Allyl nickel catalysts

Many recent publications have described the stereospecific polymerization of dienes by ir-allyl compounds derived from Cr, Nb, Ni, etc. Of particular interest is the work of Durand, Dawans, Teyssie who have shown that ir-allyl nickel catalysts (XXI) in the presence of certain additives polymerize butadiene stereospecifically (87, 38). The active center results from reaction of acidic additives with the transition metal. 

Reaction of 3 with 1 equivalent of a phosphine results in formation of "phosphine-modified catalysts (4). The complex formed from 7r-allyl-nickel chloride, tricyclohexylphosphine, and methylaluminum dichloride (4a) has been isolated and its structure determined crystallographically (see Fig. 1) (57) The phosphine is bonded to the nickel atom, and interaction with the Lewis acid takes place via a chlorine bridge. The bridging chlorine atom is almost symmetrically bound to both the nickel... 

Examples of w-allylnickel-X compounds (X = anionic ligand) other than 77-allylnickel halides which have been used in combination with (alkyl)aluminum halides as olefin oligomerization catalysts are 7r-allyl-nickel acetylacetonate (11) (Section III), 7r-allylnickel aziridide (4, 56), and bis(7r-allyl)nickel (6) (59). In addition to ir-allylnickel halides, organo-nickel halides such as tritylnickel chloride (60, 61) and pentafluoro-phenylbis(triphenylphosphine)nickel bromide (62), or hydridonickel halides, e.g., trans-hydridobis(triisopropylphosphine)nickel chloride (12) (Section III), give active catalysts after activation with aluminum halides... 

The following conclusions can be drawn (a) ir-Allylnickel compounds are probably not involved in the catalytic dimerization of cyclooctene, because the highest reaction rate occurs when only traces of these compounds can be detected further, the concentration of the new 7r-allyl-nickel compound (19) becomes significant only after the catalytic reaction has ceased, (b) The complex formed between the original 7r-allylnickel compound (11) and the Lewis acid is transformed immediately upon addition of cyclooctene to the catalytically active nickel complex or complexes. In contrast to 7r-allylnickel compounds, this species decomposes to give metallic nickel on treatment of the catalyst solution with ammonia, (c) The transformation of the catalytically active nickel complex to the more stable 7r-allylnickel complex occurs parallel with the catalytic dimerization reaction. This process is obviously of importance in stabilizing the catalyst system in the absence of reactive olefins. In... 

The nickel catalyst under the condition for the 1 1 codimerization is not known to dimerize or polymerize ethylene, although a similar catalyst system has been known to dimerize propylene (26, 27) via a w-allyl intermediate. 

Desymmetrization of cyclic allyl acetals such as 2-substituted 4,7-hydrodioxepins or 5-methylene-1,3-dioxanes was investigated using ruthenium or nickel catalysts. The isomerization of the dioxanes was accomplished using Ru2Cl4(DIOP)/LiBHEt3 in high yield with up to 38% ee (Equation (22)).81... 

A similar set of reactions has been carried out with cyclic allyl ethers and alkylmagnesium halides using the same nickel catalyst, however, the optical yields are generally low (< 60 %)21 with the exception of the following example213. The optical purity and configuration of the product was established by chemical correlation with 3-ethvlhexanedioic acid. 

Mori has reported the nickel-catalyzed cyclization/hydrosilylation of dienals to form protected alkenylcycloalk-anols." For example, reaction of 4-benzyloxymethyl-5,7-octadienal 48a and triethylsilane catalyzed by a 1 2 mixture of Ni(GOD)2 and PPhs in toluene at room temperature gave the silyloxycyclopentane 49a in 70% yield with exclusive formation of the m,//7 //i -diastereomer (Scheme 14). In a similar manner, the 6,8-nonadienal 48b underwent nickel-catalyzed reaction to form silyloxycyclohexane 49b in 71% yield with exclusive formation of the // /i ,// /i -diastereomer, and the 7,9-decadienal 48c underwent reaction to form silyloxycycloheptane 49c in 66% yield with undetermined stereochemistry (Scheme 14). On the basis of related stoichiometric experiments, Mori proposed a mechanism for the nickel-catalyzed cyclization/hydrosilylation of dienals involving initial insertion of the diene moiety into the Ni-H bond of a silylnickel hydride complex to form the (7r-allyl)nickel silyl complex li (Scheme 15). Intramolecular carbometallation followed by O-Si reductive elimination and H-Si oxidative addition would release the silyloxycycloalkane with regeneration of the active silylnickel hydride catalyst. 

