Allylstannanes chloride

The allylstannane 474 is prepared by the reaction of allylic acetates or phosphates with tributyltin chloride and Sml2[286,308] or electroreduction[309]. Bu-iSnAlEt2 prepared in situ is used for the preparation of the allylstannane 475. These reactions correspond to inversion of an allyl cation to an allyl anion[3l0. 311], The reaction has been applied to the reductive cyclization of the alkenyl bromide in 476 with the allylic acetate to yield 477[312]. Intramolecular coupling of the allylic acetate in 478 with aryl bromide proceeds using BuiSnAlEti (479) by in situ formation of the allylstannane 480 and its reaction with the aryl bromide via transmetallation. (Another mechanistic possibility is the formation of an arylstannane and its coupling with allylic... 

Since the double-bond configuration is established in the final elimination step from a /t-silicon-(or tin-) substituted carbenium ion in a conformation of lowest energy, often high E selectivity is observed. In reactions of allylstannanes, catalyzed by tin(TV) chloride or titanium(IV) chloride, occasionally a metal exchange occurs, followed by the pericyclic addition pathway leading to the iwti-diastereomers17 19. A more detailed discussion is given in Section D.1.3.3.3.5. 

Allylsilanes or allylstannanes in the presence of a bidentate Lewis acid such as tin(IV) chloride, titanium(IV) chloride, zinc chloride, and magnesium bromide as well as diallylzinc, are promising choices (Table 1). 

Displacement of secondary allyl halides is satisfactory for the formation of symmetric allylstannanes, e.g., ( )-tributyl(l-mcthyl-2-butcnyl)stannane17, but can give 1,3-rearranged products in other cases, e.g., from 3-chlorobutene and trimethyltin reagents14 lS. Allylic cyclohexenyl chlorides react with triphenyltin lithium with clean inversion and little 1,3-transformation19,20. 

Two approaches for the synthesis of allyl(alkyl)- and allyl(aryl)tin halides are thermolysis of halo(alkyl)tin ethers derived from tertiary homoallylic alcohols, and transmetalation of other allylstannanes. For example, dibutyl(-2-propenyl)tin chloride has been prepared by healing dibutyl(di-2-propenyl)stannane with dibutyltin dichloride42, and by thermolysis of mixtures of 2,3-dimethyl-5-hexen-3-ol or 2-methyl-4-penten-2-ol and tetrabutyl-l,3-dichlorodistannox-ane39. Alternatively dibutyltin dichloride and (dibutyl)(dimethoxy)tin were mixed to provide (dibutyl)(methoxy)tin chloride which was heated with 2,2,3-trimethyl-5-hexen-3-ol40. 

Both allylstannane transmetalation and thermolysis of homoallyl stannoxanes have been used to prepare 2-butenyltin halides as (E)j(Z) mixtures44-45. The reaction between 2-butenyl-(tributyl)stannane and dibutyltin dichloride initially provides dibutyl(l-methyl-2-propenyl)tin chloride as the kinetic product by an SE2 process, but this isomerizes under the reaction conditions to give a mixture containing the (Z)- and (E)-2-butenyl isomers46. 

Treatment of allyl bromides with the complex obtained from tin(II) chloride and the disodium salt of diethyl 2,3-dihydroxybutanedioate gives an intermediate which reacts with aldehydes to provide homoallylic alcohols with 50-65% ee. Lower enantiomeric excesses were obtained with bulky aldehydes and for allylstannanes with y-substituents. Pentacoordinated allyltin complexes may be involved97. 

With 2,3-[isopropylidenebis(oxy)]propanal the facial selectivity of the allylstannane generated from tin(II) chloride, the disodium salt of diethyl 2,3-dihydroxybutanoatc, and 3-bromo-1-propene (see preceding section) is overwhelmed by the facial selectivity of the substrate97. Some selectivity was observed in coupling monosaccharide derived allylstannanes with monosaccharide aldehydes99. 

Allyltrialkoxy- or -tris(dialkylamino)titanium reagents are not capable of chelation-controlled addition reactions with oxy- or amino-substituted carbonyl compounds due to their low Lewis acidity87. To attain chelation control, the application of allylsilanes (Section 1.3.3.3.5.2.2.) and allylstannanes (Section I.3.3.3.6.I.3.2.) in the presence of bidentate Lewis acids like titanium(IV) chloride, tin(lV) chloride or magnesium bromide are the better options. 

