions and their (Z)-diazohxydroxides the acidity constants can be determined by ultraviolet spectrophotometry, by potentiometry, from the kinetics of reaction with hydroxide ions, from the (Z) (E) isomerization kinetics, and from the kinetics of azo coupling reactions. These independent methods gave surprisingly consistent results. ... 

The rapid formation of the (Z)-diazoate is followed by the slower (Z/J )-isomeri-zation of the diazoate (see Scheme 5-14, reaction 5). Some representative examples are given in Table 5-2. Both reactions are first-order with regard to the diazonium ion, and the first reaction is also first-order in [OH-], i.e., second-order overall. So as to make the rate constants k and k5 directly comparable, we calculated half-lives for reactions with [ArNj ]0 = 0.01 m carried out at pH = 9.00 and 25 °C. The isomerization rate of the unsubstituted benzenediazonium ion cannot be measured at room temperature due to the predominance of decomposition (homolytic dediazoniations) even at low temperature. Nevertheless, it can be concluded that the half-lives for (Z/ )-isomerizations are at least five powers of ten greater than those for the formation of the (Z)-diazohydroxide (reaction 1) for unsubstituted and most substituted benzenediazonium ions (see bottom row of Table 5-2). Only for diazonium ions with strong -M type substituents (e.g., N02, CN) in the 2- or 4-position is the ratio r1/2 (5)/t1/2 (1) in the range 6 x 104 to 250 x 104 (Table 5-2). 

Table 5-2. Selected rate constants and half-livese) for some reactions of substituted benzenediazonium ions with buffer solutions (pH 9.00) at 25 °C (rate constants from Virtanen and Kuok-kanen, 1977 half-lives calculated by the present author).

In Scheme 7-1 kx and kn refer to the rate constants for a benzene derivative, in our case the benzenediazonium ion, bearing a substituent X in the 3- or 4-position, and the corresponding unsubstituted benzene derivative respectively. The term p is Hammett s reaction constant for the reaction, and o is Hammett s substituent constant which is, at least in principle, independent of the nature of the reaction but different for the 3- and 4-positions. A plot of log kx (or log kx - log kH) versus o should give a straight line. Its slope (positive or negative) corresponds to the reaction constant p. Equilibrium relationships are treated analogously. 

DSP treatments allow one to separate the field and mesomeric effects of substituents on chemical reactivities and physical properties (electronic and NMR spectra, etc.) of organic compounds. In Section 8.3 we will discuss heterolytic dediazoniation of substituted benzenediazonium ions. For this series of reactions the classical Hammett equation completely fails to give useful results (see Fig. 8-1), but the DSP treatment yields a good and mechanistically very meaningful correlation. 

The first two examples clearly indicate that slight modifications (02 to N2 atmosphere, unsubstituted to 4-nitrosubstituted benzenediazonium ion) can change a heterolytic reaction into a homolytic one. The changeover from heterolytic to homolytic dediazoniation will be discussed in more detail in Section 8.7 of this chapter. The ratio of products in the third example suggests, as indicated in Scheme 8-2, that a DN + AN substitution (A), a reaction via an aryne (B), a o-substitution of the type described by Kovacic and Gormisk (1966) (D), and a... 

Reaction constants pF and pR with opposite signs (but only small differences in magnitude) were later found for dediazoniation in 1,2-dichloroethane (Nakazumi et al., 1987), in 2,2,2-trifluoroethanol (Ravenscroft and Zollinger, 1988), and with 18-crown-6 ether complexes of substituted benzenediazonium ions (Nakazumi et al., 1987). The dediazoniation of substituted phenylazides (forming nitrenes) also... 

On the basis of these redox potentials it seems likely that direct electron release to the benzenediazonium ion takes place only with iodide. This corresponds well with experience in organic synthesis iodo-de-diazoniations are possible without catalysts, light, or other special procedures (Sec. 10.6). For bromo- and chloro-de-di-azoniations, catalysis by cuprous salts (Sandmeyer reaction, Sec. 10.5) is necessary. For fluorination the Balz-Schiemann reaction of arenediazonium tetrafluoroborates in the solid state (thermolysis) or in special solvents must be chosen (see Sec. 10.4). With astatide (211At-), the heaviest of the halide ions, Meyer et al. (1979) found higher yields for astato-de-diazoniation than for iodo-de-diazoniation, a result consistent with the position of At in the Periodic System. It has to be emphasized, however, that in investigations based on measuring yields of final products (Ar-Hal), the possibility that part of the yield may be due to heterolytic dediazoniation is very difficult to quantify. 

On the basis of these results it seems to the present author that inner and outer complexes can reasonably be assumed for the electron transfer to the diazonium ion, but that an outer-sphere mechanism is more likely for metal complexes with a completely saturated coordination sphere of relatively high stability, such as Fe(CN) (Bagal et al., 1974) or ferrocene (Doyle et al., 1987 a). Romming and Waerstad (1965) isolated the complex obtained from a Sandmeyer reaction of benzenediazonium ions and [Cu B ]- ions. The X-ray structural data for this complex also indicate an outer-sphere complex. 

