Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amides Thionyl chloride

Sodium amide Thionyl chloride Methyl formate Sodium hydroxide... [Pg.1681]

Another method for preparing nitriles is by dehydration of a priman amide. Thionyl chloride is often used for the reaction, although other dehydrating agents such as POCI3 and acetic anhydride also work. [Pg.874]

Dehydration Alumina (see also Dihydropyrane, preparation). Boric acid. Boron triSuoride. N-Bromoacetamide-Pyridine-SOj. Dicyclohexylcarbodiimide. Diketene. Dimethylform-amide-Thionyl chloride. Dimethyl sulfoxide. Ethylene chlorophosphite. Florisil. Girard s reagent. Hydrobromic acid. Iodine. Mesyl chloride-Sulfur dioxide. Methyl chlorosulfite. Methylketene diethylacetal. Naphthalene-d-sulfonic acid. Oxalic acid. Phenyl isocyanate. Phosgene. Phosphorus pentoxide. Phosphoryl chloride. Phthalic anhydride. Potassium bisulfate. Pyridine. Thionyi chloride. Thoria. p-Toluenesulfonic acid. p-Toluenesulfonyl chloride. Triphenylphosphine dibromide. [Pg.1387]

Amides, anilides and p toluidides. The dry acid is first converted by excess of thionyl chloride into the acid chloride ... [Pg.361]

By the dehydration of primary amides with phosphorus pentoxide or with thionyl chloride, for example ... [Pg.407]

Amino-pyridazines and -pyridazinones react with monomethyl- or iV,A-dimethyl-formamide and other aliphatic amides in the presence of phosphorus trichloride, thionyl chloride, phosgene or benzenesuUonyl chloride to give mono- or di-alkylaminomethyl-eneamino derivatives. The same compounds can be prepared conveniently with A,iV-dimethylformamide dimethyl acetal in high yield (Scheme 50). [Pg.35]

Properly substituted isoxazolecarboxylic acids can be converted into esters, acid halides, amides and hydrazides, and reduced by lithium aluminum hydride to alcohols. For example, 3-methoxyisoxazole-5-carboxylic acid (212) reacted with thionyl chloride in DMF to give the acid chloride (213) (74ACS(B)636). Ethyl 3-ethyl-5-methylisoxazole-4-carboxylate (214) was reduced with LAH to give 3-ethyl-4-hydroxymethyl-5-methylisoxazole (215) (7308(53)70). [Pg.52]

Benzisothiazoles are best prepared by oxidative cyclization of o-aminothiobenz-amides (see Section 4.17.9.1.1), reaction of o-toluidines with thionyl chloride (see Section 4.17.9.2.1) or by sulfuration of 2,1-benzisoxazoles (see Section 4.17.10.2). 1,2-Benzisothiazoles can also be prepared from o-disubstituted benzene compounds, cyclodehydration of o-mercaptobenzaldoximes or oxidative cyclization of p-mercaptobenzylamines (see Section 4.17.9.1.1) being the most convenient. Both series of benzo compounds are readily substituted at the 5- and 7-positions by electrophilic reagents. [Pg.173]

Altanserin (100) is a representative of the thiaquinazolinones. This serotonin antagonist is said to prevent gastric lesions. One method for preparation of this compound involves first preparation of isothiocyanate derivative 99, by reacting 4-fluorobenzoylpiperidine with 2-bromoethylamine and then converting the intermediate to the isothiocyanate with thionyl chloride and base. Condensation of 99 with methyl anthranilate (98) probably proceeds initially to a thiourea. Cyclization by ester-amide interchange leads to altanserin (100) [28]. [Pg.151]

Diethanol methylamine Sodium amide Sulfuric acid Hydrogen chloride Thionyl chloride Benzyl cyanide Ethanol ... [Pg.932]

A classical procedure for the synthesis of the A-(1-chloroalkyl)amides1 or carbamates68 involves substitution of the hydroxy group in stable A-( 1-hydroxyalkyl)amides (or carbamates) by a halogen function with reagents such as thionyl chloride, phosphorus pentachloride, phosphorus pentabromide, etc. In certain cases merely heating in concentrated hydrochloric or hydrobromic acid suffices1. [Pg.815]

Many procedures for the formation of carboxylic acid amides are known in the literature. The most widely practiced method employs carboxylic acid chlorides as the electrophiles which react with the amine in the presence of an acid scavenger. Despite its wide scope, this protocol suffers from several drawbacks. Most notable are the limited stability of many acid chlorides and the need for hazardous reagents for their preparation (thionyl chloride, oxalyl chloride, phosgene etc.) which release corrosive and volatile by-products. Moreover, almost any other functional group in either reaction partner needs to be protected to ensure chemoselective amide formation.2 The procedure outlined above presents a convenient and catalytic alternative to this standard protocol. [Pg.137]