Formation of a vinyl-substituted pyrrolizidine derivative is also observed in case of an allylstan-nane cyclization94. Since the allylstannane moiety is acid sensitive, the iV-acyliminium ion is generated by exposure of the hydroxylactam to methanesulfonyl chloride and triethylamine in dichloromethane. The very rapid cyclization produces the endo-vinyl compound with very high stereoselectivity. 

The majority of catalytic enantioselective allylation reactions involve the chiral Lewis-acid-catalysed additions of allylsilanes or allylstannanes to carbonyl compounds. Monothiobinaphthol has been used by Woodward et al. as a chiral promoter in the enantioselective catalytic allylation of aryl ketones with impure Sn(allyl)4, prepared from allyl chloride, air-oxidised magnesium and SnCl4. Therefore, the allylation of arylketones in these conditions was achieved very efficiently, since the corresponding allylic alcohols were formed in... 

The indium-mediated allylation carried out with allylstannanes in combination with indium chloride in aqueous medium was reported by Marshall et al.113 Allylindium was proposed as the reaction intermediate. Various aldehydes can be alkylated very efficiently with 3-bromo-2-chloro-l-propene mediated by indium in water at room temperature. Subsequent treatment of the compound with ozone in methanol followed by workup with sodium sulfite provided the desired hydroxyl ester in high yield.114... 

The palladium-catalyzed multicomponent coupling reactions have attracted considerable interest.12,12a 12e A reaction using allylstannane 39 and allyl chloride 40 was applied to the three-component diallylation of benzylidenema-lonitrile and its congeners by Yamamoto et al 2 Analogous diallylation of isocyanate 41 was studied by Szabo et al. (Scheme 7).12a The reaction mechanism can be explained by formation of an amphoteric bis-allylpalladium intermediate 43 which undergoes an initial electrophilic attack on one of the allyl moieties followed by a nucleophilic attack on the other. 

Mayr has reviewed the nucleophilicity parameters of allylstannanes and related compounds.276 The allyl-tin bond is easily cleaved, and this has been exploited in the preparation of pentafluorophenyltin chlorides and bromides (Equation (98)).277... 

The catalytic activity of the trityl moiety was unobjectionably adjusted in the addition reaction of the allylstannanes to aldehydes [148]. In this allylation process the trityl chloride 52, due to its disposition to partially ionic character of the halogen bonding, was employed as a catalyst in the complementary tandem with weak Lewis acid TMSCl (Scheme 57). The excess of the silyl component was necessary in order to release the trityl catalyst from the intermediate to complete the catalytic cycle. The achieved yield was 93%, when trityl chloride 52 was used. 

The titanium(IV) chloride catalyzed reaction of allylstannane 22 and aldehyde 23 to give a 3.5 1 mixture of adducts 24 and 25, which is related to example . Here again, two stereogenic centers (a and b) are created and the relative disposition of the substituents at positions a and b (syn or anti), and with respect to the configuration of the starting materials, had to be determined (see pp465 and 474)119. 

Alkyl halides possessing / -hydrogens are usually poor substrates for carbonylative cross-coupling due to competitive / -hydride elimination/ Allyl chlorides can be used in carbonylative cross-coupling with allylstannanes/ phenyl-, 3-furyl, or vinylstannanes " to afford allylketones in modest to good yields. Divinylketones can be accessed through the reaction of vinylstannanes with vinyl iodides or vinyl triflates, with the latter requiring the addition of LiCl. Synthetic potential of this method has been proved in the formation of macrocyclic ketone jatrophone. In the reaction of vinyl triflates with tetramethyltin or aryltrimethylstannanes the additional activation by ZnCle is required. 

Allylation of Pyranosyl Compounds with Allylstannane [19,20]. A solution of the methyl-(p-D-galactopyranosyl chloride) onate 22 (953.5 mg, 1.8 mmol) in 30 mL of dry, oxygen-free THF, was heated to 60°C. To this solution under nitrogen, were added the tributylallyl tin 23 (5.2 mL, 14.7 mmol) and A1BN (15 mg, 0.1 mmol). After 20 h, the solvent was evaporated, and the residue was taken up in 5 mL of acetonitrile. The acetonitrile layer was extracted with 20 mL of n-hexane and then concentrated. Chromatography on silica gel (toluene-acetone, 4 1) afforded the product 24 (889 mg, 93%), containing two anomers. Nuclear magnetic resonance (NMR) spectroscopy showed a ratio of the two anomers of 1.8 1. 

