Barium property

OtherAlkaline-Parth Hydrides. Strontium and barium hydrides resemble calcium hydride in properties and reactivity. They have no significant commercial apphcations. 

Sa.lts Salting out metal chlorides from aqueous solutions by the common ion effect upon addition of HCl is utilized in many practical apphcations. Typical data for ferrous chloride [13478-10-9] FeCl2, potassium chloride [7447-40-7] KCl, and NaCl are shown in Table 9. The properties of the FeCl2-HCL-H2 0 system are important to the steel-pickling industry (see Metal SURFACE TREATMENTS Steel). Other metal chlorides that are salted out by the addition of hydrogen chloride to aqueous solutions include those of magnesium, strontium, and barium. 

In general, the chemistry of inorganic lead compounds is similar to that of the alkaline-earth elements. Thus the carbonate, nitrate, and sulfate of lead are isomorphous with the corresponding compounds of calcium, barium, and strontium. In addition, many inorganic lead compounds possess two or more crystalline forms having different properties. For example, the oxides and the sulfide of bivalent lead are frequendy colored as a result of their state of crystallisation. Pure, tetragonal a-PbO is red pure, orthorhombic P PbO is yeUow and crystals of lead sulfide, PbS, have a black, metallic luster. 

Lead zirconate [12060-01 -4] PbZrO, mol wt 346.41, has two colorless crystal stmctures a cubic perovskite form above 230°C (Curie point) and a pseudotetragonal or orthorhombic form below 230°C. It is insoluble in water and aqueous alkaUes, but soluble in strong mineral acids. Lead zirconate is usually prepared by heating together the oxides of lead and zirconium in the proper proportion. It readily forms soHd solutions with other compounds with the ABO stmcture, such as barium zirconate or lead titanate. Mixed lead titanate-zirconates have particularly high piezoelectric properties. They are used in high power acoustic-radiating transducers, hydrophones, and specialty instmments (146). 

Compounds containing such metals as copper, barium, lead, molybdenum, and nickel generally are not used in processing solutions. However, trace quantities of certain metal dopants occasionally are used to impart desired soHd-state and photographic properties to emulsion grains. Because of its... 

In other applications of CT, orally administered barium sulfate or a water-soluble iodinated CM is used to opacify the GI tract. Xenon, atomic number 54, exhibits similar x-ray absorption properties to those of iodine. It rapidly diffuses across the blood brain barrier after inhalation to saturate different tissues of brain as a function of its lipid solubility. In preliminary investigations (99), xenon gas inhalation prior to brain CT has provided useful information for evaluations of local cerebral blood flow and cerebral tissue abnormalities. Xenon exhibits an anesthetic effect at high concentrations but otherwise is free of physiological effects because of its nonreactive nature. 

Calcium—Silicon. Calcium—silicon and calcium—barium—siUcon are made in the submerged-arc electric furnace by carbon reduction of lime, sihca rock, and barites. Commercial calcium—silicon contains 28—32% calcium, 60—65% siUcon, and 3% iron (max). Barium-bearing alloys contains 16—20% calcium, 9—12% barium, and 53—59% sihcon. Calcium can also be added as an ahoy containing 10—13% calcium, 14—18% barium, 19—21% aluminum, and 38—40% shicon These ahoys are used to deoxidize and degasify steel. They produce complex calcium shicate inclusions that are minimally harm fill to physical properties and prevent the formation of alumina-type inclusions, a principal source of fatigue failure in highly stressed ahoy steels. As a sulfide former, they promote random distribution of sulfides, thereby minimizing chain-type inclusions. In cast iron, they are used as an inoculant. 

Strontium [7440-24-6] Sr, is in Group 2 (IIA) of the Periodic Table, between calcium and barium. These three elements are called alkaline-earth metals because the chemical properties of the oxides fall between the hydroxides of alkaU metals, ie, sodium and potassium, and the oxides of earth metals, ie, magnesium, aluminum, and iron. Strontium was identified in the 1790s (1). The metal was first produced in 1808 in the form of a mercury amalgam. A few grams of the metal was produced in 1860—1861 by electrolysis of strontium chloride [10476-85-4]. 

The chemical properties of strontium are intermediate between those of calcium and barium. Strontium is more reactive than calcium, less reactive than barium. Strontium is bivalent and reacts with to form SrH2 [13598-33-9] at reasonable speed at 300—400°C. It reacts with H2O, O2, N2, F, S, and... 

