Aldol reaction examples

The enamine geometry 32 is cmcial for the stereocontrol in organocatalytic aldehyde-aldehyde couplings amines of type 31 are convenient catalysts for enantioselective enamine-aldol reactions. Examples are shown in Scheme 24 [126,131,132,133,134,135]. 

Complexation of a,p-unsaturated carbonyl compounds with ATPH provided an interesting regio- and stereoselective vinylogous aldol reaction. Examples are shown in Scheme 6.21. In the case of both E- and Z-isomer of aldehyde (23a), the major aldol adducts (24a) from E-(23a) and (25a) from Z-(23a) are derived via y-E-selective deprotonation of the ATPH complexes, respectively. On the other hand, the ester derivative (23b) followed the y-methyl-selective deprotonation and aldolization process giving rise to the same Z product (26b) from both E- and Z-isomers of ester (23b). 

Here we will illustrate the method using a single example. The aldol reaction between an enol boronate and an aldehyde can lead to four possible stereoisomers (Figure 11.32). Many of these reactions proceed with a high degree of diastereoselectivity (i.e. syn anti) and/or enantioselectivity (syn-l syn-Tl and anti-l anti-lT). Bernardi, Capelli, Gennari,... 

In the last fifteen years macrolides have been the major target molecules for complex stereoselective total syntheses. This choice has been made independently by R.B. Woodward and E.J. Corey in Harvard, and has been followed by many famous fellow Americans, e.g., G. Stork, K.C. Nicolaou, S. Masamune, C.H. Heathcock, and S.L. Schreiber, to name only a few. There is also no other class of compounds which is so suitable for retrosynthetic analysis and for the application of modem synthetic reactions, such as Sharpless epoxidation, Noyori hydrogenation, and stereoselective alkylation and aldol reactions. We have chosen a classical synthesis by E.J. Corey and two recent syntheses by A.R. Chamberlin and S.L. Schreiber as examples. 

Aldehydes fiad the most widespread use as chemical iatermediates. The production of acetaldehyde, propionaldehyde, and butyraldehyde as precursors of the corresponding alcohols and acids are examples. The aldehydes of low molecular weight are also condensed in an aldol reaction to form derivatives which are important intermediates for the plasticizer industry (see Plasticizers). As mentioned earlier, 2-ethylhexanol, produced from butyraldehyde, is used in the manufacture of di(2-ethylhexyl) phthalate [117-87-7]. Aldehydes are also used as intermediates for the manufacture of solvents (alcohols and ethers), resins, and dyes. Isobutyraldehyde is used as an intermediate for production of primary solvents and mbber antioxidants (see Antioxidaisits). Fatty aldehydes Cg—used in nearly all perfume types and aromas (see Perfumes). Polymers and copolymers of aldehydes exist and are of commercial significance. 

Many commercially important isobutyraldehyde derivatives are prepared through aldol and/or Tischenko condensation reactions. For example, isobutyraldehyde undergoes the aldol reaction to form isobutyraldol (2,2,4-trimethyl-3-hydroxypentanal [918-79-6]) which, when hydrogenated, gives 2,2,4-trimethyl-1,3-pentanediol (TMPD) [144-19-4],... 

The dimer of 1-methyl- -pyrroline (39) was obtained by reduction of N-methylpyrrole with zinc and hydrochloric acid (132) and, together with the trimer, by mercuric acetate dehydrogenation of N-methylpyrrolidine (131). J -Pyrroline-N-oxides form dimers in a similar manner (302). Treatment of 1,2-dimethyl-zl -piperideine with formaldehyde, producing l-methyl-3-acetylpiperidine (603), serves as an example of a mixed aldol reaction (Scheme 18). 

Furthermore, in analogy to the aldol reaction, a-chloro-a,3-unsaturated esters have been observed—likely the result of 3-elimination of water from the intermediate halohydrin. For example, when benzaldehyde is condensed with the enolate of 17, chloride 19 was obtained. ... 

In recent years, several modifications of the Darzens condensation have been reported. Similar to the aldol reaction, the majority of the work reported has been directed toward diastereo- and enantioselective processes. In fact, when the aldol reaction is highly stereoselective, or when the aldol product can be isolated, useful quantities of the required glycidic ester can be obtained. Recent reports have demonstrated that diastereomeric enolate components can provide stereoselectivity in the reaction examples include the camphor-derived substrate 26, in situ generated a-bromo-A -... 