Szele and Zollinger (1978 b) have found that homolytic dediazoniation is favored by an increase in the nucleophilicity of the solvent and by an increase in the elec-trophilicity of the P-nitrogen atom of the arenediazonium ion. In Table 8-2 are listed the products of dediazoniation in various solvents that have been investigated in detail. Products obtained from heterolytic and homolytic intermediates are denoted by C (cationic) and R (radical) respectively for three typical substituted benzenediazonium salts and the unsubstituted salt. A borderline case is dediazoniation in DMSO, where the 4-nitrobenzenediazonium ion follows a homolytic mechanism, but the benzenediazonium ion decomposes heterolytically, as shown by product analyses by Kuokkanen (1989) the homolytic process has an activation volume AF = + (6.4 0.4) xlO-3 m-1, whereas for the heterolytic reaction AF = +(10.4 0.4) x 10 3 m-1. Both values are similar to the corresponding activation volumes found earlier in methanol (Kuokkanen, 1984) and in water (Ishida et al., 1970). 

Where does the hydrogen atom in the product of hydro-de-diazoniation, 2-chloro-nitrobenzene (8.66), come from in CH3OD It was found (Bunnett and Takayama, 1968 b Broxton and Bunnett, 1979) that in the reaction of Scheme 8-47 the deuterium content of 2-chloronitrobenzene was 79%, a figure which is not close to either zero or 100%. For other substituted benzenediazonium ions a very wide range of D incorporation was observed. This range is consistent with hydro-de-diazoniation by both homolytic and a competitive anionic mechanism. The anionic pathway is favored by an increase in methoxide ion concentration. 

The experiments with 2-(3-butenyloxy)benzenediazonium ions (10.55, Z = 0, n = 2, R=H) and benzenethiolate showed a significant shift of the product ratio in favor of the uncyclized product 10.57. They also indicated that the covalent adduct Ar — N2 — SC6H5 is formed as an intermediate, which then undergoes homolytic dissociation to produce the aryl radical (Scheme 10-83). Following the bimolecular addition of the aryl radical to a thiolate ion (Scheme 10-84), the chain propagation reaction (Scheme 10-85) yielding the arylphenylsulfide is in competition with an alternative route leading to the uncyclized product 10.57. 

Laali and Lattimer (1989 see also Laali, 1990) observed arenediazonium ion/crown ether complexes in the gas phase by field desorption (FD) and by fast atom bombardment (FAB) mass spectrometry. The FAB-MS spectrum of benzenediazonium ion/18-crown-6 shows a 1 1 complex. In the FD spectrum, apart from the 1 1 complex, a one-cation/two-crown complex is also detected. Dicyclo-hexano-24-crown-6 appears to complex readily in the gas phase, whereas in solution this crown ether is rather poor for complexation (see earlier in this section) the presence of one or three methyl groups in the 2- or 2,4,6-positions respectively has little effect on the gas-phase complexation. With 4-nitrobenzenediazonium ion, 18-crown-6 even forms a 1 3 complex. The authors assume charge-transfer complexes such as 11.13 for all these species. There is also evidence for hydride ion transfer from the crown host within the 1 1 complex, and for either the arenediazonium ion or the aryl cation formed from it under the reaction conditions in the gas phase in tandem mass spectrometry (Laali, 1990). 

A quantitative study of the azo coupling reactions of heterocyclic diazo compounds was made by Sawaguchi et al. (1971), who measured the coupling rates of seventeen heterocyclic diazonium ions with R-acid (2-naphthol-3,6-disulfonic acid) and compared them with those of the benzenediazonium ion with the same coupling component. All the heterocyclic diazonium ions investigated react faster with R-acid than does the benzenediazonium salt. More recently, Diener and Zollinger (1986) confirmed Sawaguchi s results and interpreted them in more detail. 

Besides the azo coupling reactions of 1-methyl- and 2,5-dimethylpyrrole with benzenediazonium-4-sulfonate mentioned above, Butler et al. (1977) synthesized almost all possible combination products of the unsubstituted and four 4-substituted benzenediazonium ions with pyrrole itself, with most isomeric mono-, di-, and trimethyl-pyrroles, and with 3-ethyl-2,4-dimethylpyrrole. These authors also investigated the kinetics of all these combinations (see Sec. 12.7). 

More recently, Bagal and coworkers (Luchkevich et al., 1991) obtained similar results in a kinetic investigation of the coupling reactions of some substituted benzenediazonium ions with 1,4-naphtholsulfonic acid, and with 1,3,6-, 2,6,8-, and 2,3,6-naphtholdisulfonic acids. The kinetic results are consistent with the transient formation of an intermediate associative product. The maximum concentration of this product reaches up to 94% of the diazonium salt used in the case of the reaction of the 4-nitrobenzenediazonium ion with 1,4-naphtholsulfonic acid (pH 2-4, exact value not given). The authors assume that this intermediate is present in a side equilibrium, i. e., the mechanism of Scheme 12-77 mentioned above rather than that of Scheme 12-76, and that the intermediate is the O-azo ether. 

---