The by-products are both gaseous and the excess of thionyl chloride (b.p. 78°) may be readily removed by distillation. Interaction of the acid chloride with ammonia solution, aniline or p-toluidiiie yields the amide, anilide or p-toluidide respectively ... [Pg.361]

The traditional method for transforming carboxylic acids into reactive acylating agents capable of converting alcohols to esters or amines to amides is by formation of the acyl chloride. Molecules devoid of acid-sensitive functional groups can be converted to acyl chlorides with thionyl chloride or phosphorus pentachloride. When milder conditions are necessary, the reaction of the acid or its sodium salt with oxalyl chloride provides the acyl chloride. When a salt is used, the reaction solution remains essentially neutral. [Pg.243]

Amide bond is an effective anchor to connect CNTs to substrate surfaces. Lan et al. [52] covalently assembled shortened multi-walled carbon nanotubes (s-MWNT) on polyelectrolyte films. The shortened MWNT is functionalized with acyl chloride in thionyl chloride (SOCl2) before self-assembling. The FTIR spectrum of self-assem-bled MWNT (SA-MWNT) adsorbed on a CaF2 plate modified with PEI/(PSS/PEI)2 shows two characteristic absorption peaks at 1646cm-1 (amide I bond) and 1524cm-1 (amide II bond) resulting from the amide bond formed between the polyelectrolyte films and s-MWNTs. [Pg.514]

Ester 324 is hydrolyzed to acid 325 by refluxing in 10% NaOH. In a reaction with thionyl chloride, acid 325 is converted to acid chloride 326, which is isolated as a solid in 96% yield and consecutively converted into amide 327 in 85% yield. Treatment of amide 327 with LDA extracts a proton from the methyl group. The generated anion is trapped by added benzonitrile. Subsequent cyclocondensation of the obtained imine anion with the amide group provides derivative 328 in 62% isolated yield (Scheme 50) <2003EJM983>. [Pg.43]

In contrast to uridine,389 cytidine does not yield a 5 -chloro-5 -deoxy derivative on reaction with N,N-dimethyl(chlorometh-animinium) chloride instead 2,2 -anhydrocytidine is formed.395 However, thionyl chloride or bromide in hexamethylphosphor-amide at room temperature achieves this selective replacement of the primary hydroxyl group of halogen in cytidine, and also in adenosine, in respective yields of 80 and 75% for the chloro compounds, and 55 and 30% for the bromo analogs.396... [Pg.83]

The treatment of diethyl A/-(4-carboxy-3-hydroxyphenyl)aminomethy-lenemalonate with thionyl chloride at reflux for 2 hr afforded the acid chloride (1542), which then was reacted with ammonium hydroxide or anilines in dry acetone at ambient temperature for 1 hr to give the corresponding amide (1543) (75IJC1275). [Pg.316]

Di-2-pyridyl sulphite (343) (from 2-pyridone and thionyl chloride in the presence of triethylamine) transforms primary aliphatic and aromatic amines RNH2 into N-sulphinylamines RN=S=0 and it dehydrates amides ArCONH2 to aryl cyanides, aldehyde oximes RCH=NOH (R = Cxlf 7. 4-MeOCgH4 or PhCH=CH) to the cyanides RCN and A-alkyl- and TV-ary Iformamides RNHCHO to isocyanides RNC. Aliphatic and aromatic... [Pg.602]


See other pages where Amides Thionyl chloride is mentioned: [Pg.163]    [Pg.597]    [Pg.163]    [Pg.163]    [Pg.163]    [Pg.597]    [Pg.163]    [Pg.163]    [Pg.401]    [Pg.143]    [Pg.465]    [Pg.115]    [Pg.80]    [Pg.127]    [Pg.128]    [Pg.250]    [Pg.932]    [Pg.1325]    [Pg.1317]    [Pg.126]    [Pg.802]    [Pg.105]    [Pg.401]    [Pg.260]    [Pg.241]    [Pg.149]    [Pg.42]    [Pg.105]    [Pg.156]    [Pg.252]    [Pg.899]   
See also in sourсe #XX -- [ Pg.297 ]




SEARCH



Amidation activation using thionyl chloride

Amide chlorides

Thionyl

Thionyl Chloride reactions with secondary amides

Thionyl amide

Thionyl chloride

Thionyl chloride amide synthesis

Thionyl chloride reaction with amides

Thionyl chloride with amides

Thionyls

© 2024 chempedia.info