Aromatic amines structure

There is no information on the exact mechanism of toxicity of quintozene. The aromatic nitro structure of quintozene and the aromatic amine structure of its main metabolite PCA, however, are the common parent structures of known methemoglobinemic agents. Hexachlorobenzene is a major contaminant in the technical material, which may be accountable for some aspects of quintozene s toxicity. 

Numerous CPs having a poly(aromatic amine) structure related to P(ANi) have been synthesized, most by electrochemical polymerization, and a few by oxidants such as Cu(Bp4)2. Indeed the oxidation potential of aromatic amine monomers such as diphenyl amine is so low that their solutions are observed to oligomerize in the presence of air alone [67]. 

Two substituents on two N atoms increase the number of diaziridine structures as compared with oxaziridines, while some limitations as to the nature of substituents on N and C decrease it. Favored starting materials are formaldehyde, aliphatic aldehydes and ketones, together with ammonia and simple aliphatic amines. Aromatic amines do not react. Suitable aminating agents are chloramine, N-chloroalkylamines, hydroxylamine-O-sulfonic acid and their simple alkyl derivatives, but also oxaziridines unsubstituted at nitrogen. Combination of a carbonyl compound, an amine and an aminating agent leads to the standard procedures of diaziridine synthesis. 

On the basis of data obtained the possibility of substrates distribution and their D-values prediction using the regressions which consider the hydrophobicity and stmcture of amines was investigated. The hydrophobicity of amines was estimated by the distribution coefficient value in the water-octanole system (Ig P). The molecular structure of aromatic amines was characterized by the first-order molecular connectivity indexes ( x)- H was shown the independent and cooperative influence of the Ig P and parameters of amines on their distribution. Evidently, this fact demonstrates the host-guest phenomenon which is inherent to the organized media. The obtained in the research data were used for optimization of the conditions of micellar-extraction preconcentrating of metal ions with amines into the NS-rich phase with the following determination by atomic-absorption method. 

The pyromellitic dianhydride is itself obtained by vapour phase oxidation of durene (1,2,4,5-tetramethylbenzene), using a supported vanadium oxide catalyst. A number of amines have been investigated and it has been found that certain aromatic amines give polymers with a high degree of oxidative and thermal stability. Such amines include m-phenylenediamine, benzidine and di-(4-amino-phenyl) ether, the last of these being employed in the manufacture of Kapton (Du Pont). The structure of this material is shown in Figure 18.36. 

A number of aromatic amines also function as cross-linking agents. By incorporating the rigid benzene ring structure into the cross-linked network, products are obtained with significantly higher heat distortion temperatures than are obtainable with the aliphatic amines. 

The cure reaction of structural acrylic adhesives can be started by any of a great number of redox reactions. One commonly used redox couple is the reaction of benzoyl peroxide (BPO) with tertiary aromatic amines. Pure BPO is hazardous when dry [39]. It is susceptible to explosion from shock, friction or heat, and has an autoignition temperature of 79°C. Water is a very effective stabilizer for BPO, and so the initiator is often available as a paste or a moist solid [40], The... 

Potyimides obtained by reacting pyromellitic dianhydride with aromatic amines can have ladder-like structures, and commercial materials are available which may be used to temperatures in excess of 300°C. They are, however, somewhat difficult to process and modified polymers such as the polyamide-imides are slightly more processable, but with some loss of heat resistance. One disadvantage of polyimides is their limited resistance to hydrolysis, and they may crack in aqueous environments above 100°C. 

Aniline and other aromatic amines are valuable industrial raw materials. They form an important starting point from which many of our dyestuffs, medicinals, and other valuable products are prepared. For example, you have used the indicator, methyl orange, in your laboratory experiments. Methyl orange is an example of an anQine-derived dye, although it is used more as an acid-base indicator than for dyeing fabrics. The structure of methyl orange is as follows ... 

Oleinik, E. F. Epoxy-Aromatic Amine Networks in the Classy State Structure and Properties. Vol. 80, pp. 49 — 99. 

The basic principle of all diazotizations of aromatic amines with a hydroxy- or a sulfonamido group in the 4-position relative to the amino group involves a deprotonation of the OH or NH group, respectively, after diazotization of the amino group. There is also a case of a deprotonation of a CH group in the 4-position of an aniline derivative, namely in the diazotization of 4-aminophenylmalononitrile (2.41) which, by the sequence of steps shown in Scheme 2-23, yields 3-diazo-6-dicyanomethylene-1,4-cyclohexadienone (2.42), as found by Hartzler (1964). This product can also be represented by a zwitterionic carbanion-diazonium mesomeric structure. 

In azo couplings with carbonyl compounds, three tautomeric products are possible, compared with only two for phenols and aromatic amines (discussed in Section 12.1). The ketohydrazone 12.75 is most often dominant, but for easily enolizable 1,3-dicarbonyl compounds (X=CO-R and similar structures) the azoenol 12.76 is the major product. The azoketone 12.77 is often postulated as primary product, but has rarely been identified in an unambiguous fashion using modern methods. The CH2 group should be easily detectable in the lH NMR spectrum. 

Secondly, the rates and modes of reaction of the intermediates are dependent on their detailed structure. For example, the stability of the cation radical formed by the oxidation of tertiary aromatic amines is markedly dependent on the type and degree of substitution in the p-position (Adams, 1969b Nelson and Adams, 1968 Seo et al., 1966), and the rate of loss of halogen from the anion radical formed during the reduction of haloalkyl-nitrobenzenes is dependent on the size and position of alkyl substituent and the increase in the rate of this reaction may be correlated with the degree to which the nitro group is twisted out of the plane of the benzene ring (Danen et al., 1969). 

The imidazole ring is a privileged structure in medicinal chemistry since it is found in the core structure of a wide range of pharmaceutically active compounds efficient methods for the preparation of substituted imidazole libraries are therefore of great interest. Recently, a rapid synthetic route to imidazole-4-carboxylic acids using Wang resin was reported by Henkel (Fig. 17) [64]. An excess aliphatic or aromatic amine was added to the commercially available Wang-resin-bound 3-Ar,M-(dimethylamino)isocyano-acrylate, and the mixture was heated in a sealed vial with microwave irradi-... 

Peroxides oxidize TPDD to Wurster s blue, a product with a semiquinone diimine structure [1]. Similarly Wurster s blue is also produced from TPDD by reaction with halogen-containing substances produced by the reaction of aromatic amines and triazines with chlorine gas. 

Kami H, T Watanabe, S Takemura, Y Kameda, T Hirayama (2000) isolation and chemical-structural identification of a novel aromatic amine mutagen in an ozonized solution of m-phenylenediamine. Chem Res Toxicol 13 165-169. 

Attempts have been made to incorporate functional groups into the phosphonates in zinc phosphonate structures. Zn(03P(CH2)2C02H) H20 was reacted with aromatic amines but no amide formation was observed. However, Zn(03P(CH2)2C0NHC6H5) could be synthesized directly from zinc nitrate, (2-carboxyethyl)phosphonic acid, and aniline in a one-step procedure.406... 

---