Amidation with amines

Nucleophilic attack of ammonia or of a primary or secondary amine on an O-alkyl thiocarboxylate (2) provides a formally straightforward approach to thioamides and a number of examples have been reported (equation l). - However, some limitations should be noted. Thus, there is a tendency of esters (2) to rearrange to their 5-alkyl isomers on heating (cf. Volume 6, Chapter 2.5) and these yield amides with amines rather than thioamides. Besides, excess primary amine will lead to amidine formation, or the tetrahedral intermediate of the substitution reaction may break down to an imidate rather than a thioamide (cf. Volume 6, Chapter 2.7). These unwanted side reactions are favoured in polar, protic solvents such as ethanol. In contrast, THF has proven to be particularly useful in the synthesis of tertiary thioamides according to equation (1). For improved reactivity in the preparation of V-aryl derivatives and milder reaction conditions, it is advantageous to employ the amine in the form of its Mg salt. ... 

Ni-carbonyl (danger, toxic) followed by l-bromo-4-/ r/-butylcyclohexene added under argon to a soln. of Na-methoxide in dry methanol, warmed 6 hrs. to 60°, cooled to 25°, and CO bubbled through the mixture for 0.5 hr. to dispel excess Ni-carbonyl and decompose Ni-containing side products methyl 4-tert-butyl-1-cyclohexenecarboxylate. Y 71%. F. e., also amides with amines in place of ale. alkali alkoxides, and nitriles, also limitations, s. E. J. Corey and L. S. Hegedus, Am. Soc. 91, 1233 (1969). 

Transamidations of amides with amines, as well as of carboxylic acids with amides, have been reported. 

CO. Alkynes will react with carbon monoxide in the presence of a metal carbonyl (e.g. Ni(CO)4) and water to give prop>enoic acids (R-CH = CH-C02H), with alcohols (R OH) to give propenoic esters, RCH CHC02R and with amines (R NH2) to give propenoic amides RCHrCHCONHR. Using alternative catalysts, e.g. Fe(CO)5, alkynes and carbon monoxide will produce cyclopentadienones or hydroquinols. A commercially important variation of this reaction is hydroformyiation (the 0x0 reaction ). 

By treatment of an amide with sodium hypobromite or sodium hypochlorite solution (or with the halogen and alkali), the amine of one less carbon atom is produced, the net result being the elimination of the carbonyl group. An example is ... 

The trick used is to acylate the amine instead, since we can reduce the resulting amide with LiAIH, to give the product we want ... 

In these cases the acyl azides formed have been used to prepare amines via Curtius rearrangement. The acyl chloride or azide intermediates can. however, also be reacted with amines or alcohols to form amides or esters. 

Section 20 12 Esters react with amines to give amides... 

Although acetonitrile is one of the more stable nitriles, it undergoes typical nitrile reactions and is used to produce many types of nitrogen-containing compounds, eg, amides (15), amines (16,17) higher molecular weight mono- and dinitriles (18,19) halogenated nitriles (20) ketones (21) isocyanates (22) heterocycles, eg, pyridines (23), and imidazolines (24). It can be trimerized to. f-trimethyltriazine (25) and has been telomerized with ethylene (26) and copolymerized with a-epoxides (27). 

Transamidation. Polyacrylamide reacts with primary amines such as hydrazine [302-01-2], N2H4, (54) and hydroxjlamine [7803-49-8]. NH O, (55—57) to form substituted amides with loss of ammonia. 

Reactions with Amines and Amides. Hydroxybenzaldehydes undergo the normal reactions with aUphatic and aromatic primary amines to form imines and Schiff bases reaction with hydroxylamine gives an oxime, reaction with hydrazines gives hydrazones, and reactions with semicarbazide give semicarbazones. The reaction of 4-hydroxybenzaldehyde with hydroxylamine hydrochloride is a convenient method for the preparation of 4-cyanophenol (52,53). 

The biochemical basis for the toxicity of mercury and mercury compounds results from its ability to form covalent bonds readily with sulfur. Prior to reaction with sulfur, however, the mercury must be metabolized to the divalent cation. When the sulfur is in the form of a sulfhydryl (— SH) group, divalent mercury replaces the hydrogen atom to form mercaptides, X—Hg— SR and Hg(SR)2, where X is an electronegative radical and R is protein (36). Sulfhydryl compounds are called mercaptans because of their ability to capture mercury. Even in low concentrations divalent mercury is capable of inactivating sulfhydryl enzymes and thus causes interference with cellular metaboHsm and function (31—34). Mercury also combines with other ligands of physiological importance such as phosphoryl, carboxyl, amide, and amine groups. It is unclear whether these latter interactions contribute to its toxicity (31,36). 