Many other metal thiosulfates, eg, magnesium thiosulfate [10124-53-5] and its hexahydrate [13446-30-5] have been prepared on a laboratory scale, but with the exception of the calcium, barium [35112-53-9] and lead compounds, these are of Httle commercial or technical interest. Although thaHous [13453-46-8] silver, lead, and barium thiosulfates are only slightly soluble, other metal thiosulfates are usually soluble in water. The lead and silver salts are anhydrous the others usually form more than one hydrate. Aqueous solutions are stable at low temperatures and in the absence of air. The chemical properties are those of thiosulfates and the respective cation. 

Other. Insoluble alkaline-earth metal and heavy metal stannates are prepared by the metathetic reaction of a soluble salt of the metal with a soluble alkah—metal stannate. They are used as additives to ceramic dielectric bodies (32). The use of bismuth stannate [12777-45-6] Bi2(Sn02)3 5H20, with barium titanate produces a ceramic capacitor body of uniform dielectric constant over a substantial temperature range (33). Ceramic and dielectric properties of individual stannates are given in Reference 34. Other typical commercially available stannates are barium stannate [12009-18-6] BaSnO calcium stannate [12013 6-6] CaSnO magnesium stannate [12032-29-0], MgSnO and strontium stannate [12143-34-9], SrSnO. ... 

The properties of hydrated titanium dioxide as an ion-exchange (qv) medium have been widely studied (51—55). Separations include those of alkaH and alkaline-earth metals, zinc, copper, cobalt, cesium, strontium, and barium. The use of hydrated titanium dioxide to separate uranium from seawater and also for the treatment of radioactive wastes from nuclear-reactor installations has been proposed (56). 

The main electroceramic apphcations of titanium dioxide derive from its high dielectric constant (see Table 6). Rutile itself can be used as a dielectric iu multilayer capacitors, but it is much more common to use Ti02 for the manufacture of alkaline-earth titanates, eg, by the cocalciuation of barium carbonate and anatase. The electrical properties of these dielectrics are extremely sensitive to the presence of small (<20 ppm) quantities of impurities, and high performance titanates require consistently pure (eg, >99.9%) Ti02- Typical products are made by the hydrolysis of high purity titanium tetrachloride. 

Alkaline-Earth Titanates. Some physical properties of representative alkaline-earth titanates ate Hsted in Table 15. The most important apphcations of these titanates are in the manufacture of electronic components (109). The most important member of the class is barium titanate, BaTi03, which owes its significance to its exceptionally high dielectric constant and its piezoelectric and ferroelectric properties. Further, because barium titanate easily forms solid solutions with strontium titanate, lead titanate, zirconium oxide, and tin oxide, the electrical properties can be modified within wide limits. Barium titanate may be made by, eg, cocalcination of barium carbonate and titanium dioxide at ca 1200°C. With the exception of Ba2Ti04, barium orthotitanate, titanates do not contain discrete TiO ions but ate mixed oxides. Ba2Ti04 has the P-K SO stmcture in which distorted tetrahedral TiO ions occur. 

Barium is prepared commercially by the thermal reduction of barium oxide with aluminum. Barium metal is highly reactive, a property which accounts for its principal uses as a getter for removing residual gases from vacuum systems and as a deoxidiser for steel and other metals. 

Pure barium is a silvery-white metal, although contamination with nitrogen produces a yellowish color. The metal is relatively soft and ductile and may be worked readily. It is fairly volatile (though less so than magnesium), and this property is used to advantage in commercial production. Barium has a bcc crystal stmcture at atmospheric pressure, but undergoes soHd-state phase transformations at high pressures (2,3). Because of such transformations, barium exhibits pressure-induced superconductivity at sufftciendy low temperatures (4,5). 

Additional physical properties of barium are given in Table 1. Owing to the high chemical reactivity of barium, it is not easy to obtain and store highly pure samples of the metal. Therefore, accurate measurement of many physical properties of barium is difficult. 

Barium is a member of the aLkaline-earth group of elements in Group 2 (IIA) of the period table. Calcium [7440-70-2], Ca, strontium [7440-24-6], Sr, and barium form a closely aUied series in which the chemical and physical properties of the elements and thek compounds vary systematically with increa sing size, the ionic and electropositive nature being greatest for barium (see Calcium AND CALCIUM ALLOYS Calcium compounds Strontium and STRONTIUM compounds). As size increases, hydration tendencies of the crystalline salts increase solubiUties of sulfates, nitrates, chlorides, etc, decrease (except duorides) solubiUties of haUdes in ethanol decrease thermal stabiUties of carbonates, nitrates, and peroxides increase and the rates of reaction of the metals with hydrogen increase. 

---