Conversion of allylic acetates of allylstannanes by treatment with Et2AlSnBus and Pd° catalysts proceeds by addition of the tin to the metal, followed by reductive elimination (equation 204).309 The corresponding ally phosphonate, however, showed some loss of stereochemical integrity (equation 205).310 The Pd°-catalyzed reaction of allylic acetates, trialkyltin chlorides and Smh produced allylstannanes with no stereospecificity.311... 

The mechanism of this transformation is outlined in Scheme 38 and each step has important features. In step 1, the tributyltin radical abstracts the radical precursor X. A possible side reaction, the addition of the tributyltin radical to the allylstannane, is much slower than comparable additions to activated alkenes. Even if this addition occurs, the stannyl radical is simply eliminated to regenerate the starting materials. Thus, for symmetric allylstannanes, this reaction is of no consequence. As a result, the range of precursors X that can be used in allylation is more extensive than in the tin hydride method. Even relatively unreactive precursors like chlorides and phenyl sulfides can be used if they are activated by adjacent radical-stabilizing groups. 

Methyl groups at the position of electrophilic attack exert exactly the same enthalpic and entropic effects as in the alkene series (Table 4), and one can summarize that the attack of carbocations at alkenes and at allylsi-lanes, allylgermanes, and allylstannanes follows the same mechanism. The differences between these classes of nucleophiles are encountered after the rate-determining step While ordinary carbocations (produced from alkenes) usually accept a chloride ion to give addition products, the /3-metal-substituted carbocations are generally demetalated to yield the Se2 products. It has been reported, however, that j8-silyl-substituted carbe-nium ions with bulky substituents at silicon may also act as chloride acceptors with the consequence that in these cases allylsilanes yield addition products in the same way as ordinary alkenes do [159],... 

There are very few examples of Lewis base-promoted allylations of aldehydes with allylstannanes. In 1992 Baba disclosed an intriguing method for allylation of aldehydes with allyl- and 2-butenyltributylstannanes in the presence of catalytic-amounts of dibutyltin dichloride and certain coactivators such as tetrabutylammo-nium iodide, tributylphosphine oxide, HMPA or tetraphenylphosphonium iodide [76]. No definitive mechanistic information is available on the role of the co-activators the authors speculate that the ligands accelerate the metathesis to form allyldibutyltin chloride which is the actual nucleophile. The same group has recently reported the use of a lead(II) iodide/HMPA catalyst for the allylation of a,yff-epoxyketones [76bj. 

The allylation of an aldehyde can be carried out by the direct reaction of tin with an allyl bromide in aqueous ethanol or in water,10 or in the absence of any solvent.11 Allylation can also be achieved by generating the allylstannane reagent in situ from tin(II) chloride and the appropriate allyl bromide.12 13 The reaction can be carried out with the more accessible but less reactive allyl chloride if sodium iodide is added, which converts the chloride into the iodide.14... 

An alternative solution is to use organotin reagents supported on an insoluble, but porous, polymer at the end of the reaction, the polymer can be filtered off, and the catalyst can be regenerated.72 Most of the work in this field has involved polymer-bound tin hydrides (for hydrogenolysis of halides, thiocarbonyl compounds, or hydrostannation of ketones),73-76 but also tin chlorides (for use as Lewis acids),77 allylstannanes (for allyla-... 

A number of investigations have explored the reactions of ally lie stannanes containing a y-alkoxy substituent. A direct preparation of these substances utilizes the kinetic deprotonation of an allyl ether followed by alkylation with tri-n-butylstannyl chloride. In a typical experiment, the deprotonation of 101 with 5-butyllithium leads to internal coordination of lithium cation and provides formation of the Z-allylstannane 102. The behavior of y-alkoxyallylstannanes is similar to the corresponding Z-alkylstannanes, and as a result, the reaction provides a stereoselective route for the synthesis of complex diol derivatives. In the allylation of chiral aldehyde 80 with stannane 102, /l-chelation dictates face selectivity. The expected. yyn, anti-product 104 is obtained with high diastereoselection via the antiperi-planar 103, which accommodates the sterically demanding silyl (TBS) ether (Scheme 5.2.23).23... 

---