Alumina acid strength

We have explored rare earth oxide-modified amorphous silica-aluminas as "permanent" intermediate strength acids used as supports for bifunctional catalysts. The addition of well dispersed weakly basic rare earth oxides "titrates" the stronger acid sites of amorphous silica-alumina and lowers the acid strength to the level shown by halided aluminas. Physical and chemical probes, as well as model olefin and paraffin isomerization reactions show that acid strength can be adjusted close to that of chlorided and fluorided aluminas. Metal activity is inhibited relative to halided alumina catalysts, which limits the direct metal-catalyzed dehydrocyclization reactions during paraffin reforming but does not interfere with hydroisomerization reactions. 

The titration of silica-alumina acid sites with neodymium oxide is clearly seen in Figure 4. The relative acid strength, as estimated by the 2,3DMB2/4MP2 ratio during 2MP2... 

As an additional probe of metal activity, we monitored benzene hydrogenation activity. As seen in Figure 9, Pt-containing rare earth catalysts have lower hydrogenation activity than chlorided alumina catalysts this result reflects inhibition of metal activity on these supports relative to conventional transitional alumina supports. Whereas the acid strength can be adjusted close to that of chlorided and flourided aluminas, metal activity is somewhat inhibited on these catalysts relative to halided aluminas. This inhibition is not due to dispersion, and perhaps indicates a SMSI interaction between Pt and the dispersed Nd203 phase. 

These seemingly conflicting results are due to the heterogenous nature of the surface of alumina which contains centers of different acid strengths. Since catalytic activity is known to depend on acid strength... 

The study of the product distribution from the isomerization of 3,3-dimethylbutene proved useful for evaluating the strength of the acid centers in aluminas (36). Pure alumina from aluminum isopropoxide which was calcined at 700° showed optimum activity. Heating at higher temperatures decreased the number of acid sites as well as their acid strength. Aluminas obtained from potassium or sodium aluminate contained alkali in amounts of 0.08 to 0.65%, depending on the way of precipitation and on the number of washings. 

Katranas,T.K.,Triantafyllidis, K.S., Vlessidis, A.G., and Evmiridis, N.P. (2007) Propane reactions over faujasite structure zeolites type-X and USY effect of zeolite silica over alumina ratio, strength of acidity and kind of exchanged metal ion. Catal. Lett., 118,79-85. 

Coordination causes electron-spin density redistribution in the N-O fragment the contribution of resonance structure II increase. The redistribution of spin density results in changes in the parallel component of the nitrogen hyperfine tensor. TEMPO and anthraquinone (AQ) have been used in this way to probe the Lewis acidity of alumina and Li and Mg doped alumina matrices.176 The differences in the Lewis acidic strength towards TEMPO and anthraquinone are discussed. An interesting study has appeared aimed to study the guest-host interaction between poly(amidoamine) dendrimers labelled with nitroxides and several porous solids including alumina.177... 

Maciel (117) described the formation of the trityl cation 16 on silica-alumina in a 1984 symposium in retrospect it is surprising that no one followed up on this work until much later. 16 easily forms from triphenylcar-binol and other precursors in solutions of modest acid strength. The early observation of such an easy cation had the unintended effect of suggesting that real carbenium ions would not so easily be detected in NMR studies of solid acids. Over a decade elapsed before we characterized the rert-butyl cation on A1C13 powder (43). 

Aluminosilicates are the active components of amorphous silica—alumina catalysts and of crystalline, well-defined compounds, called zeolites. Amorphous silica—alumina catalysts and similar mixed oxide preparations have been developed for cracking (see Sect. 2.5) and quite early [36,37] their high acid strength, comparable with that of sulphuric acid, was connected with their catalytic activity. Methods for the determination of the distribution of the acid sites according to their strength have been found, e.g. by titration with f-butylamine in a non-aqueous medium using adsorbed Hammett indicators for the H0 scale [38],... 

Solid metal sulphates and phosphates also exhibit acid—base properties their acid strength is lower than that of silica—alumina but they are stronger acids than some oxide catalysts [5]. Correlation of activity with electronegativity of cations has been obtained for several reactions [9, 50,51],... 

Rates of model reactions are more commonly used to determine relative rather than absolute surface acidities and a variety of acid-catalyzed reactions have been used for this purpose (1-3). Xylene isomerization is a particularly well-substantiated model reaction, thanks to work by Ward and Hansford (43). They demonstrated that the conversion of o-xylene to p- and /n-xylenes over a series of synthetic silica-alumina catalysts increases as the alumina content is increased from 1 to 7%. The number of strong Brdnsted acids in each member of the catalyst series was measured by means of infrared spectroscopy. Since conversion of o-xylene was found to be a straight-line function of the number of Br0nsted acids (see Fig. 9), rate of xylene isomerization appears to be a valid index of the amount of surface acidity for this catalyst series. This correlation also indicates that the acid strengths of these silica-alumina preparations are roughly equivalent. 

The work of Misono et al. (55) illustrates how acid strength distributions for silica-alumina catalyst can be deduced from catalytic titration measurements by use of an appropriate series of reactants. Surface concentration of amine, pyridine in this case, was adjusted by proper choice of amine partial pressure and desorption temperature while carrier gas flowed over the catalyst sample. At each level of chemisorbed pyridine, pulses of the reactants were passed over silica-alumina at 200°C and the products analyzed. The reactants were t-butylbenzene, diisobutylene, butenes, and f-butanol. It was concluded that skeletal transformations require the presence of very strong acid sites, that double-bond isomerization occurs over moderately strong acid sites, and that alcohol dehydration can occur on weak acid sites. 

Silica-alumina Amine titration with Hammett indicators extension of the acid strength scale 69... 

---