The zwitterion (6) can react with protic solvents to produce a variety of products. Reaction with water yields a transient hydroperoxy alcohol (10) that can dehydrate to a carboxyUc acid or spHt out H2O2 to form a carbonyl compound (aldehyde or ketone, R2CO). In alcohoHc media, the product is an isolable hydroperoxy ether (11) that can be hydrolyzed or reduced (with (CH O) or (CH2)2S) to a carbonyl compound. Reductive amination of (11) over Raney nickel produces amides and amines (64). Reaction of the zwitterion with a carboxyUc acid to form a hydroperoxy ester (12) is commercially important because it can be oxidized to other acids, RCOOH and R COOH. Reaction of zwitterion with HCN produces a-hydroxy nitriles that can be hydrolyzed to a-hydroxy carboxyUc acids. Carboxylates are obtained with H2O2/OH (65). The zwitterion can be reduced during the course of the reaction by tetracyanoethylene to produce its epoxide (66). 

Poly(phenylene oxide)s undergo many substitution reactions (25). Reactions involving the aromatic rings and the methyl groups of DMPPO include bromination (26), displacement of the resultant bromine with phosphoms or amines (27), lithiation (28), and maleic anhydride grafting (29). Additional reactions at the open 3-position on the ring include nitration, alkylation (30), and amidation with isocyanates (31). 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Amides are formed with amines, often with strong base assistance (319,320). Occasionally Cp groups are lost (321—332) ... 

Pyrimido[4,5- f]pyrimidines may be used as pyrimidine precursors. Thus, the dihydro derivative (736) undergoes alkaline hydrolysis to the amide (737 R = PrCO) which may be deacylated in ethanolic hydrogen chloride to give 5-aminomethyl-2-propylpyrimidin-4-amine (737 R = H) (64CPB393) rather similarly, the pyrimidopyrimidinedione (738) reacts with amines to give, for example, 6-amino-5-benzyliminomethyl-l,3-dimethylpyrimidine-2,4(lFf,3Ff)-dione (739 R = CH2Ph) or the hydrazone (739 R = NH2) (74JCS(Pl)1812). 

Acid chlorides are useful reagents, but when the pyrazole is N- unsubstituted a dimerization occurs and the diketopiperazine (254) is isolated (Section 4.04.2.3.3(x)). However, (254) reacts with many compounds as an acid chloride would, for example with amines to yield amides (67HC(22)l). The difunctional pyrazole derivative (441) affords polymers by reaction with diphenols (69RRC763). Cyanopyrazoles can be hydrolyzed to the corresponding carboxylic acids (68CB829). 

The term aminoplastics has been coined to cover a range of resinous polymers produced by interaction of amines or amides with aldehydes. Of the various polymers of this type that have been produced there are two of current commercial importance in the field of plastics, the urea-formaldehyde and the melamine-formaldehyde resins. There has in the past also been some commercial interest in aniline-formaldehyde resins and in systems containing thiourea but today these are of little or no importance. Melamine-phenol-formaldehyde resins have also been introduced for use in moulding powders, and benzoguanamine-based resins are used for surface coating applications. 

Nickel peroxide is a solid, insoluble oxidant prepared by reaction of nickel (II) salts with hypochlorite or ozone in aqueous alkaline solution. This reagent when used in nonpolar medium is similar to, but more reactive than, activated manganese dioxide in selectively oxidizing allylic or acetylenic alcohols. It also reacts rapidly with amines, phenols, hydrazones and sulfides so that selective oxidation of allylic alcohols in the presence of these functionalities may not be possible. In basic media the oxidizing power of nickel peroxide is increased and saturated primary alcohols can be oxidized directly to carboxylic acids. In the presence of ammonia at —20°, primary allylic alcohols give amides while at elevated temperatures nitriles are formed. At elevated temperatures efficient cleavage of a-glycols, a-ketols... 

This amide is readily prepared from the acid chloride (Pyr, rt, 1 h, 77-86% yield) or the acid (DCC, DMAP, CH2CI2, rt, 1 h, 88% yield). Treatment of the amide with camphorsulfonic acid forms an A-acylindole. The acid can be regenerated from the A-acylindole by Li0H/H202/THF/H20 or NaOH/MeOH. Alternatively, it can be transesterified with MeOH/TEA, converted to an amide, by heating with an amine or converted to an aldehyde by DIB AH (62-85% yield). ... 

It should be noted that furoxan amides and hydrazides could only be prepared in aqueous solution. In ether solution, reaction of diethyl furoxandicarboxylate with amines and hydrazine derivatives have been shown to give isoxazolones 93 (Scheme 45) (08CB3512, 09LA52, 09LA80). 

---