The mechanism of the Feist-Benary reaction involves an aldol reaction followed by an intramolecular 0-alkylation and dehydration to yield the furan product. In the example below, ethyl acetoacetate (9) is deprotonated by the base (B) to yield anion 10 this carbanion reacts with chloroacetaldehyde (8) to furnish aldol adduct 11. Protonation of the alkoxide anion followed by deprotonation of the [i-dicarbonyl in 12 leads to... 

If only one of the two aldehydes has an a-hydrogen, only two aldols can be formed and numerous examples have been reported, where the crossed aldol reaction is the major pathway. For two different ketones, similar considerations do apply in addition to the unfavorable equilibrium mentioned above, which is why such reactions are seldom attempted. 

For example in the so-called Mukaiyama aldol reaction of an aldehyde R -CHO and a trimethylsilyl enol ether 8, which is catalyzed by Lewis acids, the required asymmetric environment in the carbon-carbon bond forming step can be created by employing an asymmetric Lewis acid L in catalytic amounts. 

Diketones 1 can be converted into the salt of an a-hydroxy carboxylic acid upon treatment with alkali hydroxide after acidic workup the free a-hydroxy carboxylic acid 2 is obtained. A well-known example is the rearrangement of benzil (R, R = phenyl) into benzilic acid (2-hydroxy-2,2-diphenyl acetic acid). The substituents should not bear hydrogens a to the carbonyl group, in order to avoid competitive reactions, e.g. the aldol reaction. 

Since most often the selective formation of just one stereoisomer is desired, it is of great importance to develop highly selective methods. For example the second step, the aldol reaction, can be carried out in the presence of a chiral auxiliary—e.g. a chiral base—to yield a product with high enantiomeric excess. This has been demonstrated for example for the reaction of 2-methylcyclopenta-1,3-dione with methyl vinyl ketone in the presence of a chiral amine or a-amino acid. By using either enantiomer of the amino acid proline—i.e. (S)-(-)-proline or (/ )-(+)-proline—as chiral auxiliary, either enantiomer of the annulation product 7a-methyl-5,6,7,7a-tetrahydroindan-l,5-dione could be obtained with high enantiomeric excess. a-Substituted ketones, e.g. 2-methylcyclohexanone 9, usually add with the higher substituted a-carbon to the Michael acceptor ... 

Aldehydes and ketones with an a hydrogen atom undergo a base-catalyzed carbonyl condensation reaction called the aldol reaction. For example, treatment of acetaldehyde with a base such as sodium ethoxide or sodium hydroxide in a protic solvent leads to rapid and reversible formation of 3-hydroxybutanal, known commonly as aldol (aidehyde + alcohol), hence the general name of the reaction. 

In general, a mixed aldol reaction between two similar aldehyde or ketone partners leads to a mixture of four possible products. For example, base treatment of a mixture of acetaldehyde and propanal gives a complex product mixture containing two "symmetrical" aldol products and two "mixed" aldol products. Clearly, such a reaction is of no practical value. 

The aldol reactions we ve seen thus far have all been intermolecular, meaning that they have taken place between two different molecules. When certain r/zcar-bonyl compounds are treated with base, however, an mtramolecular aldol reaction can occur, leading to the formation of a cyclic product. For example, base treatment of a 1,4-diketone such as 2,5-hexanedione yields a cyclopcntenone... 

The Stork enamine reaction and the intramolecular aldol reaction can be carried out in sequence to allow the synthesis of cyclohexenones. For example, reaction of the pyrrolidine enamine of cyclohexanone with 3-buten-2-one. followed by enamine hydrolysis and base treatment, yields the product indicated. Write each step, and show the mechanism of each. 

The achiral molybdenum enolate 2 reacts with benzophenone and benzaldehyde at —78 °C to yield the x,/i-unsaturated molybdenum-acyl complexes34, which presumably arise via elimination of hydroxide from unobserved aldolate intermediates such as 3. No examples of such aldol reactions with complexes that are chiral at molybdenum have been reported. 