Based on the formal analogy between the intermolecular hydrovinylation and the intramolecular cycloisomerization process, we have chosen catalysts with proven potential for the first reaction type [48, 51] as the starting point of our study. The results are summarized in Table 2.1.5.7 [64]. Despite its excellent performance in the hydrovinylation of styrene [51], the [ Ni(allyl) Br 2]/(Ra, Sc, Sc)-26/NaBARF system led to disappointingly low conversions and selectivities in the cycloisomerization of 27a (entry 1). Similarly, the [ Ni(allyl)Cl 2]/(Ra,Rc)-4cel/Na-BARF system is not effective for the cycloisomerization of 27a (entry 2) even though it is able to promote the hydrovinylation. The other diastereomer, (R ,Sc)-4cel, however, which forms an active nickel catalyst for styrene oligomerization... 

Instead of quenching with deuterium chloride, the intermediary organomonozinc compound can be used as a new nucleophile. Not only allylic halide but also alkenyl or aryl halide can be used as the first electrophile with bis(iodozincio)methane (3). In Scheme 23, examples for sequential coupling are summarized. In the case of coupling with bromoalkene, a nickel catalyst is more effective than a palladium catalyst. 

Numerous metal-catalyzed reactions of organic halides with carbon monoxide and olefins, acetylenes, aldehydes, etc., have been carried out (21). Only two of these, however, appear to have been developed into generally useful reactions. One is the reaction of allylic halides with carbon monoxide and acetylene in alcoholic solution with a nickel catalyst (22,23). This reaction produces cis-2,5-hexadienoate esters at atmospheric pressure in good yields ... 

Allyl cyanides can be added across alkynes in the presence of a nickel catalyst prepared from (COD)2Ni and (4-CF3CeH4)3P in situ to give functionalized di- or tri-substituted acrylonitriles in a highly stereoselective manner, presumably via n-allylnickel intermediates. a-Siloxyallyl cyanides also react at the y -position of a cyano group with both internal and terminal alkynes to give silyl enol ethers, which can be converted into the corresponding aldehydes or ketones upon hydrolysis.70... 

A reasonable mechanism for the co-oligomerization of butadiene with ethylene on a naked-nickel catalyst is shown in Eq. (49). Interaction of an ethylene molecule with the bis(7r-allyl) C8 chain produces a C,0 chain, containing both an alkyl- and a 7r-allylnickel group (XLVI). Coupling of the alkyl bond with the terminal atom of a m-Tr-allyl group or the terminal... 

Ligands with good acceptor character (e.g., triphenylphosphite, Table IX) stabilize the m-7r-allyl, cr-alkyl intermediate (XLVIb) and only CDD is formed. The stabilization introduced by triphenylphosphite is so effective that even at elevated temperatures (60° C) practically no DT results, while a naked-nickel catalyst at the same temperature produces DT and CDD in about equal proportions. 

In principle pentadienyls can bond to transition elements in at least three basic ways, tj3, and tjs (Fig. 1). These can be further subdivided when geometrical factors are considered. If r 5 coordination could be converted to rj3 orr/1, one or two coordination sites could become available at the metal center, and perhaps coordinate substrate molecules in catalytic processes. Little is known about the ability of pentadienyl complexes to act as catalysts. Bis(pentadienyl)iron derivatives apparently show naked iron activity in the oligomerization of olefins (144), resembling that exhibited by naked nickel (13). The pentadienyl groups are displaced from acyclic ferrocenes by PF3 to give Fe(PF3)5 in a way reminiscent of the formation of Ni(PF3)4 from bis(allyl)nickel (144). 

Two other Ni(CO)4 substitutes, Ni(CO)3PPh3 and Ni(COD)2/dppe, prove to be appropriate for the catalysis of tandem metallo-ene/carbonylation reactions of allylic iodides (Scheme 7)399. This process features initial oxidative addition to the alkyl iodide, followed by a metallo-ene reaction with an appropriately substituted double or triple bond, affording an alkyl or vinyl nickel species. This organonickel species may then either alkoxycar-bonylate or carbonylate and undergo a second cyclization on the pendant alkene to give 51, which then alkoxycarbonylates. The choice of nickel catalyst and use of diene versus enyne influences whether mono- or biscyclization predominates (equations 200 and 201). 

Examples of the use of platinum and nickel catalysts are seen in the hydrogenation of 2-allyl-2,6-dimethylcyclohexanone to 2-propyl-2,6-dimethylcyclohexanone over platinum oxide (eq. 3.48)207 and 2-allylcyclohexanone to 2-propylcyclohexanone over Raney Ni (eq. 3.49).208... 

Cobalt catalysts are generally accepted to be more selective than nickel catalysts in the hydrogenation of a,P-unsaturated aldehydes to allylic alcohols.69 Hotta and Kubomatsu found that 2-methyl-2-pentenal was selectively hydrogenated to 2-... 

---