Automated procedures, isolation

The soluble tryptic peptides of 130 mg a chain of Hb-St. Claude were separated on 0.9 x 60 cm columns of Chromobead resin type P (Technlcon Instruments, Dowex 50-X4) at 37°C using the procedure described earlier (16). The method uses a gradient of volatile pyrldlne-acetlc acid buffers of differing molarities and pH as follows first gradient, 666 ml 0.1 M, pH 3.1, and 333 ml 1.0 M, pH 5.0 and second gradient, 166 wl 1.0 M, pH 5.0, and 332 ml 2.0 M, pH 5.0. The amino acid composition of Isolated fragments was determined with a Splnco model 121 automated amino acid analyzer (Beckman Instruments)... 

Iterative procedures hold the potential of automated production as employed reliably and frequently in the case of the Merrifield synthesis. Furthermore, the specific isolation of intermediates and the precise insertion of substituents compensates the enhanced preparative effort compared to polymer syntheses. 

Sample preconcentration was performed by means of an automated on-line SPE sample processor Prospekt-2 (Spark Holland, Emmen, The Netherlands). Oasis HLB cartridges (Waters, Barcelona, Spain) were used to preconcentrate cannabi-noids present in the water samples whereas isolation of the rest of the compounds was done in PLRPs cartridges (Spark Holland). Before extraction, influent samples were diluted with HPLC water (1 9, v/v) to reduce matrix interferences and to fit some analyte concentrations, e.g., cocaine (CO) and benzoylecgonine (BE), within the linear calibration range. A sample volume of 5 mL was spiked with the internal standard mixture (at 20 ng/L) in order to correct for potential losses during the analytical procedure, as well as for matrix effects. Elution of the analytes to the LC system was done with the chromatographic mobile phase. 

Within the last two years since the Sequencer of Beckman Instruments became generally available, the automated method has been successfully applied predominantly to comparisons of homologous proteins such as the immunoglobulins. Elucidation of the sequence of 20 to 30 N-terminal residues in peptides as long as the L-chains, comprising 214 amino acids or the H-chains with more than 400 residues would have been impossible to achieve by the manual procedure without prior cleavage of the molecules and isolation of the N-terminal regions. 

Solid-phase extraction seems to be more suitable for multiresidue cleanup. This procedure has become the method of choice for isolation and/or cleanup of -lactam antibiotics from biological matrices, because it requires low solvent consumption, it is generally less time-consuming and labor-intensive, and offers a variety of alternative approaches that allow better extraction of the more hydrophilic -lactam antibiotics such as ampicillin. It is usually performed using reversed-phase Ci8 (69-71, 80-83, 90, 92-94, 99, 107, 112-116, 121-125) or Cg (103), anion-exchange (95, 124), and polar diol (95) or alumina (101, 113) sorbents. In recent applications, some workers demonstrated the potential of online solid-phase extraction in the determination of monobasic penicillins in bovine muscle tissues using a reversed-phase Cis 5 m cartridge and an automated... 

Grabek et al. [22] has reported a semi-automated isolation procedure and the detection of"strontium in soils. The strontium is leached from soil by employing a water suspension of Amberlite IR-120 and then separating strontium from other cations with Amberlite GC-400 or Dowex. 

---