Another SBU with open metal sites is the tri-p-oxo carboxylate cluster (see Section 4.2.2 and Figure 4.2). The tri-p-oxo Fe " clusters in MIL-100 are able to catalyze Friedel-Crafts benzylation reactions [44]. The tri-p-oxo Cr " clusters of MIL-101 are active for the cyanosilylation of benzaldehyde. This reaction is a popular test reaction in the MOF Hterature as a probe for catalytic activity an example has already been given above for [Cu3(BTC)2] [15]. In fact, the very first demonstration of the catalytic potential of MOFs had aheady been given in 1994 for a two-dimensional Cd bipyridine lattice that catalyzes the cyanosilylation of aldehydes [56]. A continuation of this work in 2004 for reactions with imines showed that the hydrophobic surroundings of the framework enhance the reaction in comparison with homogeneous Cd(pyridine) complexes [57]. The activity of MIL-lOl(Cr) is much higher than that of the Cd lattices, but in subsequent reaction rans the activity decreases [58]. A MOF with two different types of open Mn sites with pores of 7 and 10 A catalyzes the cyanosilylation of aromatic aldehydes and ketones with a remarkable reactant shape selectivity. This MOF also catalyzes the more demanding Mukaiyama-aldol reaction [59]. 

Even an entirely different enzyme can be changed to the one that has enolase activity. One representative example is the changing of a lipase to an aldolase utilizing the basicity of the catalytic triad via a simple mutation. The resulting promiscuous lipase has been demonstrated to catalyze the aldol reaction and Michael addition as shown in Fig. 23. 

In 1991, Kobayashi el al. prepared novel chiral S/N ligands for the tin-mediated aldol reaction of silyl enol ethers with aldehydes. As an example, the reaction of benzaldehyde afforded the expected syn aldol product as the major product with a good yield and an enantioselectivity of up to 92% ee (Scheme 10.26). Moreover, other aldehydes such as substituted benzaldehydes or aliphatic unsaturated aldehydes were converted into their corresponding aldol products with enantioselectivities of more than 90% ee. It was checked that the corresponding diamine ligands provided less active complexes for the same reactions. 

Table 50.1 shows two sets of conditions for carrying out the prohne-mediated aldol reaction in Scheme 1, employing the same catalyst concentration but different initial concentrations of the two reactants chosen such that the value of the excess, [e], is the same in the two experiments. Note that more conventionally reported parameters - for example, the number of equivalents of acetone and the catalyst mol% - are not the same for the two experiments. 

From these and many related examples the following generalizations can be made about kinetic stereoselection in aldol additions of lithium enolates. (1) The chair TS model provides a basis for analyzing the stereoselectivity observed in aldol reactions of ketone enolates having one bulky substituent. The preference is Z-enolate syn aldol /(-enolate anti aldol. (2) When the enolate has no bulky substituent, stereoselectivity is low. (3) Z-Enolates are more stereoselective than /(-enolates. Table 2.1 gives some illustrative data. 

Scheme 2.2 illustrates several examples of the Mukaiyama aldol reaction. Entries 1 to 3 are cases of addition reactions with silyl enol ethers as the nucleophile and TiCl4 as the Lewis acid. Entry 2 demonstrates steric approach control with respect to the silyl enol ether, but in this case the relative configuration of the hydroxyl group was not assigned. Entry 4 shows a fully substituted silyl enol ether. The favored product places the larger C(2) substituent syn to the hydroxy group. Entry 5 uses a silyl ketene thioacetal. This reaction proceeds through an open TS and favors the anti product. 

A particularly important example of the intramolecular aldol reaction is the Robinson annulation, a procedure that constructs a new six-membered ring from a ketone.171 The reaction sequence starts with conjugate addition of the enolate to methyl... 

Mixed condensations of esters are subject to the same general restrictions as outlined for mixed aldol reactions (Section 2.1.2). One reactant must act preferentially as the acceptor and another as the nucleophile for good yields to be obtained. Combinations that work best involve one ester that cannot form an enolate but is relatively reactive as an electrophile. Esters of aromatic acids, formic acid, and oxalic acid are especially useful. Some examples of mixed ester condensations are shown in Section C of Scheme 2.14. Entries 9 and 10 show diethyl oxalate as the acceptor, and aromatic esters function as acceptors in Entries 11 and 12. 

---