Anodic oxidation compounds

The purple permanganate ion [14333-13-2], MnOu can be obtained from lower valent manganese compounds by a wide variety of reactions, eg, from manganese metal by anodic oxidation from Mn(II) solution by oxidants such as o2one, periodate, bismuthate, and persulfate (using Ag" as catalyst), lead peroxide in acid, or chlorine in base or from MnO by disproportionation, or chemical or electrochemical oxidation. 

The procedure described is essentially that of Belleau and Weinberg and represents the only known way of obtaining the title compound. One other quinone acetal, 1,4,9,12-t6traoxadispiro[4.2.4.2]tetradeea-6,13-diene, has been synthesized by a conventional method (reaction of 1,4-cyclohexanedione with ethylene glycol followed by bromination and dehydrobromination ) as well as by an electrochemical method (anodic oxidation of 2,2-(l,4-phenylenedioxy)diethanol ). Quinone acetals have been used as intermediates in the synthesis of 4,4-dimethoxy-2,5-cyclohexadienone,. syw-bishomoquinone, - and compounds related to natural products. ... 

The only examples of ring oxidation are the one-electron anodic oxidation of Nl-aryl[l,2,4]triazolo[4,3-a]pyridines such as compound 143 to give quaternary salts (88ZC187), and the voltammetric oxidation of the anti-depressant Trazodone (Section V.A) (87MI1). 

Conversely, the use of elevated temperatures will be most advantageous when the current is determined by the rate of a preceding chemical reaction or when the electron transfer occurs via an indirect route involving a rate-determining chemical process. An example of the latter is the oxidation of amines at a nickel anode where the limiting current shows marked temperature dependence (Fleischmann et al., 1972a). The complete anodic oxidation of organic compounds to carbon dioxide is favoured by an increase in temperature and much fuel cell research has been carried out at temperatures up to 700°C. 

It was also observed that, with the exception of polyacetylene, all important conducting polymers can be electrochemically produced by anodic oxidation moreover, in contrast to chemical methoconducting films are formed directly on the electrode. This stimulated research teams in the field of electrochemistry to study the electrosynthesis of these materials. Most recently, new fields of application, ranging from anti-corrosives through modified electrodes to microelectronic devices, have aroused electrochemists interest in this class of compounds... 

Carboxylic acids can be converted by anodic oxidation into radicals and/or carbo-cations. The procedure is simple, an undivided beaker-type cell to perform the reaction, current control, and usually methanol as solvent is sufficient. A scale up is fairly easy and the yields are generally good. The pathway towards either radicals or carbocations can be efficiently controlled by the reaction conditions (electrode material, solvent, additives) and the structure of the carboxylic acids. A broad variety of starting compounds is easily and inexpensively available from natural and petrochemical sources, or by highly developed procedures for the synthesis of carboxylic acids. 

The electrochemical preparation of metal chalcogenide compounds has been demonstrated by numerous research groups and reviewed in a number of publications [ 1-3]. For the most part, the methods that have been used comprise (a) cathodic co-reduction of the metal ion and a chalcogen oxoanion in aqueous solution onto an inert substrate (b) cathodic deposition from a solvent containing metal ions and the chalcogen in elemental form (the chalcogens are not soluble in water under normal conditions, so these reactions are carried out in non-aqueous solvents) (c) anodic oxidation of the parent metal in a chalconide-containing aqueous electrolyte. 

Anodic processes can also be used for tetraethyllead electrosynthesis. Here solutions of organometallic compounds are used the overall reaction is replacement of the metal in these compounds by another metal, lead. One such process uses a melt of the compound NaAl(C2H5)4, from which radicals QHj are produced anodically. The process is highly efficient, but it is not easy to isolate the TEL produced from the melt. More convenient is a commercial process involving the anodic oxidation of the Grignard reagent C2H5MgCl ... 

Anodic oxidation has been employed for water-soluble triphenyl-methane dyes. It has been shown that the formation of dye is an irreversible two-electron oxidation process.21-23 This method has been used for the oxidation of diamino triphenylmethane leuco compounds containing two to four sulfonic acid groups to obtain food-grade colored materials.24... 

In the concentration step the anodic oxidation must yield between the electrode material (generally Hg) and the analyte anion an insoluble compound... 

Low-valent lanthanides represented by Sm(II) compounds induce one-electron reduction. Recycling of the Sm(II) species is first performed by electrochemical reduction of the Sm(III) species [32], In one-component cell electrolysis, the use of sacrificial anodes of Mg or A1 allows the samarium-catalyzed pinacol coupling. Samarium alkoxides are involved in the transmet-allation reaction of Sm(III)/Mg(II), liberating the Sm(III) species followed by further electrochemical reduction to re-enter the catalytic cycle. The Mg(II) ion is formed in situ by anodic oxidation. SmCl3 can be used in DMF or NMP as a catalyst precursor without the preparation of air- and water-sensitive Sm(II) derivatives such as Sml2 or Cp2Sm. 

The metal is anodically oxidized to ions that react with the components of the solution to yield an insoluble compound forming a surface film on the electrode. 

The mentioned method for synthesis of oxide-hydroxide compounds (Ni, Cr, Co) is more controllable and enables with production of electrode films definite amounts of components. Therefore it guarantees the reproducibility of their compositions and properties. Using the above method we were able to produce the following oxide compounds zero valence metal and lowest oxidation state oxide-hydroxide compounds in cathode process and oxide-hydroxide compounds (in anode process the oxide compounds consist of highest oxidation state oxide-hydroxide compounds). Both type compounds possesses electronic and ionic conductivity. 

Yoshida has studied anodic oxidations in methanol containing cyanide to elucidate the electrode processes themselves.288 He finds that, under controlled potential ( 1.2 V), 2,5-dimethylfuran gives a methoxynitrile as well as a dimethoxy compound (Scheme 57). Cyanide competes for the primary cation radical but not for the secondary cations so that the product always contains at least one methoxy group. On a platinum electrode the cis-trans ratio in the methoxynitrile fraction is affected by the substrate concentration and by the addition of aromatic substances suggesting that adsorption on the electrode helps determine the stereochemistry. On a vitreous carbon electrode, which does not strongly adsorb aromatic species, the ratio always approaches the equilibrium value. 

---