Amines diamines, aliphatic

The nitration of 1,1,2,2-tetraiodoethylene (182) with 90% nitric acid provides 1,1-diiododinitroethylene (183) in good yield. Baum and co-workers studied the chemistry of 1,1-diiododinitroethylene and found that displacement of the two vinylic iodide groups is effected by treatment with simple aliphatic amines, diamines and anilines to give 1,1-diamino-2,2-dinitroethylenes in excellent yield. Cyclic products are obtained from the reaction of 1,1-diiododinitroethylene with 1,2-diaminoethane (ethylenediamine), 1,3-diaminopropane and 1,4-diaminobutane. The spirocycle (184) is synthesized from the reaction of 1,1-diiododinitroethylene (183) with 2,2-bis(methylamino)-l,3-diaminopropane. 

Using this protocol, primary aliphatic amines, secondary aliphatic amines, and diamines could be converted into the corresponding urea derivatives in moderate yields. Additionally, catalytic efficiency of cations derived from various bases decreases in the order of > diamines > primary amines > secondary amines > aniline, probably being due to the steric effect and basicity. The catalyst could also be recovered after a simple separation procedure, and reused over five times with retention of high activity. This process presented here could show much potential application in industry due to its simplicity and ease of catalyst recycling. 

FER-. TOH-and HTT-type ZEOLITES. The use of amines instead of quaternary ammoniums yields three pentasil zeolites with the FER, TON and HTT structural types ( 23-25). The first two are obtained with the same amine families (aliphatic linear mono-or diamines). A low Si/Al ratio leads to the FER structure, in agreement with VALYOCSIK et al. (26), whereas a high ratio favours the TON structure. The influence of the carbon chain length ( x) of the amine is shown in Figure 3. The composition of the reaction mixture was (1-y) Si02 y A1203 10 H20 3[CH3( CH2) X-1 NH2, IF] or 1 [HH2( CH2) x HH2, 2HF]. ... 

Bryantsev, V.S., Diallo, M.S., Goddard, W.A. pK(a) calculations of aliphatic amines, diamines, and aminoamides via density functional theory with a Poisson-Boltzmann continuum solvent model. J. Phys. Chem. A 2007,111(20), 4422-30. 

The non-microsomal oxidation is catalysed by enzymes that are free in the cellular plasma or by relatively non-specific enzymes present in the mitochondrial fraction of the homogenized tissue of liver cells. Two of these enzymes which are particularly important are monoaminooxidase, catalysing the metabolism of primary amines and controlling the level of biogenic amines, and diaminooxidase, catalysing selectively the oxidation of one out of two amino groups of diamines. Aliphatic alcohols are oxidized by the alcohol dehydrogenase to aldehydes. This reaction is reversible and the same enzyme participates in the reduction of aldehydes and ketones to alcohols [7]. 

Other publications, however, report more accurate values of B3LYP gas phase Gibbs free energy calculations on aliphatic amines, diamines, and aminoamines. In 2007 Bryantsev et al. reported that B3LYP calculations with the basis set 6-31-h-G had a mean absolute error of 0.78 kcal/mol from experimental values of the gas phase basicity (AGg s) of the reverse reaction of equation 1 reported in the NIST database [58]. This accuracy is comparable to that of expensive, high level model chemistries, but because the experimental values have uncertainties of 2 kcal/mol, it is difficult to discern exactly how accurate the calculations are in comparison to values in the other publications [81]. The take-home message remains the same always benchmark DFT calculations for the systems you are interested in computing [52]. 

Aldehydes and ketones react with ammonia and primary amines to form imines. Reaction with aldehydes yields aldimines, and ketimines arise in reactions with ketones (Figure 8.28). Imines derived from aliphatic carbonyl compounds are generally unstable and are transformed to more stable products, such as amines, diamines and others. Secondary amines react with aldehydes and ketones with the formation of enamines (Figure 8.29). Imines are similarly flavour-active compounds derived from furan-2-carbaldehyde. For example, the aromas of Ar-furfuryl(isobutylidene)amine, N-(furfuryl)isopentyhdeneamine (8-155) and N-(furfurylidene)isobutylamine (8-156) reportedly resemble chocolate. 

B) Secondary amines, (i) Aromatic amines. Monomethyl and monoethylaniline, diphenylamine. (ii) Aliphatic and other amines. Diethyhmine, di-n-propylamine, di-isopropylamine. Also piperidine piperazine diethylene-diamine). 

The United States accounts for about a third of the world s consumption of cyclohexane, or 3.785 x 10 m /yr (about 1 biUion gallons per year). U.S. producers and their 1990 capacities are Hsted in Table 13. Texaco has aimounced that it is leaving the cyclohexane business, but the timing is not yet certain. Over 90% of all cyclohexane goes to the production of nylon through either adipic acid (qv) or caprolactam (qv). The balance is used to produce 1,6-hexamethylenediamine [124-09-4] (HMD A) and for various solvent uses (see Diamines and higher amines, aliphatic Polyamides). 

Aliphatic Isocyanates. Aflphatic diisocyanates have traditionally commanded a premium price because the aflphatic amine precursors ate mote expensive than aromatic diamines. They ate most commonly used in appHcafions which support the added cost or where the long-term performance of aromatic isocyanates is unacceptable. Monofuncfional aflphatic isocyanates, such as methyl and -butyl isocyanate, ate used as intermediates in the production of carbamate-based and urea-based insecticides and fungicides (see Fungicides, agricultural Insectcontroltechnology). 

Dehydrofluorination by primary and secondary aliphatic amines occurs at room temperature and is the basis of diamine cross linkmg, which occurs by dehydrofluonnation and subsequent nucleophihc substitution of the double bond The locus of dehydrofluonnation is a VDF unit flanked by two perfluoroolefin units This selectively base-sensitive methylene group also undergoes elimination as the first step in phase-transfer-catalyzed cross-hnking with quaternary ammo mum or phosphomum salts, bisphenols, and morganic oxides and hydroxides as HF acceptors [31, 32]... 

The reaction of ACPC with linear aliphatic amines has been investigated in a number of Ueda s papers [17,35,36]. Thus, ACPC was used for a interfacia] polycondensation with hexamethylene diamine at room temperature [17] yielding poly(amide)s. The polymeric material formed carried one azo group per repeating unit and exhibited a high thermal reactivity. By addition of styrene and methyl methacrylate to the MAI and heating, the respective block copolymers were formed. 

---