Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Analyzers Hybrid Instruments

For some kinds of analyses, it is convenient to have two combined mass spectrometers. This combination naturally increases costs therefore purchase of such hybrid instruments tends to require much [Pg.281]

Typical Mass Ranges Achievable with Various Analyzers [Pg.282]

However, with z = 10 and m = 10,000, m/z = 1000 and this value is within the range of a quadrupole analyzer. [Pg.282]

When mass spectrometry was first used as a routine analytical tool, El was the only commercial ion source. As needs have increased, more ionization methods have appeared. Many different types of ionization source have been described, and several of these have been produced commercially. The present situation is such that there is now only a limited range of ion sources. For vacuum ion sources, El is still widely used, frequently in conjunction with Cl. For atmospheric pressure ion sources, the most frequently used are ES, APCI, MALDI (lasers), and plasma torches. [Pg.282]


This chapter provides brief descriptions of analyzer layouts for three hybrid instruments. More extensive treatments of sector/TOF (AutoSpec-TOF), liquid chromatography/TOF (LCT or LC/TOF with Z-spray), and quadrupole/TOF (Q/TOF), are provided in Chapters 23, 22, and 21, respectively. [Pg.153]

Scanning techniques are carried out differently with such hybrid instruments as the triple quadrupole analyzer, the Q/TOF (quadrupole and time-of-flight), and double magnetic-sector instruments. [Pg.413]

TOF analyzers are especially compatible with MALDI ion sources and hence are frequently coupled in aMALDI-TOF configuration. Nevertheless, many commercial mass spectrometers combine ESI with TOF with great success. For proteomics applications, the quadrupole TOF (QqTOF) hybrid instruments with their superior mass accuracy, mass range, and mass resolution are of much greater utility than simple TOF instruments.21,22 Moreover, TOF instruments feature high sensitivity because they can generate full scan data without the necessity for scanning that causes ion loss and decreased sensitivity. Linear mode TOF instruments cannot perform tandem mass spectrometry. This problem is addressed by hybrid instruments that incorporate analyzers with mass selective capability (e.g., QqTOF) in front of a TOF instrument. [Pg.382]

Hybrid Mass Spectrometer A tandem mass spectrometer comprised of multiple mass analyzers of different types. A Q-TOF is a hybrid, but a triple quadmpole is not. Ideally, a hybrid instrument harnesses the best features of each mass analyzer type to produce a system perhaps greater than the sum of the parts. [Pg.19]

Mass spectrometers are used not only to detect the masses of proteins and peptides, but also to identify the proteins, to compare patterns of proteins and peptides, and to scan tissue sections for specific masses. MS is able to do this by giving the mass-to-charge ratio of an ionized species as well as its relative abundance. For biological sample analysis, mass spectrometers are connected to an ionizing source, which is usually matrix-assisted laser desorption ionization (MALDI) [14], surface-enhanced laser desorption/ioni-zation (SELDI, a modified form of MALDI) [15], or electrospray ionization [16]. These interfaces enable the transfer of the peptides or proteins from the solid or liquid phase, respectively, to the gas (vacuum) phase inside the mass spectrometer. Both MALDI and electrospray ionization can be connected to different types of mass analyzers, such as quadrupole, quadruple-ion-traps, time of flight (TOF), or hybrid instruments such as quadrupole-TOF or Fourier transform-ion cyclotron resonance. Each of these instruments can... [Pg.163]

In this chapter, a description of the working principles of TOP as well as TOP/ TOP and qTOP analyzers is provided. The latter two, illustrated in Pigure 4.1, are hybrid instruments and have already had a big impact on proteomic research. [Pg.63]

ToF analyzers as well as hybrid instruments that combine two or more mass-resolving components, such as quadrupole-ToF (Q-ToF), ion-mobility ToF, and ion-trap-ToF, as well as the high-resolving Fourier transform (FT) analyzer Orbitrap and ion cyclotron resonance (ICR). For targeted analysis, a multiple-reaction monitoring instrument based on triple-quadrupole technologies (QQQ) has provided unrivaled sensitivity for MSI of pharmaceuticals, yet its targeted nature renders it unsuitable for discovery-based research. [Pg.168]

The types of tandem mass spectrometers capable of performing MS/MS experiments fall into two basic categories tandem in space and tandem in time. Tandem-in-space instruments have discrete mass analyzers for each stage of mass spectrometry examples include multisector, triple-quadru-pole, and hybrid instruments (instruments having mixed types of analyzers such as a magnetic sector and a quadrupole). Tandem-in-time instruments have only one mass analyzer where each stage of mass spectrometry takes place in the same analyzer but is separated in time via a sequence of events. Examples of this type of instrument include Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometers and quadrupole ion traps, described in Chapter 3. [Pg.92]


See other pages where Analyzers Hybrid Instruments is mentioned: [Pg.281]    [Pg.1]    [Pg.281]    [Pg.281]    [Pg.1]    [Pg.281]    [Pg.195]    [Pg.199]    [Pg.243]    [Pg.282]    [Pg.282]    [Pg.153]    [Pg.51]    [Pg.97]    [Pg.231]    [Pg.173]    [Pg.331]    [Pg.147]    [Pg.54]    [Pg.226]    [Pg.91]    [Pg.18]    [Pg.196]    [Pg.81]    [Pg.73]    [Pg.317]    [Pg.403]    [Pg.43]    [Pg.32]    [Pg.88]    [Pg.305]    [Pg.195]    [Pg.200]    [Pg.243]    [Pg.282]    [Pg.282]    [Pg.603]    [Pg.605]    [Pg.116]    [Pg.117]    [Pg.394]    [Pg.3]   


SEARCH



Analyzer hybrid

Hybrid instruments

Instrumentation Analyzer

© 2024 chempedia.info